Phoenix Contact 1460048 Heavy Duty Connector Hood - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1460048 is a heavy duty connector hood designed for top entry applications with PG21 thread size in the HEAVYCON® B series. This component provides IP65 ingress protection (dust tight, water resistant) and operates across a temperature range of -40°C to 125°C. The part is currently classified as obsolete, making identification of suitable substitute components essential for ongoing system maintenance and new design implementations where equivalent functionality is required.

Substiute Parts

1460048

Phoenix ContactIn Stock: 10881460048 Datasheet

Current PartRFQ

1412606

Phoenix ContactIn Stock: 11001412606 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Phoenix Contact 1460048 is determined by the following critical parameters that must remain consistent:

• Connector Type & Style: Hood, Top Entry configuration
• Size Designation: B10 form factor
• Thread Interface: PG21 thread size for mechanical compatibility
• Housing Material & Construction: Aluminum die cast for structural equivalence
• Lock Mechanism: Locking clip on base bottom
• Operating Temperature Range: -40°C to 125°C capability
• Series Compatibility: HEAVYCON® B series

The substitute part 1412606 maintains all these core parameters while providing enhanced ingress protection and active product status.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1412606 is the direct substitute for the obsolete 1460048. Both components share identical mechanical interfaces (B10 size, PG21 thread, top entry hood configuration) and thermal operating range (-40°C to 125°C). The 1412606 maintains full HEAVYCON® B series compatibility and equivalent housing construction in aluminum die cast material.

The 1412606 provides enhanced ingress protection (IP66/IP67/IP69K versus IP65) and is classified as an active product with current manufacturing support. Both parts carry equivalent export classification (EAR99) and comply with applicable regulatory standards. The 1412606 is suitable for direct replacement in applications where the original 1460048 was specified.

Frequently Asked Questions (FAQ)

Q: Can the 1412606 directly replace the 1460048 in existing installations?

A: Yes. Both components maintain identical mechanical interfaces (B10 size, PG21 thread, top entry configuration) and equivalent thermal operating range. The 1412606 provides enhanced ingress protection and active product status.

Q: What is the difference in ingress protection between these parts?

A: The 1460048 provides IP65 protection (dust tight, water resistant). The 1412606 provides IP66/IP67/IP69K protection (dust tight, water resistant, waterproof). The enhanced rating in the substitute part does not compromise compatibility and offers improved environmental sealing.

Q: Are there dimensional differences between the two parts?

A: The width dimension differs slightly: 1460048 is 1.693" (43.00mm), while 1412606 is 1.732" (44.00mm). Length and height dimensions remain identical at 2.874" (73.00mm) and 2.835" (72.00mm) respectively. This minimal difference does not affect mechanical mounting or thread interface compatibility.

Q: What is the availability status of each part?

A: The 1460048 is obsolete with 1007 pieces in stock. The 1412606 is an active product with 1090 pieces in stock and ongoing manufacturing support.

Q: Are both parts RoHS compliant?

A: Yes. The 1460048 is ROHS3 compliant. The 1412606 is RoHS compliant. Both meet applicable environmental and material restriction standards.