Phoenix Contact 1460154 Heavy Duty Connector Hood - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1460154 is a heavy duty connector hood for side entry applications, designed for the HEAVYCON® B series. This component features an M25 thread size and B16 connector size with a die-cast aluminum housing. The part is currently classified as obsolete, making equivalent substitute parts necessary for ongoing system maintenance and new installations where this connector type is required.

Substiute Parts

1460154

Phoenix ContactIn Stock: 6761460154 Datasheet

Current PartRFQ

1412649

Phoenix ContactIn Stock: 10441412649 Datasheet

SimilarRFQ

1412717

Phoenix ContactIn Stock: 12031412717 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1460154 is determined by the following critical parameters:

• Connector Type & Style: Must be Hood type with Side Entry configuration
• Size Designation: Must be B16 connector size
• Series Compatibility: Must belong to HEAVYCON® B series
• Housing Material: Must be Aluminum, Die Cast
• Operating Temperature: Must support -40°C ~ 125°C range
• Thread Size: M25 thread is the primary specification; M32 variants represent a different mechanical interface

Two substitute parts meet these criteria with varying levels of feature enhancement:

1460154 → 1412717: Direct functional equivalent with enhanced ingress protection and active product status.

1460154 → 1412649: Alternative with M32 thread size (mechanical variation) and enhanced ingress protection, representing a different mounting interface.

Parameter Comparison

Engineering Selection Recommendations

For M25 Thread Applications: Part 1412717 is the direct substitute for 1460154. Both maintain M25 thread compatibility while 1412717 provides active product status and enhanced ingress protection ratings (IP66/IP67/IP69K). The ROHS3 compliance of 1412717 exceeds the RoHS compliance of the obsolete 1460154.

For M32 Thread Applications: Part 1412649 serves as an alternative where M32 thread mounting is acceptable. This part provides IP66/IP67 ingress protection and active product status with ROHS3 compliance. The mechanical interface differs due to the M32 thread specification.

Compliance Consideration: Both substitute parts carry ROHS3 compliance and REACH Unaffected status, meeting current regulatory requirements for electronic component procurement.

Frequently Asked Questions (FAQ)

Q: Can 1412717 directly replace 1460154 in existing installations? A: Yes. Part 1412717 maintains identical connector type (Hood), style (Side Entry), size (B16), and thread size (M25) specifications. The enhanced ingress protection is a functional improvement without compatibility impact.

Q: What is the difference between 1412717 and 1412649? A: The primary difference is thread size: 1412717 uses M25 (matching 1460154), while 1412649 uses M32. This affects the mechanical mounting interface. Both are HEAVYCON® B series hoods with side entry configuration and B16 size.

Q: Why is 1460154 listed as obsolete? A: Product obsolescence indicates the part is no longer manufactured. Active substitutes 1412717 and 1412649 provide equivalent or enhanced functionality for ongoing applications.

Q: Are the substitute parts compatible with the same housing materials and temperature ranges? A: Yes. All three parts use die-cast aluminum housing and operate across the -40°C ~ 125°C temperature range.

Q: What does the ingress protection rating mean for substitution? A: The enhanced IP ratings (IP66/IP67/IP69K for 1412717 and IP66/IP67 for 1412649) indicate improved sealing against dust and water ingress compared to 1460154. These are functional enhancements that do not prevent substitution.

Q: Which substitute should I select for new designs? A: For M25 thread applications, select 1412717. For M32 thread applications, select 1412649. Both are active products with current compliance certifications.