Phoenix Contact 1404513 Modular Coupler Connector - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1404513 is a modular coupler connector designed for RJ45 (8p8c) panel mount applications with Cat5e shielded specifications. This component functions as a jack-to-jack adapter, enabling connection between two 8p8c modular connectors in a panel-mounted configuration with IP65 ingress protection.

The 1404513 carries an obsolete product status. Identifying functionally equivalent substitute parts is necessary to maintain system compatibility and ensure continued availability for applications requiring modular coupler connectivity with comparable electrical and mechanical specifications.

Substiute Parts

1404513

Phoenix ContactIn Stock: 9801404513 Datasheet

Current PartRFQ

1425186

Phoenix ContactIn Stock: 10151425186 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1404513 is determined by the following critical parameters:

Mandatory Compatibility Parameters:

• Connector Type: Jack-to-Jack 8p8c (RJ45) coupler configuration
• Mounting Type: Panel Mount
• Ingress Protection: IP65 minimum
• Connector Interface: 8-position 8-contact modular jack

Allowable Variation Parameters:

• Category Rating: Cat5e or higher (Cat6a acceptable for backward compatibility)
• Shielding: Shielded or Unshielded (unshielded acceptable where Cat rating supports application requirements)
• Operating Temperature Range: Equal to or exceeding the original specification
• Contact Material and Finish: Variations permitted if electrical performance is maintained

The substitute part 1425186 meets the mandatory compatibility parameters while introducing variations in category rating (Cat6a vs. Cat5e) and shielding configuration (Unshielded vs. Shielded). These variations represent functional enhancements rather than degradation.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: Phoenix Contact 1425186

The 1425186 is the designated substitute for the obsolete 1404513. Selection is based on the following engineering criteria:

• Product Status Alignment: The 1425186 maintains active product status, ensuring long-term availability and supply chain continuity.
• Compliance Enhancement: The 1425186 carries ROHS3 compliance, representing current regulatory standards compared to the RoHS Compliant designation of the 1404513.
• Functional Compatibility: Both parts maintain identical jack-to-jack 8p8c coupler configuration, panel mount design, and IP65 ingress protection.
• Performance Upgrade: The Cat6a rating of the 1425186 provides backward compatibility with Cat5e applications while supporting higher bandwidth requirements.
• Temperature Range Extension: The -40°C ~ 70°C operating range of the 1425186 exceeds the -25°C ~ 70°C specification of the 1404513, providing broader environmental applicability.

Shielding Consideration: The transition from shielded (1404513) to unshielded (1425186) configuration requires application-level assessment. In environments with minimal electromagnetic interference, the unshielded Cat6a design maintains signal integrity. In high-interference environments, shielded Cat6a alternatives should be evaluated.

Frequently Asked Questions (FAQ)

Q: Can the 1425186 directly replace the 1404513 in existing installations?

A: Yes. Both parts share identical jack-to-jack 8p8c coupler configuration, panel mount design, and IP65 ingress protection. The 1425186 is mechanically and electrically compatible with applications designed for the 1404513.

Q: What is the significance of the Cat6a rating on the 1425186 compared to Cat5e on the 1404513?

A: Cat6a represents a higher category specification with greater bandwidth capacity and improved signal transmission characteristics. Cat6a couplers maintain full backward compatibility with Cat5e installations while supporting applications requiring higher data rates.

Q: Does the unshielded design of the 1425186 affect performance compared to the shielded 1404513?

A: Shielding provides electromagnetic interference (EMI) rejection. In controlled environments with low EMI, unshielded Cat6a designs maintain performance equivalent to shielded Cat5e designs. Applications in high-EMI environments should evaluate shielded alternatives.

Q: What is the difference in operating temperature range between these parts?

A: The 1404513 operates from -25°C to 70°C, while the 1425186 operates from -40°C to 70°C. The extended lower temperature limit of the 1425186 provides applicability in cold environment installations.

Q: Are there packaging differences between the 1404513 and 1425186?

A: The 1404513 is supplied in standard packaging, while the 1425186 is supplied in bulk packaging. Bulk packaging is suitable for high-volume production environments and integration into larger assemblies.

Q: How do the compliance certifications differ between these parts?

A: The 1404513 carries RoHS Compliance certification. The 1425186 carries ROHS3 Compliance and is REACH Affected, representing alignment with current European regulatory requirements for hazardous substance restrictions.