TE Connectivity Potter & Brumfield Relay 1393223-8 Equivalent & Substitute Parts

Part Overview

The TE Connectivity Potter & Brumfield Relay 1393223-8 is a general purpose SPDT (Single Pole Double Throw) relay with a 12VDC coil, rated for 8A contact current, and designed for through-hole mounting on printed circuit boards. This relay operates at a maximum switching voltage of 400VAC and features a sealed, fully protected design suitable for industrial and commercial applications.

The 1393223-8 is classified as an obsolete product. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production and maintenance requirements for systems utilizing this relay.

Substiute Parts

1393223-8

TE Connectivity Potter & Brumfield RelaysIn Stock: 8911393223-8 Datasheet

Current PartRFQ

6-1416200-6

TE Connectivity Potter & Brumfield RelaysIn Stock: 9006-1416200-6 Datasheet

SimilarRFQ

V23061B1005A301

TE Connectivity Potter & Brumfield RelaysIn Stock: 11467V23061B1005A301 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 1393223-8 are identified based on strict electrical and mechanical compatibility criteria. The following parameters must match or exceed the main part specifications to qualify as a direct substitute:

Critical Matching Parameters:

• Coil voltage: 12VDC
• Contact form: SPDT (1 Form C)
• Mounting type: Through Hole
• Termination style: PC Pin
• Coil current: 18.4 mA
• Coil resistance: 652 Ohms
• Must operate voltage: 8.2 VDC
• Must release voltage: 1.2 VDC
• Operate time: 10 ms
• Release time: 5 ms
• Operating temperature range: -40°C to 85°C
• Switching voltage: 400VAC maximum

Allowable Variations:

• Contact rating current: Equal to or greater than 8A
• Seal rating: Sealed designs with equivalent or enhanced protection
• Coil insulation class: Class A or higher
• Product status: Active or obsolete

The substitute parts listed below satisfy these criteria and are electrically and mechanically compatible with the 1393223-8 in standard applications.

Parameter Comparison

Engineering Selection Recommendations

Part 6-1416200-6 (V23061-D2005-A801):

This substitute is an active product from the TE Connectivity V23061 AXICOM series. It meets all critical electrical parameters of the 1393223-8 and exceeds the contact current rating at 10A versus the original 8A specification. The part features Class F coil insulation, which provides superior thermal performance compared to the Class A insulation of the original part. The 6-1416200-6 carries ROHS3 compliance and REACH unaffected status, supporting modern regulatory requirements. The sealed flux protection design provides enhanced environmental protection suitable for manufacturing environments with flux residue exposure.

Part V23061B1005A301:

This substitute is an active product from the MSR SCHRACK series, maintaining the same series designation as the original 1393223-8. It provides identical electrical specifications and contact current rating of 8A. The part is packaged in tube format rather than bulk, which may affect procurement and handling procedures. The V23061B1005A301 carries ROHS3 compliance and REACH unaffected status. The contact material differs from the original part, utilizing Silver Tin Oxide (AgSnO) instead of unspecified material in the original specification. This part maintains full compatibility with the original design parameters and operating conditions.

Both substitute parts are manufactured by TE Connectivity Potter & Brumfield Relays, ensuring consistent quality and reliability standards. Selection between these substitutes depends on specific application requirements regarding contact current capacity, packaging format, and environmental exposure conditions.

Frequently Asked Questions (FAQ)

Q: Can the 6-1416200-6 be used as a direct replacement for the 1393223-8 in all applications?

A: The 6-1416200-6 is electrically and mechanically compatible with the 1393223-8 for standard applications. The higher contact current rating of 10A provides additional capacity margin. The Class F coil insulation offers enhanced thermal performance. Verify that the flux protection seal rating is compatible with your specific manufacturing and operating environment.

Q: What is the difference between the two substitute parts?

A: The 6-1416200-6 offers a higher contact current rating of 10A and Class F coil insulation with flux protection sealing. The V23061B1005A301 maintains the original 8A contact current rating and Class A coil insulation with full sealing. Both parts are electrically identical in coil voltage, resistance, timing, and operating temperature range. The choice depends on whether additional current capacity or enhanced thermal performance is required for your application.

Q: Why is the original 1393223-8 classified as obsolete?

A: The 1393223-8 is listed as an obsolete product. The substitute parts 6-1416200-6 and V23061B1005A301 are active products that provide equivalent or enhanced functionality while maintaining current manufacturing and regulatory compliance status.

Q: Are the substitute parts RoHS compliant?

A: Both substitute parts, 6-1416200-6 and V23061B1005A301, are ROHS3 compliant. The original 1393223-8 does not specify RoHS status. This compliance status supports applications requiring adherence to current environmental and regulatory standards.

Q: Does packaging format affect electrical performance?

A: No. The packaging format (bulk versus tube) does not affect electrical performance or specifications. The choice between bulk and tube packaging is determined by procurement, inventory management, and handling requirements specific to your manufacturing process.

Q: Can I use the 6-1416200-6 in applications requiring exactly 8A contact rating?

A: Yes. The 6-1416200-6 is rated for 10A contact current, which exceeds the 8A requirement. The higher rating provides additional safety margin and does not degrade performance in applications requiring 8A or less.

Q: What contact materials are used in these relays?

A: The original 1393223-8 does not specify contact material. The 6-1416200-6 uses Silver Nickel (AgNi) contact material. The V23061B1005A301 uses Silver Tin Oxide (AgSnO) contact material. Both materials are standard for general purpose relays and provide reliable switching performance across the specified voltage and current ranges.

Q: Are there any differences in operating temperature range?

A: No. All three parts operate across the identical temperature range of -40°C to 85°C, ensuring consistent performance across environmental conditions.

Q: What is the significance of the coil insulation class difference?

A: The original 1393223-8 and V23061B1005A301 use Class A coil insulation. The 6-1416200-6 uses Class F coil insulation, which has a higher thermal rating and provides enhanced performance in elevated temperature environments. Both classes are suitable for the specified -40°C to 85°C operating range.