TE Connectivity AMP Connectors 1437013-9 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1437013-9 is a 9 Position D-Sub Receptacle connector with female sockets, designed for IDC (Insulation Displacement Contact) termination on ribbon cables. This connector is part of the D-Sub, D-Shaped Connectors category and serves as a standard interface component in electronic assemblies requiring reliable signal transmission through standardized D-Sub form factors.

The primary reason for identifying equivalent and substitute parts is to ensure design flexibility, manage supply chain continuity, and accommodate varying inventory availability across manufacturing and procurement cycles. Substitute parts maintain functional equivalence while potentially offering different packaging, availability, or series designations.

Substiute Parts

1437013-9

TE Connectivity AMP ConnectorsIn Stock: 12091437013-9 Datasheet

Current PartRFQ

1658614-4

TE Connectivity AMP ConnectorsIn Stock: 49081658614-4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity AMP Connectors 1437013-9 is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Parameters:

• Connector Type: Receptacle, Female Sockets
• Number of Positions: 9
• Termination Method: IDC, Ribbon Cable
• Shell Size, Connector Layout: 1 (DE, E)
• Mounting Type: Free Hanging (In-Line)
• Contact Type: Signal
• Flange Feature: Housing/Shell (Unthreaded)

The substitute part 1658614-4 maintains full functional equivalence across all mandatory parameters. Variations in packaging (Tube versus unspecified), series designation (AMPLIMITE HDF-20), and inventory levels do not affect electrical or mechanical compatibility. Both parts are manufactured by TE Connectivity AMP Connectors and are classified within the D-Sub, D-Shaped Connectors category.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity AMP Connectors 1437013-9 and its substitute 1658614-4 are fully compliant with RoHS3 regulations and carry identical electrical and mechanical specifications. The substitute part 1658614-4 is designated as Active product status, confirming ongoing manufacturer support and availability.

Selection between these parts should be based on:

1. Inventory Availability: The substitute part 1658614-4 currently maintains higher inventory levels (4835 Pcs) compared to the main part (1180 Pcs), providing supply chain advantages.

2. Packaging Requirements: The substitute part 1658614-4 is supplied in Tube packaging, which may align with specific procurement or assembly line requirements.

3. Series Designation: The substitute part 1658614-4 belongs to the AMPLIMITE HDF-20 series, which may be relevant for design documentation or future component sourcing.

4. Compliance Certifications: Both parts maintain identical compliance profiles including UL94 V-0 flammability rating, ROHS3 compliance, and EAR99 export classification.

Both parts are suitable for direct substitution in applications requiring 9-position D-Sub receptacle connectors with IDC ribbon cable termination, operating within the -55°C to 105°C temperature range, and handling signal-level currents up to 1.25A.

Frequently Asked Questions (FAQ)

Q: Can 1658614-4 be used as a direct replacement for 1437013-9 in existing designs?

A: Yes. Both connectors maintain identical electrical and mechanical specifications across all critical parameters including connector type, position count, termination method, shell size, mounting configuration, and contact characteristics. Direct substitution is supported without design modification.

Q: Are there differences in contact reliability or performance between these parts?

A: No. Both parts utilize identical contact materials (Phosphor Bronze), contact finish (Gold at 30.0µin thickness), current ratings (1.25A), and operating temperature ranges (-55°C to 105°C). Performance characteristics are equivalent.

Q: What is the significance of the AMPLIMITE HDF-20 series designation on the substitute part?

A: The AMPLIMITE HDF-20 series is a TE Connectivity product line designation. This designation does not affect electrical or mechanical compatibility. It is provided for reference in design documentation and component traceability.

Q: Does the Tube packaging of 1658614-4 affect its compatibility with 1437013-9?

A: No. Packaging format affects logistics and handling but does not impact electrical or mechanical performance. Both parts are functionally identical regardless of packaging method.

Q: Are both parts compliant with current regulatory requirements?

A: Yes. Both the 1437013-9 and 1658614-4 are ROHS3 compliant, carry UL94 V-0 flammability ratings, and are classified as EAR99 for export purposes. Both maintain MSL Level 1 (Unlimited) moisture sensitivity ratings.

Q: What wire gauges are compatible with these connectors?

A: Both connectors accept 26-28 AWG wire in stranded or solid configuration, suitable for standard ribbon cable IDC termination applications.

Q: Can these connectors be used interchangeably in ribbon cable assemblies?

A: Yes. Both connectors are designed for IDC termination on ribbon cables with identical shell sizes (1, DE/E layout) and mounting configurations (Free Hanging, In-Line). They are fully interchangeable in ribbon cable assembly applications.