3M 13-6-NB Ring Terminal Connector Equivalent & Substitute Parts

Part Overview

The 3M 13-6-NB is an insulated ring terminal connector designed for 10-12 AWG wire gauges with a #6 stud circular configuration. This component is classified as Active product status and is ROHS3 compliant. Ring terminal connectors of this specification are essential in electrical assemblies where reliable, crimped connections to circular studs are required. Substitute parts may be necessary due to inventory availability, supply chain considerations, or specific application requirements within the allowed electrical and mechanical parameter ranges.

Substiute Parts

13-6-NB

3MIn Stock: 113313-6-NB Datasheet

Current PartRFQ

PNF10-6R-L

Panduit CorpIn Stock: 725PNF10-6R-L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3M 13-6-NB is determined by the following critical parameters:

• Terminal Type: Circular configuration
• Stud/Tab Size: #6 stud
• Wire Gauge: 10-12 AWG
• Termination Method: Crimp
• Insulation Type: Insulated
• Insulation Material: Polyamide (PA), Nylon
• RoHS Compliance: ROHS3 Compliant

The Panduit Corp PNF10-6R-L meets all these core substitution criteria. Both parts share identical wire gauge specifications, stud size, termination method, insulation type, and material composition. Both are ROHS3 compliant and maintain Active product status, ensuring functional and regulatory equivalence within the specified parameter set.

Parameter Comparison

Engineering Selection Recommendations

Both the 3M 13-6-NB and Panduit Corp PNF10-6R-L are Active status products with ROHS3 compliance and EAR99 export classification. Selection between these parts should be based on:

• Inventory availability and lead time requirements
• Specific application mechanical tolerances within the provided dimensional ranges
• Contact material and finish specifications (3M 13-6-NB contact material and finish are not specified; Panduit PNF10-6R-L specifies Copper contact material with Tin finish)
• Series compatibility requirements (3M uses base product number 13-6; Panduit uses Pan-Term® series designation)

Both parts satisfy the core electrical and mechanical substitution criteria for 10-12 AWG ring terminal connectors with #6 stud circular configuration and crimp termination.

Frequently Asked Questions (FAQ)

Q: Can the Panduit PNF10-6R-L directly replace the 3M 13-6-NB in all applications?

A: Both parts meet the critical substitution parameters: #6 stud circular terminal, 10-12 AWG wire gauge, crimp termination, insulated nylon construction, and ROHS3 compliance. Dimensional variations exist within the specified ranges (width and length differ slightly), and contact material specifications differ. Verify application-specific mechanical and electrical requirements before substitution.

Q: What are the key differences between these two parts?

A: The primary differences are: (1) Insulation diameter (3M: 0.250" vs. Panduit: 0.225"), (2) Width outer edges (3M: 0.380" vs. Panduit: 0.370"), (3) Length overall (3M: 1.030" vs. Panduit: 1.060"), (4) Termination feature (3M: Butted Seam vs. Panduit: Serrated Termination), and (5) Contact material specification (Panduit specifies Copper with Tin finish; 3M does not specify).

Q: Are both parts RoHS compliant?

A: Yes, both the 3M 13-6-NB and Panduit PNF10-6R-L are ROHS3 compliant.

Q: What wire gauges are supported by these connectors?

A: Both parts support 10-12 AWG wire gauges.

Q: What is the stud size for these ring terminals?

A: Both parts feature a #6 stud circular configuration.