TE Connectivity 1416200-8 General Purpose Relay SPST-NO 12VDC Equivalent & Substitute Parts

Part Overview

The TE Connectivity Potter & Brumfield Relays model 1416200-8 is a general purpose relay with SPST-NO (Single Pole Single Throw - Normally Open) contact configuration, rated for 8A at 12VDC coil voltage. This relay features through-hole mounting with PC pin termination and is sealed for fully protected operation across industrial temperature ranges.

The 1416200-8 carries an obsolete product status. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this relay specification.

Substiute Parts

1416200-8

TE Connectivity Potter & Brumfield RelaysIn Stock: 10551416200-8 Datasheet

Current PartRFQ

5-1416200-0

TE Connectivity Potter & Brumfield RelaysIn Stock: 11715-1416200-0 Datasheet

SimilarRFQ

V23061A1005A302

TE Connectivity Potter & Brumfield RelaysIn Stock: 4740V23061A1005A302 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 1416200-8 is determined by strict equivalence across the following critical parameters:

Primary Substitution Criteria:

• Coil voltage: 12VDC (exact match required)
• Contact form: SPST-NO (1 Form A) (exact match required)
• Mounting type: Through Hole (exact match required)
• Termination style: PC Pin (exact match required)
• Coil current: 18.4 mA (exact match required)
• Coil resistance: 652 Ohms (exact match required)
• Operating temperature range: -40°C to 85°C (exact match required)
• Must operate voltage: 8.2 VDC (exact match required)
• Must release voltage: 1.2 VDC (exact match required)
• Operate time: 10 ms (exact match required)
• Release time: 5 ms (exact match required)

Secondary Substitution Criteria (Allowable Variation):

• Contact rating (current): 8A minimum (higher ratings acceptable for backward compatibility)
• Switching voltage: 400VAC maximum (equal or higher acceptable)
• Seal rating: Sealed configuration (variations in seal type acceptable)
• Coil insulation class: Class A or higher (Class F acceptable as upgrade)
• Contact material composition (variations acceptable if electrical performance maintained)

Two substitute parts meet these criteria with documented equivalence to the 1416200-8.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: V23061A1005A302

The V23061A1005A302 is the direct functional equivalent to the 1416200-8. This part maintains identical electrical specifications across all critical parameters including coil voltage, contact form, current rating, timing characteristics, and operating temperature range. The V23061A1005A302 carries active product status with ROHS3 compliance and REACH unaffected certification, ensuring long-term supply availability and regulatory alignment. Tube packaging provides standard component handling for production environments. Contact material composition is Silver Tin Oxide (AgSnO), which maintains electrical performance within the specified switching voltage and current parameters.

Secondary Substitute: 5-1416200-0

The 5-1416200-0 provides functional substitution with enhanced contact current rating of 10A compared to the 8A specification of the 1416200-8. This part maintains all other critical electrical parameters including coil voltage, timing characteristics, and operating temperature range. The 5-1416200-0 carries active product status with ROHS3 compliance and REACH unaffected certification. The higher contact rating provides design margin for applications operating near the 8A threshold. Seal rating is specified as Sealed - Flux Protection, and coil insulation is Class F, representing an upgrade from the Class A specification of the main part. Bulk packaging is suitable for high-volume production requirements.

Both substitute parts are manufactured by TE Connectivity Potter & Brumfield Relays, ensuring consistent quality and reliability standards.

Frequently Asked Questions (FAQ)

Q: Can the V23061A1005A302 be used as a direct replacement for the 1416200-8 in existing designs?

A: Yes. The V23061A1005A302 maintains identical electrical specifications across all critical parameters: 12VDC coil voltage, SPST-NO contact form, 8A contact rating, 18.4 mA coil current, 652 Ohms coil resistance, and identical timing characteristics (10 ms operate time, 5 ms release time). Through-hole mounting with PC pin termination is identical. Operating temperature range and voltage thresholds are equivalent.

Q: What is the difference between the 5-1416200-0 and V23061A1005A302 substitutes?

A: The primary difference is contact current rating: 5-1416200-0 is rated for 10A while V23061A1005A302 is rated for 8A. Both maintain identical coil specifications and timing characteristics. The 5-1416200-0 features Class F coil insulation (upgraded from Class A) and Sealed - Flux Protection seal rating. The V23061A1005A302 maintains the original Class A coil insulation and Sealed - Fully seal rating. Contact material differs: 5-1416200-0 uses Silver Nickel (AgNi) while V23061A1005A302 uses Silver Tin Oxide (AgSnO).

Q: Are both substitute parts RoHS compliant?

A: Yes. Both the 5-1416200-0 and V23061A1005A302 carry ROHS3 compliance certification and REACH unaffected status, meeting current environmental and regulatory requirements.

Q: What packaging options are available for the substitute parts?

A: The V23061A1005A302 is supplied in Tube packaging, suitable for standard component handling and production line integration. The 5-1416200-0 is supplied in Bulk packaging, appropriate for high-volume production environments. Packaging selection should align with production workflow and inventory management requirements.

Q: Can the 5-1416200-0 with 10A rating be used in applications designed for the 8A 1416200-8?

A: Yes. The 5-1416200-0 with 10A contact rating is suitable for applications designed for 8A operation. The higher current rating provides design margin and does not affect electrical performance at the lower 8A specification level. All other electrical parameters, including coil voltage, timing, and operating temperature range, are identical to the 1416200-8.

Q: What is the inventory status of the substitute parts?

A: The V23061A1005A302 has 4708 pieces in stock. The 5-1416200-0 has 1086 pieces in stock. Both parts are classified as active products with established supply chains.

Q: Are the substitute parts suitable for sealed or flux-protected applications?

A: The V23061A1005A302 is specified as Sealed - Fully, matching the original 1416200-8 seal rating. The 5-1416200-0 is specified as Sealed - Flux Protection. Both configurations provide sealed operation; the difference reflects the specific sealing methodology. Application requirements should determine which seal rating is appropriate.