TE Connectivity AMP Connectors 1473063-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1473063-1 is a 6-position rectangular connector receptacle housing designed for free-hanging, in-line applications. This component is classified as an assembly kit and does not include contacts. The part is currently listed with obsolete product status, necessitating identification of equivalent alternatives for ongoing procurement and system maintenance.

Substiute Parts

1473063-1

TE Connectivity AMP ConnectorsIn Stock: 7241473063-1 Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 1473063-1 rectangular connector receptacle housing requires matching the following critical parameters:

Primary Matching Criteria:

• Connector Type: Receptacle housing
• Contact Type: Female Socket
• Number of Positions: 6
• Number of Rows: 1
• Mounting Type: Free Hanging (In-Line)
• Contact Termination: Crimp
• Category: Rectangular Connectors

Secondary Compliance Criteria:

• Moisture Sensitivity Level: 1 (Unlimited) or equivalent
• REACH Status: REACH Unaffected or compliant
• ECCN Classification: EAR99 or equivalent export control status

Equivalent parts must be sourced from established connector manufacturers within the rectangular connector category and must maintain compatibility with crimp-terminated female socket contacts in a 6-position, single-row configuration.

Parameter Comparison

No substitute parts have been provided in the input data. Equivalent alternatives must be identified through direct manufacturer cross-reference documentation or authorized distributor resources that maintain compatibility matrices for TE Connectivity Dynamic series rectangular connectors.

Engineering Selection Recommendations

The 1473063-1 is designated as obsolete. Component selection for replacement applications must prioritize:

1. Compliance Alignment: Substitute parts must maintain REACH Unaffected or equivalent compliance status to ensure regulatory continuity.

2. Export Control Consistency: Parts classified under EAR99 or equivalent export control designations are acceptable for substitution.

3. Moisture Sensitivity: MSL 1 (Unlimited) rating indicates no moisture sensitivity constraints. Substitute parts with MSL 1 or lower numerical ratings are functionally equivalent.

4. Mechanical Compatibility: The free-hanging, in-line mounting configuration and crimp termination method are critical for system integration. Substitute housings must accommodate identical contact geometry and termination processes.

5. Series Continuity: TE Connectivity Dynamic series connectors or equivalent rectangular connector series from established manufacturers are appropriate substitution sources.

Frequently Asked Questions (FAQ)

Q: What makes a part a valid substitute for the 1473063-1?

A: A valid substitute must be a 6-position, single-row rectangular connector receptacle housing with female socket contacts, crimp termination, and free-hanging in-line mounting. The substitute must maintain equivalent or superior moisture sensitivity ratings and comply with REACH and export control requirements.

Q: Does the 1473063-1 include contacts?

A: No. The 1473063-1 is an assembly kit housing only. Contacts are not included and must be sourced separately. Substitute housings must be compatible with the same contact specifications.

Q: Are there pitch or row spacing specifications for this connector?

A: Pitch and row spacing parameters were not provided in the component documentation. These specifications must be obtained from the manufacturer's detailed technical drawings or datasheet to ensure proper substitute selection.

Q: What is the significance of the MSL 1 rating?

A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity limitations and requires no special handling or storage conditions. Substitute parts with MSL 1 or lower numerical ratings are acceptable.

Q: Can I use a connector from a different manufacturer?

A: Yes, provided the substitute part matches all critical parameters: 6-position receptacle, female socket contacts, crimp termination, single-row configuration, and free-hanging mounting. Compliance certifications must be equivalent or superior.

Q: What should I verify before implementing a substitute part?

A: Confirm mechanical fit with existing mating connectors, verify contact compatibility with the crimp termination process, and validate compliance documentation for REACH and export control status.