TE Connectivity Erni 134883 Equivalent & Substitute Parts

Part Overview

The TE Connectivity Erni 134883 is a 120-position backplane connector receptacle with female sockets designed for through-hole mounting. This connector is part of the ERMET ZD series and features a 0.098" (2.50mm) pitch configuration across 10 rows. The product is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing system maintenance, repair, and redesign applications where continued component availability is required.

Substiute Parts

134883

TE Connectivity ErniIn Stock: 1100134883 Datasheet

Current PartRFQ

1469362-1

TE Connectivity AMP ConnectorsIn Stock: 22591469362-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity Erni 134883 is determined by the following critical parameters that must align between the main part and substitute candidates:

Primary Substitution Criteria:

• Connector type: Receptacle with female sockets
• Number of positions: 120
• Pitch specification: 0.098" (2.50mm)
• Mounting method: Through hole
• Termination style: Press-fit
• Contact finish: Gold plating

The substitute part TE Connectivity AMP Connectors 1469362-1 satisfies all primary substitution criteria. This part maintains the same 120-position configuration, identical pitch spacing, through-hole mounting, press-fit termination, and gold contact finish. Both parts are ROHS3 compliant and carry MSL 1 moisture sensitivity ratings, ensuring compatibility in regulated and controlled environments.

The 1469362-1 represents an active product from the Z-PACK HM-Zd series, providing continued availability and supply chain stability compared to the obsolete 134883.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 1469362-1 is the designated substitute for the obsolete TE Connectivity Erni 134883. Both parts maintain identical electrical and mechanical compatibility through matching 120-position configurations, 0.098" (2.50mm) pitch spacing, through-hole mounting, and press-fit termination methods.

Selection of the 1469362-1 is supported by:

Compliance Alignment: Both parts carry ROHS3 compliance certification and MSL 1 moisture sensitivity ratings, ensuring regulatory and environmental compatibility in applications requiring these certifications.

Supply Chain Continuity: The 1469362-1 maintains active product status with documented inventory availability (2200 pieces), providing reliable sourcing compared to the obsolete 134883.

Mechanical Compatibility: Identical pitch and mounting specifications ensure direct PCB layout compatibility without redesign requirements.

Electrical Specifications: Both parts feature gold contact finish and support the same press-fit termination methodology, maintaining signal integrity and connection reliability.

The 1469362-1 operates within a temperature range of -65°C to 105°C, which encompasses the lower bound of the 134883 specification (-55°C to 125°C) but does not extend to the upper temperature limit. Applications requiring operation above 105°C require evaluation of alternative solutions.

Frequently Asked Questions (FAQ)

Q: Can the 1469362-1 directly replace the 134883 in existing PCB designs?

A: The 1469362-1 maintains identical pitch (0.098" / 2.50mm), 120-position count, through-hole mounting, and press-fit termination specifications. PCB footprints designed for the 134883 are compatible with the 1469362-1 without modification. However, the row configuration differs (10 rows vs. 8 rows), which may affect physical board layout. Verify mechanical clearance and contact layout alignment before implementation.

Q: What is the difference in row configuration between these parts?

A: The 134883 features 10 rows of 12 positions each, while the 1469362-1 features 8 rows of 15 positions each (with 80 single signal contacts and 40 ground contacts). Both configurations deliver 120 total positions with identical 0.098" pitch spacing. The different row arrangement may require evaluation of mechanical fit within the application enclosure.

Q: Are both parts RoHS compliant?

A: Yes. Both the 134883 and 1469362-1 carry ROHS3 compliance certification, meeting regulatory requirements for restricted substance elimination in electronic components.

Q: What is the operating temperature difference between these parts?

A: The 134883 operates from -55°C to 125°C, while the 1469362-1 operates from -65°C to 105°C. The 1469362-1 provides lower temperature capability but does not extend to the upper temperature limit of the 134883. Applications requiring sustained operation above 105°C require alternative component evaluation.

Q: Are moisture sensitivity levels equivalent?

A: Yes. Both parts carry MSL 1 (Unlimited) moisture sensitivity ratings, indicating no moisture-related storage or handling restrictions. Both parts are suitable for standard warehouse and manufacturing environments without special desiccant packaging or humidity control requirements.

Q: What is the contact finish specification for both parts?

A: Both the 134883 and 1469362-1 feature gold contact finish. The 1469362-1 specifies a contact finish thickness of 30.0µin (0.76µm). The 134883 does not provide contact finish thickness documentation.

Q: Is the 1469362-1 available in the same packaging as the 134883?

A: The 1469362-1 is supplied in tray packaging. The 134883 packaging specification is not documented in the provided data. Verify packaging requirements for your procurement and assembly processes.