Phoenix Contact 1460026 Heavy Duty Connector Hood - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1460026 is a Heavy Duty Connector Hood for side entry applications with M20 thread size in the HEAVYCON® B series. This component features a B6 size configuration with aluminum die-cast housing and powder-coated finish, designed for operating temperatures between -40°C and 125°C. The part is currently classified as obsolete, making identification of active equivalent models essential for ongoing procurement and system maintenance. Substitute parts must maintain compatibility across connector type, style, size classification, and core mechanical specifications to ensure proper installation and performance in existing applications.

Substiute Parts

1460026

Phoenix ContactIn Stock: 11051460026 Datasheet

Current PartRFQ

1412562

Phoenix ContactIn Stock: 8611412562 Datasheet

SimilarRFQ

1412570

Phoenix ContactIn Stock: 7331412570 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1460026 is determined by strict alignment with the following parameters:

Primary Compatibility Criteria:

• Connector Type: Hood (required match)
• Style: Side Entry (required match)
• Size Classification: B6 (required match)
• Series: HEAVYCON® B (required match)
• Housing Material: Aluminum, Die Cast (required match)
• Operating Temperature Range: -40°C ~ 125°C (required match)
• Thread Size: M20 (required match for direct substitution)

Secondary Considerations:

• Product Status: Active status preferred for ongoing availability
• RoHS Compliance: Maintained across all substitutes
• Moisture Sensitivity Level: MSL 1 (Unlimited) maintained

Two substitute parts meet these criteria: Phoenix Contact 1412562 and 1412570. Part 1412562 deviates in thread size (M25 instead of M20) and therefore represents a mechanical variant rather than a direct equivalent. Part 1412570 maintains M20 thread size specification and represents the direct active equivalent to the obsolete 1460026.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Recommended): Phoenix Contact 1412570 is the primary substitute for the obsolete 1460026. Both parts maintain identical thread size (M20), connector configuration, and operating temperature specifications. Part 1412570 carries Active product status, ensuring continued availability and supply chain reliability. The upgrade to ROHS3 compliance and addition of IP66/IP69K ingress protection rating represent enhanced environmental performance characteristics. Current inventory of 676 pieces supports immediate procurement requirements.

Mechanical Variant (Conditional): Phoenix Contact 1412562 serves as a substitute only in applications where M25 thread size is mechanically compatible with the installation interface. This part introduces a thread size deviation (M25 versus M20) that requires mechanical accommodation in the mounting structure. The IP66/IP69K ingress protection and salt water resistance features provide enhanced environmental protection compared to the original specification. Selection of 1412562 is appropriate only when M25 threading can be accommodated without system redesign.

Frequently Asked Questions (FAQ)

Q: Can Phoenix Contact 1412570 be used as a direct replacement for 1460026? A: Yes. Part 1412570 maintains identical thread size (M20), connector type (Hood), style (Side Entry), size classification (B6), housing material (Aluminum, Die Cast), and operating temperature range (-40°C ~ 125°C). The part is currently in Active status with 676 units in stock.

Q: What is the primary difference between 1412570 and 1412562? A: The critical difference is thread size. Part 1412570 uses M20 threading (matching the original 1460026), while part 1412562 uses M25 threading. Both maintain B6 size classification and HEAVYCON® B series compatibility. Thread size selection depends on the mechanical mounting interface of your application.

Q: Does the upgrade to ROHS3 compliance affect compatibility? A: No. ROHS3 compliance represents an enhancement to environmental and regulatory standards. Part 1412570 maintains full backward compatibility with systems designed for the RoHS Compliant 1460026.

Q: What does the IP66/IP69K rating on substitute parts mean? A: IP66/IP69K indicates dust-tight and water-resistant performance. The original 1460026 does not specify an ingress protection rating. Substitute parts 1412570 and 1412562 provide enhanced environmental protection suitable for applications requiring dust and water resistance.

Q: Are there packaging differences between the main part and substitutes? A: The original 1460026 is packaged as individual units. Substitute parts 1412562 and 1412570 are supplied in Bulk packaging. Confirm bulk packaging compatibility with your procurement and inventory management procedures.

Q: Can 1412562 be used if my installation requires M25 threading? A: Yes, if your mounting interface is designed for or can accommodate M25 threading. Part 1412562 maintains all other critical specifications (Hood connector, Side Entry style, B6 size, HEAVYCON® B series, Aluminum Die Cast housing, -40°C ~ 125°C operating range). Mechanical compatibility with the M25 thread must be confirmed before selection.