Phoenix Contact 1414402 Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1414402 is a modular connector plug designed for Ethernet applications, specifically an IDC RJ45 8-position 8-contact (8p8c) unshielded connector rated for Cat6a performance at 10 Gbps. This component features crimp termination for round cable with solid wires and is constructed from polyamide (PA) nylon housing with phosphor bronze contacts.

The 1414402 is classified as Obsolete and is no longer in active production. Locating equivalent substitute parts is necessary to maintain design continuity, ensure supply chain reliability, and support ongoing system deployments where this connector type is specified.

Substiute Parts

1414402

Phoenix ContactIn Stock: 9661414402 Datasheet

Current PartRFQ

1414395

Phoenix ContactIn Stock: 11701414395 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete Phoenix Contact 1414402 is based on strict equivalence across all critical electrical and mechanical parameters. The substitute part must maintain identical specifications in the following areas:

Electrical Compatibility:

• Connector type: Plug configuration
• Contact count and arrangement: 8p8c (RJ45, Ethernet)
• Performance rating: Cat6a (10 Gbps capability)
• Current and voltage ratings: 1 A at 72 VDC
• Shielding configuration: Unshielded

Mechanical Compatibility:

• Cable type: Round cable with solid wires
• Wire gauge range: 24-27 AWG
• Termination method: Crimp
• Physical length: 0.10' (30.2mm)
• Housing material: Polyamide (PA), Nylon
• Contact material: Phosphor Bronze

Environmental and Compliance:

• Ingress protection: IP20
• Moisture sensitivity level: 1 (Unlimited)
• RoHS compliance status

Parts meeting all these criteria are classified as direct functional equivalents and may be substituted without design modification.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1414402 is obsolete and no longer manufactured. The part 1414395 is the manufacturer-recommended substitute and is currently in active production status.

Substitution Basis:

The 1414395 maintains complete electrical and mechanical equivalence to the 1414402 across all specified parameters. Both connectors are unshielded 8p8c RJ45 plugs rated for Cat6a performance, support crimp termination for 24-27 AWG solid wire, and are constructed from identical materials with matching electrical ratings and environmental protection levels.

Compliance Status:

The 1414402 carries RoHS Compliant certification. The 1414395 carries ROHS3 Compliant certification, representing an updated compliance standard. The 1414395 is also REACH Unaffected, confirming regulatory alignment with current environmental standards.

Availability and Supply Chain:

The 1414395 is actively produced and stocked (1067 units in inventory), ensuring reliable supply for new designs and replacement applications. The 1414402, with 868 units remaining in inventory, is no longer supported for new production.

Physical Differentiation:

The only non-functional difference between the two parts is housing color: the obsolete 1414402 is green, while the active substitute 1414395 is gray. This color difference does not affect electrical performance, mechanical compatibility, or functional operation.

Frequently Asked Questions (FAQ)

Q: Can the 1414395 be used as a direct replacement for the 1414402 in existing designs?

A: Yes. The 1414395 is electrically and mechanically identical to the 1414402 across all functional parameters. Both are unshielded 8p8c RJ45 plugs with Cat6a rating, crimp termination, and identical electrical ratings. No design modification is required.

Q: What is the difference between the 1414402 and 1414395?

A: The primary difference is product status: the 1414402 is obsolete, while the 1414395 is active production. Secondary differences include housing color (green vs. gray), packaging format, and updated RoHS certification level (RoHS vs. ROHS3). All electrical and mechanical specifications are identical.

Q: Are there any compatibility concerns when substituting the 1414395 for the 1414402?

A: No compatibility concerns exist. Both connectors support the same cable types (round cable with solid wires, 24-27 AWG), use identical crimp termination, and maintain the same physical dimensions and contact arrangement. The connectors are functionally interchangeable.

Q: Does the color difference between the two parts affect performance?

A: No. Housing color is a cosmetic attribute and does not affect electrical performance, mechanical function, or environmental protection. Both the green 1414402 and gray 1414395 provide identical IP20 ingress protection and electrical characteristics.

Q: What is the packaging difference between the 1414402 and 1414395?

A: The 1414402 packaging is not specified in available documentation. The 1414395 is supplied in bulk packaging. For specific packaging requirements, consult the manufacturer's current product documentation.

Q: Are both parts RoHS compliant?

A: Yes. The 1414402 is RoHS Compliant. The 1414395 is ROHS3 Compliant, representing a more recent compliance certification. Both parts meet RoHS environmental standards. The 1414395 additionally carries REACH Unaffected status.

Q: What is the current rating and voltage specification for these connectors?

A: Both the 1414402 and 1414395 are rated for 1 A current and 72 VDC voltage. These ratings apply to the connector contacts and are consistent with standard Ethernet modular connector specifications.

Q: Can these connectors be used for applications other than Ethernet?

A: These are modular connectors with 8p8c (RJ45) configuration and Cat6a rating, designed for Ethernet applications. While the physical form factor is standard, use in non-Ethernet applications should be evaluated against the specific electrical and environmental requirements of the intended application.

Q: What wire gauges are compatible with these connectors?

A: Both connectors support wire gauges in the range of 24-27 AWG for round cable with solid wires. This range is standard for Cat6a Ethernet cabling and ensures proper crimp contact and electrical performance.

Q: Is the 1414395 the only substitute for the 1414402?

A: Based on the provided manufacturer data, the 1414395 is the identified substitute. It is the only part listed as equivalent to the obsolete 1414402 and is the manufacturer-recommended replacement.