Phoenix Contact 1460077 Heavy Duty Connector - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1460077 is a hood-style side entry connector from the HEAVYCON® B series, designed for industrial applications requiring IP65 ingress protection. This connector features a B10 size with PG29 thread configuration and operates across a wide temperature range of -40°C to 125°C. The part is currently classified as obsolete, making identification of suitable substitute components essential for ongoing system maintenance and new design implementations.

Substiute Parts

1460077

Phoenix ContactIn Stock: 9521460077 Datasheet

Current PartRFQ

1412595

Phoenix ContactIn Stock: 9321412595 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1460077 is determined by strict alignment with the following core parameters:

• Connector Type & Style: Must be hood-style side entry configuration
• Size Designation: B10 size requirement
• Thread Configuration: PG29 thread size
• Series Compatibility: HEAVYCON® B series
• Operating Temperature Range: -40°C to 125°C minimum
• Housing Material: Aluminum die cast construction
• RoHS Compliance: Required for regulatory alignment

The substitute part 1412595 maintains full compatibility across all mandatory parameters while providing enhanced ingress protection specifications.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1412595 serves as a direct functional substitute for the obsolete 1460077. Both components share identical mechanical and electrical specifications across all critical parameters: connector type, size designation, thread configuration, operating temperature range, and housing material composition.

The primary distinction lies in ingress protection classification. The 1412595 provides IP66/IP67/IP69K protection compared to the IP65 rating of the original part. This represents an enhancement in environmental sealing capability, offering superior dust and water resistance without compromising any existing system requirements.

The active product status of the 1412595 ensures ongoing availability and manufacturer support, addressing the obsolescence constraint of the original component. Both parts maintain identical RoHS compliance and thermal operating parameters, supporting direct substitution in existing designs and new implementations.

Frequently Asked Questions (FAQ)

Q: Can the 1412595 directly replace the 1460077 in existing installations?

A: Yes. Both components share identical connector type, size, thread configuration, and operating temperature specifications. The 1412595 provides enhanced ingress protection without introducing mechanical or electrical incompatibilities.

Q: What is the significance of the IP66/IP67/IP69K rating on the substitute part?

A: The enhanced ingress protection rating indicates superior environmental sealing. IP66 provides dust-tight and high-pressure water jet resistance; IP67 adds temporary immersion capability; IP69K includes steam jet resistance. These enhancements do not compromise compatibility with systems designed for IP65 operation.

Q: Are there dimensional differences between the two parts?

A: Minor dimensional variation exists in the width specification: 1460077 measures 1.693" (43.00mm) while 1412595 measures 1.732" (44.00mm). This 0.039" (1.00mm) difference falls within standard mechanical tolerance ranges for hood connector mounting applications.

Q: Does the substitute part maintain the same locking mechanism?

A: Yes. Both components feature identical locking clip configuration with two clips positioned on the base bottom, ensuring mechanical compatibility with existing mounting hardware.

Q: What is the availability status of each part?

A: The 1460077 is obsolete with 925 units in current inventory. The 1412595 is active with 912 units in stock, providing assured long-term availability for future procurement requirements.