TE Connectivity 1-499345-0 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1-499345-0 is a rectangular connector header, right-angle configuration, with 50 positions at 2.54mm pitch. This through-hole, shrouded connector is designed for board-to-cable/wire applications with solder termination and latch lock/eject hook fastening. The part is currently active in production with 1137 units in stock.

Equivalent and substitute parts are necessary when the primary part number becomes unavailable, when alternative packaging formats are required, or when compliance requirements differ between applications. This reference provides direct equivalents and functionally compatible alternatives from multiple manufacturers.

Substiute Parts

1-499345-0

TE Connectivity AMP ConnectorsIn Stock: 11611-499345-0 Datasheet

Current PartRFQ

1-5499345-0

TE Connectivity AMP ConnectorsIn Stock: 10021-5499345-0 Datasheet

DirectRFQ

09185506901

HARTINGIn Stock: 125009185506901 Datasheet

SimilarRFQ

09185506903

HARTINGIn Stock: 97909185506903 Datasheet

SimilarRFQ

09185506913

HARTINGIn Stock: 127509185506913 Datasheet

SimilarRFQ

09185507913

HARTINGIn Stock: 91209185507913 Datasheet

SimilarRFQ

09195506913

HARTINGIn Stock: 117709195506913 Datasheet

SimilarRFQ

71922-150LF

Amphenol ICC (FCI)In Stock: 113071922-150LF Datasheet

SimilarRFQ

D3433-5302-AR

3MIn Stock: 1190D3433-5302-AR Datasheet

SimilarRFQ

N3433-5202RB

3MIn Stock: 1362N3433-5202RB Datasheet

SimilarRFQ

N3433-5302RB

3MIn Stock: 1764N3433-5302RB Datasheet

SimilarRFQ

N3433-5303RB

3MIn Stock: 1348N3433-5303RB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of rectangular connectors in this category is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Number of positions: 50
• Number of rows: 2
• Pitch - mating: 0.100" (2.54mm)
• Row spacing - mating: 0.100" (2.54mm)
• Connector type: Header
• Contact type: Male Pin
• Mounting type: Through Hole, Right Angle
• Shrouding: Shrouded - 4 Wall
• Termination: Solder
• Style: Board to Cable/Wire
• Material flammability rating: UL94 V-0

Allowable Variations:

• Manufacturer and series designation
• Packaging format (Tray, Bulk, Tube)
• Contact finish specifications (Gold, Tin, Gold-Palladium)
• Insulation material composition (PBT, PCT, Polyester variants)
• Insulation color
• Contact post length (within mechanical compatibility range)
• Fastening hook length (Short vs. Long)
• RoHS and REACH compliance status
• Operating temperature range (when equal or exceeding -65°C ~ 105°C)

Substitutes are grouped by manufacturer and series. All listed parts maintain electrical and mechanical compatibility with the primary part number 1-499345-0.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent - Same Manufacturer:

The part number 1-5499345-0 from TE Connectivity AMP Connectors is a direct equivalent to 1-499345-0. The primary difference is RoHS3 compliance status and packaging format (Tray). Selection of 1-5499345-0 is appropriate for applications requiring RoHS3 compliance or when tray packaging is preferred over the original packaging specification.

Cross-Manufacturer Substitutes - HARTING SEK Series:

The HARTING SEK series parts (09185506901, 09185506903, 09185506913, 09185507913, 09195506913) are functionally equivalent rectangular connectors with identical pitch, position count, and mounting configuration. All HARTING parts are ROHS3 compliant and feature an extended operating temperature range of -55°C ~ 125°C, exceeding the original part specification. Differences include contact post length variations (0.114" to 0.177") and fastening hook configurations (Short vs. Long). Selection depends on specific mechanical clearance requirements and packaging preference (Tray or Bulk).

Cross-Manufacturer Substitutes - Amphenol ICC (FCI) Quickie™ Series:

The part number 71922-150LF from Amphenol ICC (FCI) is a functionally equivalent connector in the Quickie™ series. This part features gold GXT™ contact finish and is RoHS compliant. Packaging is supplied in Tube format. Contact mating length is 0.228" (5.80mm), which is slightly shorter than the original specification of 0.240" (6.10mm). This part is suitable for applications where tube packaging is acceptable and the contact mating length variation does not affect mechanical compatibility.

