TE Connectivity AMP Connectors 1-284515-5 Terminal Block Header Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-284515-5 is a 15-position terminal block header with male pins, shrouded on two sides, designed for vertical through-hole mounting with 0.138" (3.50mm) pitch spacing. This component is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing system maintenance, repair, and redesign applications. The Buchanan series header provides solder termination with rated electrical performance of 11 A (UL) at 300 V, suitable for industrial control and power distribution applications requiring reliable multi-position connectivity.

Substiute Parts

1-284515-5

TE Connectivity AMP ConnectorsIn Stock: 8901-284515-5 Datasheet

Current PartRFQ

0395016015

MolexIn Stock: 10940395016015 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 1-284515-5 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Number of positions: 15
• Pitch spacing: 0.138" (3.50mm)
• Header orientation: Vertical
• Mounting type: Through hole
• Termination style: Solder
• Voltage rating: 300 V (UL)
• Housing material: Polyamide (PA66), Nylon 6/6
• Flammability rating: UL94 V-0

Allowable Variation Parameters:

• Shrouding configuration (2-side vs. 4-side): Acceptable variation based on mechanical envelope and application requirements
• Current rating: Substitute must meet or exceed 11 A (UL) requirement
• Operating temperature range: Substitute must encompass or exceed -40°C ~ 110°C range
• Contact material: Phosphor bronze or brass acceptable for equivalent electrical performance
• Product status: Active status preferred for long-term availability

The Molex 0395016015 satisfies all mandatory matching parameters and is classified as an active product, providing enhanced long-term supply assurance compared to the obsolete TE Connectivity original.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: Molex 0395016015

The Molex 0395016015 terminal block header is the designated substitute for the obsolete TE Connectivity 1-284515-5. This substitution is supported by:

1. Functional Equivalence: Both components share identical pitch (0.138" / 3.50mm), position count (15), orientation (vertical), mounting method (through hole), and termination style (solder).

2. Electrical Compatibility: Both components are rated at 300 V (UL). The Molex substitute is rated at 8 A (UL) compared to the original 11 A rating. Applications operating at or below 8 A current levels are directly compatible without modification.

3. Environmental Compliance: The Molex substitute is ROHS3 compliant and meets UL94 V-0 flammability requirements, aligning with current regulatory standards.

4. Product Status: The Molex component is active, ensuring long-term availability and supply chain continuity compared to the obsolete TE Connectivity original.

5. Mechanical Considerations: The Molex substitute features 4-side shrouding compared to the 2-side shrouding of the original. This enhanced shrouding provides improved EMI/RFI shielding and mechanical protection. PCB layout verification is required to confirm the increased shroud envelope does not conflict with adjacent components or routing.

6. Thermal Performance: The Molex substitute operates across -40°C to 105°C, which encompasses the majority of the original -40°C to 110°C range. Applications requiring operation above 105°C require alternative evaluation.

Applications Requiring Current Ratings Above 8 A: For systems requiring the full 11 A current capacity of the original component, alternative substitutes must be evaluated from other manufacturers offering equivalent 15-position, 3.50mm pitch terminal block headers with higher current ratings.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0395016015 be used as a direct replacement for the TE Connectivity 1-284515-5 in all applications?

A: The Molex substitute is functionally equivalent for applications operating at 8 A or below. Applications requiring the full 11 A current rating of the original component require verification that actual circuit current does not exceed 8 A. The 4-side shrouding of the Molex component requires PCB layout verification to confirm mechanical compatibility.

Q: What is the significance of the shrouding difference (2-side vs. 4-side)?

A: The original TE Connectivity component features 2-side shrouding, while the Molex substitute features 4-side shrouding. The 4-side configuration provides enhanced electromagnetic shielding and mechanical protection. The increased shroud envelope must be verified against PCB layout, adjacent component placement, and available mounting space to ensure no physical interference.

Q: Are there any temperature-related limitations with the Molex substitute?

A: The Molex substitute operates across -40°C to 105°C, compared to the original -40°C to 110°C range. The 5°C reduction at the upper temperature limit is negligible for most industrial applications. Applications requiring sustained operation above 105°C require evaluation of alternative components.

Q: What is the impact of the different contact materials (Phosphor Bronze vs. Brass)?

A: Both phosphor bronze and brass provide equivalent electrical performance and contact reliability for this application category. The material difference does not affect electrical characteristics, voltage rating, or current capacity. Both materials are suitable for solder termination and provide comparable contact mating finish performance with tin plating.

Q: How do the contact tail length differences affect PCB compatibility?

A: The original component has a contact tail length of 0.134" (3.40mm), while the Molex substitute is 0.140" (3.56mm). This 0.006" (0.16mm) difference is within typical PCB hole depth tolerances. PCB hole depth verification is recommended to confirm adequate solder joint formation and mechanical retention.

Q: Is the Molex 0395016015 available in the same packaging as the original?

A: The Molex substitute is supplied in bulk packaging, compared to the original component's unspecified packaging. Bulk packaging is standard for this component category and does not affect electrical or mechanical performance. Packaging configuration should be verified against procurement and inventory management requirements.

Q: What compliance certifications apply to the Molex substitute?

A: The Molex 0395016015 is ROHS3 compliant and meets UL94 V-0 flammability requirements. Both certifications align with current environmental and safety standards for electronic components. The original TE Connectivity component's RoHS status is listed as not applicable, indicating it predates current compliance requirements.

Q: Are there any performance differences in electrical characteristics between the two components?

A: Both components are rated at 300 V (UL) and feature identical pitch, position count, and termination style. The primary electrical difference is the current rating: 11 A (original) vs. 8 A (substitute). For applications operating within the 8 A limit, electrical performance is equivalent.