TE Connectivity AMP Connectors 1393642-9 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1393642-9 is a 48-position DIN receptacle connector with female sockets, gold or gold-palladium contact finish, and through-hole termination. This backplane connector operates across the -55°C to 125°C temperature range and is classified as an active product with ROHS3 compliance and UL94 V-0 flammability rating. Substitute parts are identified based on matching electrical and mechanical parameters including connector type, position count, pitch, mounting configuration, and environmental specifications.

Key Parameters

Parameter	Value
Manufacturer Part Number	1393642-9
Manufacturer	TE Connectivity AMP Connectors
Category	Backplane Connectors
Connector Type	Receptacle, Female Sockets
Number of Positions	48
Pitch	0.100" (2.54mm)
Number of Rows	3
Style	C/2 (1/2 C)
Mounting Type	Through Hole
Termination	Wire Wrap
Contact Finish	Gold or Gold-Palladium
Operating Temperature	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
Material - Insulation	Polybutylene Terephthalate (PBT), Polyester, Glass Filled
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Active

Substitute Part Grouping Explanation

Substitute parts for the 1393642-9 are identified based on the following critical parameters that determine functional and mechanical compatibility:

Primary Matching Criteria:

Connector Type: Receptacle, Female Sockets
Number of Positions: 48
Pitch: 0.100" (2.54mm)
Number of Rows: 3
Mounting Type: Through Hole
Operating Temperature Range: -55°C ~ 125°C
Material Flammability Rating: UL94 V-0
Moisture Sensitivity Level: 1 (Unlimited)

Secondary Compatibility Factors:

Style: C/2 (1/2 C) or equivalent DIN 41612 configurations
Contact Finish: Gold or Gold-Palladium
Termination Method: Wire Wrap or Solder
RoHS Compliance Status

Substitutes are grouped into two categories: direct receptacle equivalents with matching electrical and mechanical specifications, and alternative receptacle designs from different manufacturers that maintain the same 48-position, 0.100" pitch, three-row configuration within the specified temperature and compliance parameters.

Parameter Comparison

Part Number	Manufacturer	Connector Type	Positions	Pitch	Rows	Style	Termination	Contact Finish	Operating Temp	Current Rating	RoHS Status
1393642-9	TE Connectivity AMP	Receptacle, Female Sockets	48	0.100" (2.54mm)	3	C/2 (1/2 C)	Wire Wrap	Gold or Gold-Palladium	-55°C ~ 125°C	—	ROHS3 Compliant
09232486824	HARTING	Receptacle, Female Sockets	48	0.100" (2.54mm)	3	2C	Solder	—	—	—	ROHS3 Compliant
86093488314755V1LF	Amphenol ICC (FCI)	Receptacle, Female Sockets	48	0.100" (2.54mm)	3	C/2 (1/2 C)	Solder	Gold	-55°C ~ 125°C	1.5A	RoHS Compliant
86093488314765V1LF	Amphenol ICC (FCI)	Receptacle, Female Sockets	48	0.100" (2.54mm)	3	C/2 (1/2 C)	Solder	Gold	-55°C ~ 125°C	1.5A	RoHS Compliant
86093488314H55V1LF	Amphenol ICC (FCI)	Receptacle, Female Sockets	48	0.100" (2.54mm)	3	C/2 (1/2 C)	Solder	Gold	-55°C ~ 125°C	1.5A	RoHS Compliant
86093488324755V1LF	Amphenol ICC (FCI)	Receptacle, Female Sockets	48	0.100" (2.54mm)	3	C/2 (1/2 C)	Solder	Gold	-55°C ~ 125°C	1.5A	RoHS Compliant
86093488324H55V1LF	Amphenol ICC (FCI)	Receptacle, Female Sockets	48	0.100" (2.54mm)	3	C/2 (1/2 C)	Solder	Gold	-55°C ~ 125°C	1.5A	RoHS Compliant
PCN10-48S-2.54DSA(72)	Hirose Electric Co Ltd	Receptacle, Female Sockets	48	0.100" (2.54mm)	3	C/2 (1/2 C)	Solder	Gold	-55°C ~ 85°C	2A	ROHS3 Compliant
PCN10EA-48S-2.54DSA(72)	Hirose Electric Co Ltd	Receptacle, Female Sockets	48	0.100" (2.54mm)	3	C	Solder	Gold	-55°C ~ 85°C	2A	RoHS Compliant

Engineering Selection Recommendations

Direct Substitutes (Amphenol ICC 8609 Series): The Amphenol ICC (FCI) parts 86093488314755V1LF, 86093488314765V1LF, 86093488314H55V1LF, 86093488324755V1LF, and 86093488324H55V1LF are functionally equivalent receptacles with matching 48-position, 0.100" pitch, three-row C/2 (1/2 C) configuration. All operate within the -55°C to 125°C temperature range and maintain UL94 V-0 flammability compliance. The primary difference is termination method: these parts use solder termination instead of wire wrap. Parts designated with "H55" include board lock features. RoHS compliance status differs between ROHS3 (main part) and RoHS Compliant (substitute parts), with REACH status marked as REACH Affected for Amphenol ICC parts.

