LAPP 13162200 Equivalent & Substitute Parts

Part Overview

The LAPP 13162200 is an active heavy-duty connector contact designed as a crimp pin for 18 AWG wire applications. This machined pin contact features silver plating and is part of the EPIC® series connector system. The component is ROHS3 compliant and carries unlimited moisture sensitivity rating, making it suitable for industrial and harsh environment applications.

Equivalent and substitute parts are identified when they maintain identical or functionally equivalent electrical and mechanical specifications, allowing direct replacement within the same connector system or compatible alternatives.

Substiute Parts

13162200

LAPPIn Stock: 94913162200 Datasheet

Current PartRFQ

09150006102

HARTINGIn Stock: 1257709150006102 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 13162200 is determined by the following critical parameters:

• Wire Gauge: 18 AWG (electrical compatibility with mating connectors)
• Contact Termination: Crimp (mechanical attachment method)
• Pin or Socket: Pin (contact gender)
• Contact Finish: Silver (electrical and corrosion resistance properties)
• Type: Machined (manufacturing process and dimensional consistency)
• Product Status: Active (current availability and support)
• Compliance: ROHS3 and REACH status (regulatory requirements)

The HARTING 09150006102 contact meets all these critical parameters, establishing it as a direct functional equivalent despite belonging to a different connector series (Han® D versus EPIC®).

Parameter Comparison

Engineering Selection Recommendations

Both the LAPP 13162200 and HARTING 09150006102 are active products with identical compliance certifications (ROHS3 and REACH Unaffected). Selection between these contacts should be based on connector system compatibility:

• Use LAPP 13162200 for EPIC® series connector applications
• Use HARTING 09150006102 for Han® D series connector applications

Both contacts are suitable for 18 AWG wire termination with crimp attachment and deliver equivalent electrical performance through silver contact finish and machined construction. Regulatory compliance is equivalent across both options.

Frequently Asked Questions (FAQ)

Q: Can HARTING 09150006102 be used as a direct replacement for LAPP 13162200?

A: The contacts are electrically and mechanically equivalent in terms of wire gauge, termination method, and contact finish. However, they belong to different connector series (Han® D versus EPIC®). Compatibility depends on whether the mating connector housing accepts the substitute contact's physical dimensions and insertion method. Verify connector housing compatibility before substitution.

Q: What determines if these contacts are substitutable?

A: Substitution is valid when wire gauge (18 AWG), contact termination (crimp), pin/socket configuration (pin), contact finish (silver), and product type (machined) are identical. Both contacts meet these criteria.

Q: Are there compliance differences between these parts?

A: No. Both contacts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited) rating. Regulatory status is equivalent.

Q: Does contact finish thickness affect substitution?

A: The HARTING contact specifies 118.1µin (3.00µm) silver plating thickness, while the LAPP specification does not provide this detail. Both meet heavy-duty connector standards for silver-plated contacts. Thickness differences within industry standards do not affect functional substitution.

Q: What is the inventory status for these parts?

A: LAPP 13162200 has 895 pieces in stock. HARTING 09150006102 has 12,478 pieces in stock. Both are available as new original components in bulk packaging.