TE Connectivity AMP Connectors 1445101-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1445101-6 is a rectangular connector header designed for surface mount, right-angle applications with 6 positions at 3.00mm pitch. This connector belongs to the Micro MATE-N-LOK series and features shrouded 4-wall construction with male pin contacts and solder termination. The product is currently classified as obsolete, necessitating identification of equivalent substitute components that maintain functional and electrical compatibility for ongoing applications and new designs.

Substiute Parts

1445101-6

TE Connectivity AMP ConnectorsIn Stock: 10171445101-6 Datasheet

Current PartRFQ

0436500605

MolexIn Stock: 14820436500605 Datasheet

SimilarRFQ

0436500609

MolexIn Stock: 32730436500609 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 1445101-6 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Pitch - Mating: 0.118" (3.00mm)
• Number of Positions: 6
• Number of Rows: 1
• Connector Type: Header
• Contact Type: Male Pin
• Style: Board to Cable/Wire
• Shrouding: Shrouded - 4 Wall
• Termination: Solder
• Fastening Type: Locking Ramp
• Contact Shape: Square
• Contact Material: Brass
• Insulation Color: Black
• Features: Board Lock
• Material Flammability Rating: UL94 V-0
• Applications: General Purpose

The identified substitute parts maintain these core electrical and mechanical parameters. Variations in mounting type (surface mount versus through hole), insulation material composition, contact finish specifications, and product status are secondary considerations that do not preclude functional substitution when application requirements permit.

Parameter Comparison

Engineering Selection Recommendations

Molex 0436500609 (Surface Mount, Right Angle)

The Molex 0436500609 represents the closest functional equivalent to the TE Connectivity 1445101-6. Both components share identical mounting type (surface mount, right angle), pitch specification (3.00mm), position count (6), and core connector architecture. The 0436500609 is classified as active product status, ensuring ongoing availability and supply chain continuity. This part is ROHS3 compliant and carries REACH unaffected certification, providing regulatory compliance advantages over the obsolete TE Connectivity part. The primary distinction is the contact finish specification on the mating surface (tin versus gold), which does not preclude electrical compatibility in general purpose applications.

Molex 0436500605 (Through Hole, Right Angle)

The Molex 0436500605 maintains all critical electrical and mechanical parameters but differs in mounting technology (through hole versus surface mount). This part is suitable for applications where PCB design permits through-hole termination. The 0436500605 is also active product status with ROHS3 compliance and REACH unaffected certification. Selection of this part requires confirmation that the application PCB layout accommodates through-hole mounting and that the increased insulation height (0.172" versus 0.152") does not create spatial constraints.

Both Molex alternatives provide superior product lifecycle status compared to the obsolete TE Connectivity 1445101-6 and offer enhanced regulatory compliance through ROHS3 certification.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0436500609 directly replace the TE Connectivity 1445101-6 in existing designs?

A: The Molex 0436500609 maintains identical pitch (3.00mm), position count (6), connector type (header), contact type (male pin), shrouding (4-wall), termination method (solder), and fastening mechanism (locking ramp). Both components feature board lock functionality and UL94 V-0 flammability rating. Direct substitution is supported from an electrical and mechanical standpoint. The contact finish difference (tin mating surface on Molex versus gold on TE Connectivity) does not prevent functional compatibility in general purpose applications.

Q: What is the primary difference between the two Molex substitute parts?

A: The Molex 0436500609 is configured for surface mount, right-angle installation, matching the original TE Connectivity 1445101-6 mounting type. The Molex 0436500605 is configured for through-hole, right-angle installation. Both parts share identical pitch, position count, and core connector specifications. Selection between these two parts depends on PCB design requirements and available mounting technology.

Q: Are there any compliance or regulatory differences between the substitute parts and the original?

A: The TE Connectivity 1445101-6 is classified as obsolete with RoHS status listed as not applicable. Both Molex substitute parts (0436500609 and 0436500605) are active products with ROHS3 compliance and REACH unaffected certification. This provides regulatory advantage and ensures long-term supply availability for new designs or redesigns.

Q: Does the insulation height difference between parts affect compatibility?

A: The TE Connectivity 1445101-6 has an insulation height of 0.152" (3.85mm), while both Molex substitutes have 0.172" (4.37mm). This 0.020" difference must be evaluated against PCB layout constraints and mating connector specifications. If the application accommodates the increased height or if mating connectors are compatible with the taller insulation profile, this difference does not preclude substitution.

Q: What is the significance of the contact finish specifications?

A: The TE Connectivity 1445101-6 features gold mating surface finish with tin-lead post finish. The Molex 0436500609 features tin mating surface finish with tin post finish. The Molex 0436500605 features gold mating surface finish with tin post finish. Contact finish affects corrosion resistance and long-term reliability in specific environmental conditions. For general purpose applications, both tin and gold finishes provide acceptable performance. Applications requiring enhanced corrosion resistance or specific environmental performance should reference detailed contact finish specifications.

Q: Can the through-hole Molex 0436500605 be used in surface mount applications?

A: No. The Molex 0436500605 is designed for through-hole PCB mounting and requires plated through-holes for termination. It is not suitable for surface mount PCB applications. The Molex 0436500609 is the appropriate substitute for surface mount applications.

Q: What inventory status should be considered when selecting a substitute?

A: The TE Connectivity 1445101-6 is listed as obsolete with 990 pieces in stock. The Molex 0436500609 is active product status with 3227 pieces in stock. The Molex 0436500605 is active product status with 1414 pieces in stock. Active product status ensures ongoing manufacturing and supply chain availability, while obsolete status indicates limited remaining inventory and no future production.