LAPP 13162300 Equivalent & Substitute Parts

Part Overview

The LAPP 13162300 is an active heavy-duty connector contact designed for industrial applications. This machined crimp pin operates at 16 AWG wire gauge with silver plating and is part of the EPIC® series. The component is ROHS3 compliant and carries unlimited moisture sensitivity rating, making it suitable for demanding environments. Equivalent parts are identified when they share identical electrical and mechanical specifications, enabling direct substitution in connector assemblies where pin compatibility is required.

Substiute Parts

13162300

LAPPIn Stock: 103913162300 Datasheet

Current PartRFQ

09150006101

HARTINGIn Stock: 191109150006101 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 13162300 is determined by matching the following critical parameters:

• Contact Type: Machined crimp pin
• Termination Method: Crimp
• Wire Gauge: 16 AWG
• Contact Material Finish: Silver
• Pin Configuration: Pin (not socket)
• Compliance Standards: ROHS3 Compliant, REACH Unaffected
• Regulatory Classification: EAR99, HTSUS 8536.90.4000

The HARTING 09150006101 meets all substitution criteria, sharing identical electrical and mechanical specifications with the main part across all defined parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the LAPP 13162300 and HARTING 09150006101 are active products with identical compliance certifications. Selection between these parts should be based on availability, lead time, and procurement requirements. Both components satisfy ROHS3 and REACH regulatory requirements and carry the same MSL rating for moisture-sensitive applications. The HARTING part includes specified contact finish thickness of 118.1µin (3.00µm), providing additional documentation for applications requiring plating thickness verification.

Frequently Asked Questions (FAQ)

Q: Can HARTING 09150006101 directly replace LAPP 13162300 in existing assemblies?

A: Yes. Both parts are machined crimp pins with 16 AWG wire gauge and silver contact finish. They share identical termination method, compliance status, and regulatory classifications, enabling direct substitution in heavy-duty connector applications.

Q: Are there any differences in contact finish specifications?

A: The HARTING part specifies contact finish thickness at 118.1µin (3.00µm). The LAPP part does not provide thickness documentation in available data. Both use silver finish material.

Q: What determines if a part can substitute for the LAPP 13162300?

A: Substitute parts must match wire gauge (16 AWG), contact termination method (crimp), pin configuration (pin, not socket), contact finish (silver), and compliance standards (ROHS3, REACH Unaffected). Machined type construction is also required.

Q: Are both parts suitable for moisture-sensitive applications?

A: Yes. Both components carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: What is the regulatory classification for these parts?

A: Both parts are classified as EAR99 under export control and HTSUS 8536.90.4000 for tariff purposes, with ROHS3 compliance and REACH unaffected status.