TE Connectivity AMP Connectors 1310852-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1310852-1 is an SMB Connector Jack with male pin configuration, designed for 50 Ohm coaxial RF applications. This through-hole, right-angle solder connector operates at frequencies up to 4 GHz and is rated for 335 V with an insertion loss of 0.6 dB. The connector is RoHS Compliant and REACH Affected, with an active product status. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory requirements necessitate alternative manufacturers.

Substiute Parts

1310852-1

TE Connectivity AMP ConnectorsIn Stock: 10801310852-1 Datasheet

Current PartRFQ

142146

Amphenol RFIn Stock: 2334142146 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 1310852-1 are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must match identically:

• Connector Style: SMB
• Connector Type: Jack, Male Pin
• Impedance: 50 Ohms
• Mounting Type: Through Hole, Right Angle
• Contact Termination: Solder
• Shield Termination: Solder
• Frequency - Max: 4 GHz
• Voltage Rating: 335 V
• Operating Temperature: -65°C ~ 165°C
• Insertion Loss: 0.6 dB
• Mating Cycles: 500
• Number of Ports: 1
• Fastening Type: Snap-On

The Amphenol RF 142146 meets all these parameters and is classified as a parametric equivalent. Both parts share identical electrical performance characteristics and mechanical compatibility for PCB-level RF applications.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 1310852-1 and Amphenol RF 142146 are active products with full regulatory compliance. The TE Connectivity part carries RoHS Compliant certification, while the Amphenol RF substitute carries ROHS3 Compliant certification, representing an equivalent or enhanced compliance level. Both parts are REACH Affected and classified under ECCN EAR99.

Selection between these parts should be based on:

• Availability and inventory requirements
• Packaging format preference (TE Connectivity supplied in Bulk; Amphenol RF supplied in Bag)
• Supply chain and procurement lead times
• Manufacturer qualification requirements within your organization

Both parts are electrically and mechanically interchangeable for 50 Ohm SMB jack applications requiring through-hole, right-angle solder termination with 4 GHz frequency capability.

Frequently Asked Questions (FAQ)

Q: Are the TE Connectivity 1310852-1 and Amphenol RF 142146 electrically interchangeable?

A: Yes. Both parts are parametric equivalents with identical electrical specifications: 50 Ohm impedance, 4 GHz maximum frequency, 335 V voltage rating, 0.6 dB insertion loss, and 500 mating cycles.

Q: What are the mechanical compatibility requirements?

A: Both connectors use identical mounting specifications: SMB jack with male pin, through-hole right-angle solder termination, snap-on fastening, and single-port configuration. They are mechanically compatible for PCB-level RF applications.

Q: Do the packaging differences affect component selection?

A: The TE Connectivity 1310852-1 is supplied in Bulk packaging, while the Amphenol RF 142146 is supplied in Bag packaging. Packaging format does not affect electrical or mechanical performance and should be selected based on procurement and inventory management requirements.

Q: Are both parts RoHS compliant?

A: Yes. The TE Connectivity 1310852-1 is RoHS Compliant, and the Amphenol RF 142146 is ROHS3 Compliant. Both meet RoHS requirements for lead-free and restricted substance compliance.

Q: What is the operating temperature range for both parts?

A: Both parts operate across the identical temperature range of -65°C to 165°C, suitable for industrial and commercial RF applications.

Q: Can these connectors be used interchangeably in existing designs?

A: Yes. The identical parametric specifications, material composition (brass body with gold finish, PTFE dielectric), and mechanical mounting characteristics allow direct substitution in PCB designs without modification.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts have Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control requirements.