Alternative Receptacles (Hirose PCN10 Series): The Hirose Electric PCN10-48S-2.54DSA(72) and PCN10EA-48S-2.54DSA(72) maintain the 48-position, 0.100" pitch, three-row configuration with gold contact finish and solder termination. These parts operate at -55°C to 85°C, providing a narrower upper temperature limit compared to the main part's 125°C maximum. Both are ROHS3 Compliant and MSL 1. The PCN10EA variant includes board lock features and uses style C configuration instead of C/2 (1/2 C).

HARTING Alternative: The HARTING 09232486824 provides a 48-position, 0.100" pitch, three-row receptacle with solder termination and ROHS3 compliance. Operating temperature and contact finish specifications are not provided in available documentation. This part uses DIN 41612 series designation with 2C style configuration.

Selection Basis: All substitute parts maintain active product status and meet the core electrical and mechanical requirements of the 1393642-9. Selection should be based on specific termination requirements (wire wrap versus solder), temperature operating range constraints, and packaging format availability. Parts with board lock features (H55 designation or EA variant) provide additional mechanical retention where required by application design.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC 86093488314755V1LF directly replace the TE Connectivity 1393642-9?

A: The Amphenol ICC 86093488314755V1LF is mechanically and electrically compatible as a receptacle substitute. Both are 48-position, 0.100" pitch, three-row C/2 (1/2 C) connectors with gold contact finish and -55°C to 125°C operating range. The primary difference is termination method: the Amphenol part uses solder termination while the TE part uses wire wrap. PCB design and assembly process must accommodate this termination difference.

Q: What is the difference between the Amphenol ICC parts with "H55" designation and those without?

A: Parts designated with "H55" (86093488314H55V1LF and 86093488324H55V1LF) include board lock features for enhanced mechanical retention. Parts without this designation (86093488314755V1LF and 86093488324755V1LF) provide the same electrical and positional specifications without the locking mechanism. Selection depends on application requirements for connector retention force.

Q: Why do the Hirose PCN10 series parts have a lower maximum operating temperature of 85°C compared to the main part's 125°C?

A: The Hirose PCN10-48S-2.54DSA(72) and PCN10EA-48S-2.54DSA(72) are specified with -55°C to 85°C operating range. Applications requiring operation above 85°C must use the main part or Amphenol ICC alternatives that support -55°C to 125°C range.

Q: What packaging formats are available for these substitute parts?

A: The main TE Connectivity 1393642-9 is supplied in Bulk packaging. Amphenol ICC parts are available in Tray (86093488314755V1LF, 86093488314H55V1LF, 86093488324755V1LF, 86093488324H55V1LF) or Tube (86093488314765V1LF) packaging. Hirose parts are supplied in Tray packaging. HARTING 09232486824 is supplied in Bulk packaging.

Q: Are all substitute parts RoHS compliant?

A: The main part 1393642-9 is ROHS3 Compliant. Amphenol ICC parts are RoHS Compliant (not ROHS3). Hirose PCN10-48S-2.54DSA(72) is ROHS3 Compliant while PCN10EA-48S-2.54DSA(72) is RoHS Compliant. HARTING 09232486824 is ROHS3 Compliant. Verify specific RoHS revision requirements for your application.

Q: What is the current rating difference between the main part and substitutes?

A: The main TE Connectivity 1393642-9 does not specify a current rating. Amphenol ICC substitutes are rated at 1.5A. Hirose PCN10 series parts are rated at 2A. HARTING 09232486824 does not specify a current rating. Applications with defined current requirements should select parts with appropriate current ratings.

Q: Can the HARTING 09232486824 be used as a substitute?

A: The HARTING 09232486824 matches the core specifications: 48-position, 0.100" pitch, three-row receptacle with female sockets, through-hole mounting, and ROHS3 compliance. However, operating temperature range and contact finish specifications are not provided. Confirm these parameters with the manufacturer before substitution.

Q: What is the difference between C/2 (1/2 C) and C style connectors?

A: Both styles maintain the same 48-position, 0.100" pitch, three-row configuration. The style designation refers to the connector profile and mating interface. The PCN10EA-48S-2.54DSA(72) uses full C style while the main part and most substitutes use C/2 (1/2 C) style. Verify mechanical compatibility with mating connectors before substitution.

Q: Is the REACH status important for part selection?

A: REACH status indicates regulatory compliance for chemical substance restrictions. The main part has Vendor Undefined REACH status. Amphenol ICC parts are marked REACH Affected. Hirose PCN10-48S-2.54DSA(72) is REACH Unaffected. Applications subject to REACH regulations should verify compliance requirements with their supply chain and regulatory obligations.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message