Cross-Manufacturer Substitutes - 3M 3000 Series:

The 3M parts (D3433-5302-AR, N3433-5202RB, N3433-5302RB) are functionally equivalent connectors with identical pitch and position configuration. These parts feature a higher current rating of 1.75A per contact compared to the original 1A specification. Operating temperature range is -55°C ~ 105°C. The 3M parts are RoHS compliant or ROHS3 compliant depending on the specific part number. Packaging options include Tray (D3433-5302-AR) and Bulk (N3433-5202RB, N3433-5302RB). These parts are suitable for applications requiring higher current capacity or when 3M connector ecosystem integration is preferred.

Compliance Considerations:

Applications requiring RoHS3 compliance should select from: 1-5499345-0, 09185506901, 09185506903, 09185506913, 09185507913, 09195506913, D3433-5302-AR, N3433-5202RB, or N3433-5302RB.

Applications with REACH compliance requirements should verify specific part selection, as REACH status varies across manufacturers.

Frequently Asked Questions (FAQ)

Q: Can I substitute 1-5499345-0 for 1-499345-0 in existing designs?

A: Yes. The 1-5499345-0 is a direct equivalent with identical electrical and mechanical specifications. The primary difference is RoHS3 compliance status. Packaging format differs (Tray vs. unspecified), but connector functionality remains identical. No design changes are required.

Q: What is the difference between HARTING SEK series parts with "Short" versus "Long" fastening hooks?

A: The fastening hook length affects the mechanical engagement depth with the mating connector. "Short" hooks (09185506913, 09185507913) provide reduced engagement depth, while "Long" hooks (09185506901, 09185506903) provide extended engagement. Selection depends on the mating connector specification and mechanical clearance constraints in the application.

Q: Are HARTING SEK series parts pin-compatible with the TE Connectivity AMP-Latch series?

A: Yes. All HARTING SEK series parts maintain identical pitch (2.54mm), position count (50), row configuration (2 rows), and mounting type (Through Hole, Right Angle). Pin-to-pin compatibility is confirmed. However, contact post length variations (0.114" to 0.177") may affect mechanical fit with specific mating connectors. Verify mating connector specifications before substitution.

Q: What is the significance of the contact post length difference between 1-499345-0 (0.110") and HARTING parts (0.114" to 0.177")?

A: Contact post length determines the depth of solder joint formation and mechanical engagement with the PCB. Variations within 0.004" (0.10mm) are typically within manufacturing tolerance and do not affect electrical performance. Longer post lengths (0.177") may require PCB design verification to ensure adequate clearance on the reverse side of the board. Consult PCB layout specifications and mating connector requirements before substitution.

Q: Can I use 71922-150LF (Amphenol ICC) as a substitute if the contact mating length is 0.228" instead of 0.240"?

A: The 0.012" (0.30mm) difference in contact mating length is within typical manufacturing tolerance for this connector category. Substitution is acceptable provided the mating connector specification does not require the full 0.240" contact engagement depth. Verify mating connector contact socket depth before substitution.

Q: Why do 3M parts have a higher current rating (1.75A) compared to the original 1-499345-0 (1A)?

A: The 3M parts feature enhanced contact material composition and contact finish specifications that support higher current capacity. The higher rating does not affect compatibility with 1A applications; 3M parts are suitable for both 1A and higher current applications up to 1.75A per contact. No design changes are required for 1A applications.

Q: What packaging formats are available for these substitute parts?

A: Available packaging formats include Tray (1-5499345-0, 09185506901, 09185506903, 09185507913, D3433-5302-AR), Bulk (09185506913, 09195506913, N3433-5202RB, N3433-5302RB), and Tube (71922-150LF). Packaging selection affects handling, storage, and supply chain logistics but does not affect connector electrical or mechanical performance.

Q: Are all substitute parts UL94 V-0 rated?

A: Yes. All listed substitute parts maintain UL94 V-0 material flammability rating, matching the original 1-499345-0 specification. This rating is consistent across all manufacturers and series.

Q: Which substitute part should I select for new designs requiring RoHS3 compliance?

A: For new designs, select from the following RoHS3 compliant options: 1-5499345-0 (TE Connectivity, direct equivalent), 09185506901/09185506903/09185506913/09185507913/09195506913 (HARTING SEK series), or D3433-5302-AR (3M D3000 series). All maintain identical connector specifications while meeting RoHS3 requirements.

Q: What is the operating temperature range difference between the original part and HARTING substitutes?

A: The original 1-499345-0 operates from -65°C ~ 105°C. HARTING SEK series parts operate from -55°C ~ 125°C, providing a higher upper temperature limit (+20°C) but a higher lower temperature limit (+10°C). For applications requiring operation below -55°C, the original TE Connectivity part or 3M alternatives (-55°C ~ 105°C) are required.