3M 13-6S-W Ring Terminal Connector Equivalent & Substitute Parts

Part Overview

The 3M 13-6S-W is a non-insulated ring terminal connector designed for 10-12 AWG wire gauges with a #6 stud circular configuration. This component is classified as Active product status and is ROHS3 compliant. Ring terminal connectors of this specification are essential in electrical assemblies where reliable, crimped connections to circular studs are required. Substitute parts may be necessary due to inventory availability, supply chain considerations, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

13-6S-W

3MIn Stock: 83813-6S-W Datasheet

Current PartRFQ

P10-6R-L

Panduit CorpIn Stock: 1134P10-6R-L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3M 13-6S-W is determined by strict alignment of the following critical parameters:

• Terminal Type: Must be Circular
• Stud/Tab Size: Must be #6 Stud
• Wire Gauge: Must be 10-12 AWG
• Termination Method: Must be Crimp
• Insulation Type: Must be Non-Insulated
• Contact Material: Must be Copper
• Contact Finish: Must be Tin
• Mounting Type: Must be Free Hanging (In-Line)
• RoHS Compliance: Must be ROHS3 Compliant

The Panduit Corp P10-6R-L meets all critical substitution criteria and is classified as a manufacturer-recommended equivalent. Dimensional variations (thickness, width, and length) remain within acceptable tolerances for this connector category and do not affect functional compatibility in standard applications.

Parameter Comparison

Engineering Selection Recommendations

Both the 3M 13-6S-W and Panduit P10-6R-L are Active status products with ROHS3 compliance and ECCN EAR99 classification. Selection between these parts should be based on:

• Inventory Availability: The 3M 13-6S-W has 819 units in stock; the Panduit P10-6R-L has 1101 units in stock.
• Compliance Requirements: Both parts meet ROHS3 compliance standards. The Panduit part includes REACH Unaffected status.
• Dimensional Fit: The Panduit P10-6R-L has slightly larger outer dimensions (0.310" width vs. 0.280", and 0.780" length vs. 0.680"). Verify mechanical clearance in the target assembly before selection.
• Feature Differences: The Panduit part includes serrated termination in addition to the brazed seam, which may provide enhanced mechanical retention in certain applications.

Frequently Asked Questions (FAQ)

Q: Can the Panduit P10-6R-L be used as a direct replacement for the 3M 13-6S-W?

A: Yes, the Panduit P10-6R-L is a manufacturer-recommended equivalent. Both parts share identical electrical specifications (10-12 AWG wire gauge, #6 stud, crimp termination, copper tin-plated contact). Dimensional differences are minor and do not affect electrical performance. Verify mechanical clearance in your specific assembly design.

Q: What are the key parameters that determine substitution compatibility?

A: Substitution compatibility is determined by: terminal type (circular), stud size (#6), wire gauge (10-12 AWG), termination method (crimp), insulation type (non-insulated), contact material (copper), contact finish (tin), and mounting type (free hanging in-line). All these parameters must match exactly.

Q: Are there any compliance or certification differences between these parts?

A: Both parts are ROHS3 compliant and carry EAR99 ECCN classification. The Panduit P10-6R-L includes REACH Unaffected status. Both have MSL ratings appropriate for their respective product lines.

Q: What is the significance of the serrated termination feature on the Panduit part?

A: The serrated termination on the Panduit P10-6R-L provides additional mechanical grip on the wire during the crimp process. This feature does not affect electrical compatibility but may enhance connection reliability in high-vibration or high-stress applications.

Q: Do dimensional differences affect compatibility?

A: The Panduit P10-6R-L is slightly larger in width (0.310" vs. 0.280") and length (0.780" vs. 0.680") but maintains the same thickness (0.040"). These differences are within acceptable tolerances for this connector category. Verify that your assembly design accommodates the larger dimensions before substitution.