Phoenix Contact 1460208 Heavy Duty Connector Hood - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1460208 is a heavy duty connector hood designed for side entry applications with PG29 thread size and B24 configuration. This component provides IP65 ingress protection (dust tight, water resistant) and operates across -40°C to 125°C. The part is classified as obsolete, making identification of suitable substitutes essential for ongoing system maintenance and new design implementations where equivalent functionality is required.

Substiute Parts

1460208

Phoenix ContactIn Stock: 10341460208 Datasheet

Current PartRFQ

1412760

Phoenix ContactIn Stock: 10471412760 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1460208 is determined by the following critical parameters:

• Connector Type & Style: Must be hood connector with side entry configuration
• Size Designation: Must be B24 size class
• Thread Size: Must be PG29 thread specification
• Series Compatibility: Must belong to HEAVYCON® B series
• Operating Temperature: Must support -40°C to 125°C range
• Housing Material: Must be aluminum die cast construction
• Ingress Protection: Must meet or exceed IP65 rating

The substitute part 1412760 satisfies all critical substitution criteria. It maintains identical connector type, style, size, thread size, series designation, operating temperature range, and housing material. The substitute provides enhanced ingress protection (IP66/IP67/IP69K) compared to the original specification, representing a functional upgrade while maintaining mechanical and electrical compatibility.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1412760 is the direct substitute for the obsolete 1460208. Both components share identical mechanical and electrical specifications within the HEAVYCON® B series, with matching connector type, size, thread configuration, and operating temperature range.

The 1412760 is currently in active production status, ensuring availability for replacement and new applications. It carries ROHS3 compliance certification, meeting current regulatory requirements. The enhanced ingress protection rating (IP66/IP67/IP69K versus IP65) provides superior environmental sealing without compromising mechanical compatibility or installation procedures.

For applications requiring the original IP65 specification, the 1412760 remains fully compatible as it exceeds the minimum ingress protection requirement. The salt water resistant feature of the substitute provides additional environmental durability in corrosive conditions.

Frequently Asked Questions (FAQ)

Q: Can the 1412760 directly replace the 1460208 in existing installations?

A: Yes. Both components share identical mechanical interfaces, thread sizes (PG29), size designations (B24), and operating temperature ranges (-40°C to 125°C). Installation procedures and mounting requirements are identical.

Q: What is the difference in ingress protection between these parts?

A: The 1460208 provides IP65 protection (dust tight, water resistant). The 1412760 provides IP66/IP67/IP69K protection (dust tight, water resistant, waterproof). The substitute offers enhanced environmental sealing suitable for more demanding applications.

Q: Are there any dimensional differences between these connectors?

A: The width dimension differs slightly: 1460208 is 1.693" (43.00mm), while 1412760 is 1.732" (44.00mm). Length and height dimensions remain identical at 4.724" (120.00mm) and 2.992" (76.00mm) respectively. This minimal difference does not affect standard mounting applications.

Q: What certifications apply to the substitute part?

A: The 1412760 carries ROHS3 compliance and REACH unaffected status, meeting current environmental and regulatory standards. Both parts are classified under ECCN EAR99 and HTSUS 8538.90.8180.

Q: Is the 1412760 available in the same packaging as the original?

A: The 1412760 is supplied in bulk packaging. Packaging specifications should be confirmed with the supplier for specific order requirements.