Switchcraft 13036 Toggle Switch - Equivalent & Substitute Parts

Part Overview

The Switchcraft 13036 is a 2-position toggle switch from the 13000 series, featuring a standard round actuator, non-illuminated design, and solder lug termination. This component is classified as obsolete, with 1,103 units currently in stock. Due to its obsolete status, identifying active equivalent parts is essential for ongoing system maintenance and new design implementations where functional compatibility is required.

Substiute Parts

13036

Switchcraft Inc.In Stock: 114113036 Datasheet

Current PartRFQ

13036X

Switchcraft Inc.In Stock: 77613036X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Switchcraft 13036 is determined by the following parameters:

• Functional equivalence: 2-position toggle switch configuration
• Mechanical compatibility: Standard round actuator, 15/32-32 bushing thread, solder lug termination
• Physical form factor: Thermoplastic actuator material
• Series alignment: 13000 series designation
• Electrical interface: Non-illuminated design with matching termination style

The substitute part must maintain identical mechanical mounting dimensions, actuator engagement characteristics, and electrical connection methodology to ensure direct replacement capability without circuit board or panel modifications.

Parameter Comparison

Engineering Selection Recommendations

The Switchcraft 13036X qualifies as a direct substitute for the 13036 based on functional and mechanical parameter alignment within the 13000 series. The primary distinction is product status: the 13036 is obsolete while the 13036X is active, ensuring continued availability and supply chain reliability.

The 13036X provides ROHS3 compliance, addressing regulatory requirements for new designs and systems subject to RoHS directives. Both parts maintain identical mechanical interfaces and electrical connection methodology, supporting direct replacement without design modification.

Selection between these parts should be based on regulatory compliance requirements and supply chain availability. The 13036X is the recommended choice for new implementations and ongoing procurement due to its active status and enhanced compliance profile.

Frequently Asked Questions (FAQ)

Q: Can the 13036X directly replace the 13036 without circuit board modifications?

A: Yes. Both parts share identical mechanical mounting dimensions (15/32-32 bushing thread), actuator type (standard round), and termination style (solder lug). Direct substitution is supported without circuit board or panel alterations.

Q: What is the primary difference between these two parts?

A: The 13036X is the active production variant with ROHS3 compliance, while the 13036 is obsolete and RoHS non-compliant. Functionally and mechanically, both parts are equivalent 2-position toggle switches within the 13000 series.

Q: Are there any electrical performance differences between the 13036 and 13036X?

A: No electrical parameters are specified in the technical data for either part. Both are functionally identical 2-position toggle switches with non-illuminated, solder lug termination.

Q: Which part should be selected for new designs?

A: The 13036X should be selected for new designs due to its active product status, ROHS3 compliance, and guaranteed supply chain availability.

Q: Are both parts subject to the same export classifications?

A: Yes. Both parts carry the same ECCN (EAR99) and HTSUS code (8536.50.9065), indicating identical export and tariff classifications.