Phoenix Contact 1413036 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1413036 is a 2-position feed-through terminal block connector designed for wire gauges 12-28 AWG with screw termination. This component is classified as Last Time Buy, indicating discontinued production status. The CLIPLINE MBK series connector operates at 24 A (IEC) / 20 A (UL) and 500V (IEC) / 600V (UL), with polyamide insulation rated UL94 V-2. Due to its Last Time Buy status, identifying functionally equivalent alternatives is essential for ongoing design support and procurement continuity.

Substiute Parts

1413036

Phoenix ContactIn Stock: 7481413036 Datasheet

Current PartRFQ

3248030

Phoenix ContactIn Stock: 31833248030 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The Phoenix Contact 3248030 qualifies as a substitute for the 1413036 based on the following critical parameters:

Matching Parameters:

• Manufacturer: Phoenix Contact
• Category: Terminal Blocks
• Type: Feed Through
• Number of Positions: 2
• Number of Levels: 1
• Terminal Width: 5.2 mm
• Termination Style: Screw
• Current Rating (IEC): 24 A
• Voltage Rating (IEC): 500 V
• Current Rating (UL): 20 A
• Insulation Material: Polyamide (PA), Nylon
• Color: Gray
• Wire Gauge Range (mm²): 0.2-4 mm²
• RoHS Compliance: Yes (ROHS3 Compliant)

Differing Parameters:

• Wire Gauge Range (AWG): 12-24 AWG (vs. 12-28 AWG on original)
• Voltage Rating (UL): 300 V (vs. 600 V on original)
• Flammability Rating: UL94 V-0 (vs. UL94 V-2 on original)
• Stripping Length: 9 mm (vs. 8 mm on original)
• Series: CLIPLINE UT (vs. CLIPLINE MBK on original)
• Product Status: Active (vs. Last Time Buy on original)

The 3248030 maintains electrical and mechanical compatibility for standard 12-24 AWG applications. The narrower wire gauge range and reduced UL voltage rating must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 3248030 is suitable as a substitute for the 1413036 in applications where the following conditions are met:

Compatibility Criteria:

• Wire gauge requirements do not exceed 24 AWG (the 3248030 does not support 26 AWG or 28 AWG)
• UL voltage rating of 300 V is sufficient for the application (the 3248030 provides lower voltage rating than the original 600 V UL specification)
• The improved flammability rating (UL94 V-0 vs. UL94 V-2) is acceptable or beneficial for the application
• Stripping length tolerance of 9 mm (vs. 8 mm) is compatible with assembly procedures

Procurement Advantage: The 3248030 carries Active product status with significantly higher inventory availability (3079 pcs vs. 715 pcs), ensuring long-term supply continuity and reducing procurement risk associated with the Last Time Buy status of the 1413036.

Compliance Status: Both parts maintain RoHS compliance. The 3248030 is ROHS3 Compliant, representing current regulatory alignment. Both parts are classified as EAR99 for export control purposes.

Frequently Asked Questions (FAQ)

Q: Can the 3248030 accept 26 AWG or 28 AWG wire? A: No. The 3248030 supports wire gauges 12-24 AWG only. The original 1413036 supports 12-28 AWG. Applications requiring 26 AWG or 28 AWG wire cannot use the 3248030 as a direct substitute.

Q: What is the significance of the UL voltage rating difference (600 V vs. 300 V)? A: The 1413036 is rated 600 V under UL standards, while the 3248030 is rated 300 V. Applications operating above 300 V UL must retain the original 1413036 or identify an alternative with matching voltage specifications.

Q: Does the improved flammability rating (UL94 V-0) affect compatibility? A: The UL94 V-0 rating on the 3248030 represents superior flame resistance compared to the UL94 V-2 rating on the 1413036. This is a performance improvement and does not create compatibility issues.

Q: Are the stripping length differences (8 mm vs. 9 mm) significant? A: Stripping length affects wire preparation during assembly. The 1 mm difference must be evaluated against existing assembly procedures and tooling. Verify that assembly equipment can accommodate the 9 mm stripping length of the 3248030.

Q: Why should I consider the 3248030 despite the narrower wire gauge range? A: The 3248030 is in Active product status with higher inventory availability, ensuring long-term supply security. For applications using wire gauges 12-24 AWG, the 3248030 provides equivalent electrical and mechanical performance with improved regulatory alignment (ROHS3 Compliant).

Q: Are both parts from the same manufacturer? A: Yes. Both the 1413036 and 3248030 are manufactured by Phoenix Contact, ensuring design consistency and compatibility with Phoenix Contact system architectures.