TE Connectivity 1-413515-1 BNC Connector Jack Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1-413515-1 is a BNC connector jack designed for 50-ohm coaxial RF applications. This female socket connector features right-angle panel mount configuration with through-hole solder termination and bulkhead mounting capability. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain identical electrical and mechanical specifications for direct PCB integration without design modification.

Substiute Parts

1-413515-1

TE Connectivity AMP ConnectorsIn Stock: 9631-413515-1 Datasheet

Current PartRFQ

413515-2

TE Connectivity AMP ConnectorsIn Stock: 1123413515-2 Datasheet

Parametric EquivalentRFQ

413524-2

TE Connectivity AMP ConnectorsIn Stock: 858413524-2 Datasheet

Parametric EquivalentRFQ

414352-1

TE Connectivity AMP ConnectorsIn Stock: 1083414352-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 1-413515-1 is determined by strict equivalence across all electrical and mechanical parameters. The substitute parts maintain identical specifications in the following critical areas:

Electrical Parameters: 50-ohm impedance, 4 GHz maximum frequency, 500 V voltage rating, and -55°C to 85°C operating temperature range.

Mechanical Parameters: BNC jack female socket configuration, right-angle panel mount through-hole solder termination, bulkhead front-side nut mounting feature, bayonet lock fastening, and single-port design.

Material Specifications: Phosphor bronze center contact, zinc body with nickel finish, gold center contact plating, and polymethylpentene dielectric material.

Performance Characteristics: 500 mating cycles, board guide feature, filter capability, and isolated design.

All three substitute parts (413515-2, 413524-2, and 414352-1) satisfy these equivalence criteria and are classified as active products, ensuring continued availability and supply chain reliability.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: TE Connectivity 413515-2

The 413515-2 is the direct parametric equivalent of the obsolete 1-413515-1, sharing the identical base product number 413515. This part is classified as active and provides full electrical and mechanical compatibility. The 413515-2 is suitable for direct replacement in existing PCB designs without layout or schematic modification.

Secondary Recommendation: TE Connectivity 413524-2

The 413524-2 maintains complete parameter equivalence with the main part across all electrical, mechanical, and material specifications. This part is active and available. The 413524-2 differs only in base product number (413524 versus 413515), indicating a variant designation within the TE Connectivity product line while maintaining identical functional performance.

Tertiary Recommendation: TE Connectivity 414352-1

The 414352-1 provides full parametric equivalence and is classified as active. This part is supplied in bulk packaging and shares the same electrical and mechanical characteristics as the main part. The 414352-1 is suitable for applications requiring higher-volume procurement or inventory consolidation.

Compliance Considerations:

The main part 1-413515-1 is RoHS non-compliant. Substitute parts 413515-2 and 413524-2 carry RoHS status as "Not applicable," while 414352-1 is RoHS non-compliant. All parts are classified under ECCN EAR99 and HTSUS 8536.69.4010. REACH status is vendor undefined for all parts. Selection should account for regulatory requirements specific to the end application and target market.

Frequently Asked Questions (FAQ)

Q: Can the 413515-2 be used as a direct replacement for the 1-413515-1 in existing designs?

A: Yes. The 413515-2 is a parametric equivalent with identical electrical specifications (50 ohms, 4 GHz maximum frequency, 500 V rating), mechanical configuration (right-angle panel mount through-hole solder termination), and material composition (phosphor bronze center contact, zinc body with nickel finish, gold plating, PMP dielectric). No PCB layout or schematic changes are required.

Q: What is the difference between the 413515-2 and 413524-2?

A: Both parts are parametric equivalents with identical electrical and mechanical specifications. The difference lies in the base product number designation (413515 versus 413524), which indicates a variant classification within the TE Connectivity product line. Functionally, they are interchangeable.

Q: Why is the 414352-1 listed as a substitute if it has a different base product number?

A: The 414352-1 maintains complete parameter equivalence across all critical specifications: connector style, type, impedance, mounting configuration, termination method, frequency range, voltage rating, operating temperature, mating cycles, and material composition. The different base product number reflects a distinct product variant, but the electrical and mechanical performance is identical. The primary distinction is packaging format (bulk).

Q: Are there any compliance differences between the substitute parts?

A: The main part 1-413515-1 and substitute 414352-1 are both RoHS non-compliant. Substitutes 413515-2 and 413524-2 carry RoHS status as "Not applicable." All parts are classified under the same ECCN (EAR99) and HTSUS code (8536.69.4010). REACH status is vendor undefined for all parts. Compliance selection should be based on end-application regulatory requirements.

Q: What is the inventory status of each substitute part?

A: The 413515-2 has 1,085 pieces in stock, the 413524-2 has 789 pieces in stock, and the 414352-1 has 1,048 pieces in stock. All substitute parts are classified as active products, ensuring continued availability.

Q: Can these parts be used interchangeably in RF applications up to 4 GHz?

A: Yes. All substitute parts maintain the 50-ohm impedance specification and 4 GHz maximum frequency rating required for RF coaxial applications. The identical dielectric material (polymethylpentene), center contact material (phosphor bronze), and plating (gold) ensure consistent RF performance characteristics across all equivalent parts.

Q: What is the significance of the "Board Guide, Filter, Isolated" features?

A: These features are present on all equivalent parts. The board guide ensures proper PCB alignment during assembly. The filter feature provides EMI/RFI suppression. The isolated design prevents ground loop formation. These characteristics are maintained across all substitute parts.

Q: Is the bulkhead mounting feature identical across all parts?

A: Yes. All parts feature bulkhead mounting with front-side nut configuration, enabling secure panel-mount installation. The bayonet lock fastening mechanism is identical across all equivalents, ensuring consistent mating and unmating force characteristics.