TE Connectivity 1469048-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1469048-1 is a 120-position backplane connector header designed for high-speed board edge applications. This connector features male pins and blades with through-hole, right-angle mounting and press-fit termination. The part is classified as obsolete, which necessitates identification of active equivalent components to maintain design continuity and ensure ongoing component availability for production and field service applications.

Substiute Parts

1469048-1

TE Connectivity AMP ConnectorsIn Stock: 8211469048-1 Datasheet

Current PartRFQ

6469048-1

TE Connectivity AMP ConnectorsIn Stock: 19176469048-1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The TE Connectivity 6469048-1 qualifies as a direct substitute for the 1469048-1 based on the following critical parameters:

Matching Electrical and Mechanical Specifications:

• Identical connector type: Header, Male Pins and Blades
• Identical position count: 120 positions
• Identical pitch: 0.098" (2.50mm)
• Identical row and column configuration: 8 rows × 10 columns
• Identical mounting type: Board Edge, Through Hole, Right Angle
• Identical termination method: Press-Fit
• Identical contact layout: 80 Single Signal, 40 Ground
• Identical operating temperature range: -65°C ~ 105°C
• Identical voltage rating: 250V
• Same series designation: Z-PACK HM-Zd

Status Advantage: The substitute part 6469048-1 maintains active product status, ensuring continued availability and manufacturer support, whereas the original 1469048-1 is obsolete.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 6469048-1 is the direct equivalent for the obsolete 1469048-1. Selection of the substitute part is based on the following engineering criteria:

Functional Equivalence: All critical electrical and mechanical parameters are identical between the original and substitute parts. The connector maintains the same 120-position configuration, 0.098" pitch, board edge mounting, and press-fit termination. Signal and ground contact distribution remains unchanged at 80 single signal and 40 ground positions.

Compliance and Certification: Both parts comply with RoHS regulations. The substitute part carries explicit UL94 V-0 material flammability certification and specifies gold contact finish with 30.0µin thickness, providing enhanced reliability documentation. Both parts maintain MSL 1 (Unlimited) moisture sensitivity classification and identical ECCN and HTSUS designations.

Product Status: The substitute part maintains active product status with TE Connectivity, ensuring continued manufacturing support, availability, and technical documentation. The original part is obsolete and subject to discontinuation of supply.

Packaging Consideration: The substitute part is supplied in tube packaging, whereas the original part packaging is not specified. This difference does not affect functional compatibility but may impact handling and storage procedures.

Frequently Asked Questions (FAQ)

Q: Are the 1469048-1 and 6469048-1 electrically interchangeable?

A: Yes. Both connectors share identical electrical specifications including 120 positions, 0.098" pitch, 250V voltage rating, and -65°C to 105°C operating temperature range. The contact layout of 80 single signal and 40 ground positions is identical.

Q: Are the 1469048-1 and 6469048-1 mechanically interchangeable?

A: Yes. Both connectors feature identical mechanical specifications: board edge mounting, through-hole configuration, right-angle orientation, 8 rows × 10 columns arrangement, and press-fit termination. PCB footprints and mounting hole patterns are identical.

Q: What is the primary reason to substitute the 1469048-1 with the 6469048-1?

A: The 1469048-1 is classified as obsolete. The 6469048-1 is an active product that maintains full manufacturing and supply support from TE Connectivity. Substitution ensures long-term component availability and access to current technical documentation.

Q: Does the gold contact finish on the 6469048-1 affect compatibility?

A: No. The gold contact finish on the 6469048-1 is a material enhancement that does not alter electrical or mechanical compatibility. Gold plating improves contact reliability and corrosion resistance compared to unspecified finish on the original part.

Q: Are there any compliance differences between the two parts?

A: Both parts are RoHS compliant and carry identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications. The substitute part provides explicit UL94 V-0 material flammability certification. Both maintain MSL 1 (Unlimited) moisture sensitivity classification.

Q: Does the tube packaging of the 6469048-1 affect its use?

A: Tube packaging is a supply format that does not affect the connector's electrical or mechanical function. Handling and storage procedures may differ from the original part's unspecified packaging, but the connector itself remains identical.

Q: Can the 6469048-1 be used in existing designs specified for the 1469048-1?

A: Yes. The 6469048-1 is a direct substitute with identical electrical and mechanical specifications. No design modifications are required for PCB layout, schematic, or assembly procedures.

Q: What is the current rating of the substitute connector?

A: The 6469048-1 is rated for 0.700A per contact. The original 1469048-1 does not specify a current rating in available documentation.