TE Connectivity AMP Connectors 1339447-7 D-Sub Receptacle Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1339447-7 is a 50 position receptacle connector featuring right angle through hole solder termination within the CHAMP .085 series. This connector is classified as obsolete, indicating discontinuation from active manufacturing. The outer shroud contact design with board lock, latch lock, and shielded features provides mechanical stability and electromagnetic protection for D-Sub applications.

Identification of equivalent and substitute parts is necessary due to the obsolete product status. Active production alternatives meeting identical electrical and mechanical specifications ensure continued availability for new designs, repairs, and production continuity.

Substiute Parts

1339447-7

TE Connectivity AMP ConnectorsIn Stock: 12161339447-7 Datasheet

Current PartRFQ

6339447-7

TE Connectivity AMP ConnectorsIn Stock: 10406339447-7 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 1339447-7 with the active production part 6339447-7 is based on strict equivalence across all critical electrical and mechanical parameters. Both parts maintain identical specifications for:

• Connector type, position count, and row configuration
• Through hole right angle mounting orientation
• Solder termination method
• Outer shroud contact style within the CHAMP .085 series
• Housing/shell flange with 4-40 fastening
• Gold contact finish at 30.0µin thickness
• Shielded configuration for electromagnetic protection
• Moisture sensitivity level 1 rating

The primary distinction between these parts is product status and regulatory compliance. The substitute part 6339447-7 is actively manufactured and RoHS3 compliant, whereas the main part 1339447-7 is obsolete and RoHS non-compliant. Both parts carry identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Parameter Comparison

Engineering Selection Recommendations

The substitute part 6339447-7 is the direct equivalent for the obsolete 1339447-7 across all electrical and mechanical parameters. Selection of the substitute part is supported by the following factors:

Product Status: The substitute part maintains active production status, ensuring long-term availability and supply chain continuity. The main part is obsolete and no longer manufactured.

Regulatory Compliance: The substitute part 6339447-7 is RoHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for new designs and production. The main part is RoHS non-compliant and REACH affected, presenting compliance limitations for applications subject to these regulations.

Functional Equivalence: Both parts are identical in connector configuration, position count, mounting orientation, termination method, and contact specifications. The substitute part maintains the same gold contact finish thickness and shielded design.

Feature Consideration: The substitute part omits the latch lock feature present in the main part. This represents a functional difference that requires evaluation based on specific application requirements for mechanical retention.

For applications where the latch lock feature is not critical to system design, the substitute part 6339447-7 provides full electrical and mechanical compatibility with improved regulatory compliance and active manufacturing support.

Frequently Asked Questions (FAQ)

Q: Are the 1339447-7 and 6339447-7 electrically identical?

A: Yes. Both parts are 50 position receptacle connectors with identical pin configurations, gold contact finish at 30.0µin thickness, and shielded design. Electrical performance and signal integrity characteristics are equivalent.

Q: What is the mechanical difference between these parts?

A: The substitute part 6339447-7 does not include the latch lock feature present in the main part 1339447-7. Both parts retain board lock and shielded features. The latch lock absence may affect mechanical retention in applications requiring positive locking mechanisms.

Q: Can the 6339447-7 be used as a direct replacement in existing designs?

A: The 6339447-7 is mechanically and electrically compatible for through hole right angle solder applications. Designs relying on the latch lock feature require evaluation to determine if the board lock feature alone provides sufficient mechanical retention.

Q: What is the packaging difference?

A: The main part 1339447-7 packaging is not specified in available documentation. The substitute part 6339447-7 is supplied in tray packaging. Verify packaging requirements for your procurement and assembly processes.

Q: Why is the main part obsolete?

A: The 1339447-7 is classified as obsolete by TE Connectivity AMP Connectors. The substitute part 6339447-7 represents the active production equivalent within the CHAMP .085 series.

Q: Are there regulatory compliance differences?

A: Yes. The substitute part 6339447-7 is RoHS3 compliant and REACH unaffected. The main part 1339447-7 is RoHS non-compliant and REACH affected. For applications subject to RoHS or REACH regulations, the substitute part is required.

Q: What is the moisture sensitivity level for both parts?

A: Both parts carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or assembly processes.

Q: Are the ECCN and HTSUS classifications identical?

A: Yes. Both parts share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications for export control and tariff purposes.