TE Connectivity AMP Connectors 1-284514-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-284514-6 is a 16 Position Terminal Block Header with male pins, shrouded on four sides, designed for vertical through-hole mounting with 0.138" (3.50mm) pitch spacing. This component is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing system maintenance, repair, and redesign applications.

Terminal block headers of this configuration are used in industrial control systems, power distribution modules, and signal routing applications where reliable solder-terminated connections are required. The obsolete status necessitates evaluation of active alternative components that maintain functional and electrical compatibility.

Key Parameters

Parameter	Value
Number of Positions	16
Pitch (Center-to-Center Spacing)	0.138" (3.50mm)
Header Orientation	Vertical
Mounting Type	Through Hole
Termination Style	Solder
Pin Configuration	Male Pins, Shrouded (4 Side)
Voltage Rating (UL)	300 V
Current Rating (UL)	11 A
Operating Temperature Range	-40°C ~ 110°C
Housing Material	Polyamide (PA66), Nylon 6/6
Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of terminal block headers is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Number of positions: 16
Pitch spacing: 0.138" (3.50mm)
Header orientation: Vertical
Mounting type: Through hole
Termination style: Solder
Pin configuration: Male pins with 4-side shroud
Voltage rating: 300 V (UL)
Housing material: Polyamide (PA66), Nylon 6/6
Flammability rating: UL94 V-0

Allowable Variation Parameters:

Current rating: Substitute must meet or exceed the application requirement
Operating temperature range: Substitute must cover the required operating envelope
Contact material: Phosphor bronze or brass are both acceptable for this application class
Product status: Active status preferred for long-term availability

The Molex 0395011016 satisfies all mandatory matching parameters and maintains full electrical and mechanical compatibility with the TE Connectivity 1-284514-6 within the specified allowable variations.

Parameter Comparison

Parameter	TE Connectivity 1-284514-6	Molex 0395011016	Compatibility Status
Manufacturer	TE Connectivity AMP Connectors	Molex	Different manufacturers
Number of Positions	16	16	Equivalent
Pitch	0.138" (3.50mm)	0.138" (3.50mm)	Equivalent
Header Orientation	Vertical	Vertical	Equivalent
Mounting Type	Through Hole	Through Hole	Equivalent
Termination Style	Solder	Solder	Equivalent
Pin Configuration	Male Pins, Shrouded (4 Side)	Male Pins, Shrouded (4 Side)	Equivalent
Voltage Rating (UL)	300 V	300 V	Equivalent
Current Rating (UL)	11 A	8 A	Substitute rated lower; acceptable if application current ≤ 8 A
Operating Temperature Range	-40°C ~ 110°C	-40°C ~ 105°C	Substitute range narrower by 5°C at upper limit
Contact Material	Phosphor Bronze	Brass	Both acceptable for this application class
Housing Material	Polyamide (PA66), Nylon 6/6	Polyamide (PA66), Nylon 6/6	Equivalent
Flammability Rating	UL94 V-0	UL94 V-0	Equivalent
Insulation Height	0.362" (9.20mm)	0.360" (9.14mm)	Negligible difference; functionally equivalent
Product Status	Obsolete	Active	Substitute is active; preferred for new procurement
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Equivalent
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	Equivalent

Engineering Selection Recommendations

Primary Substitute: Molex 0395011016

The Molex 0395011016 is a direct functional equivalent for the obsolete TE Connectivity 1-284514-6 based on the following engineering criteria:

Electrical Equivalence: Both components maintain identical voltage ratings (300 V UL) and pitch spacing (0.138" / 3.50mm). The Molex substitute carries a current rating of 8 A versus the original 11 A. This difference is acceptable provided the application circuit operates at or below 8 A per contact.
Mechanical Compatibility: Identical mounting configuration (vertical through-hole), termination method (solder), and physical shroud design (4-side) ensure direct PCB footprint compatibility without layout modification.
Material and Compliance: Both components utilize identical housing materials (Polyamide PA66/Nylon 6/6) and flammability ratings (UL94 V-0). Both are ROHS3 compliant and carry unlimited moisture sensitivity levels (MSL 1).
Thermal Performance: The Molex substitute operates across -40°C to 105°C, which covers the lower end of the original -40°C to 110°C range. Applications requiring operation above 105°C require evaluation of alternative components.
Product Availability: The Molex 0395011016 carries active product status with 1065 units in stock, ensuring long-term availability and supply chain continuity compared to the obsolete original component.

Selection Criteria:

Use Molex 0395011016 when application current requirements do not exceed 8 A per contact
Use Molex 0395011016 when operating temperature does not exceed 105°C
Verify PCB layout accommodates the negligible 0.06mm difference in insulation height (9.20mm original vs. 9.14mm substitute)

Frequently Asked Questions (FAQ)

Q: Can the Molex 0395011016 be used as a direct replacement for the TE Connectivity 1-284514-6 without PCB modification?

A: Yes. Both components share identical pitch spacing (3.50mm), mounting type (through-hole), and pin configuration (16-position male shrouded). No PCB layout changes are required. The insulation height difference of 0.06mm is negligible for standard through-hole applications.

Q: What is the significance of the current rating difference (11 A vs. 8 A)?

A: The current rating specifies the maximum continuous current per individual contact. The Molex substitute is rated at 8 A per contact. If your application requires continuous current exceeding 8 A per contact, the Molex 0395011016 is not suitable. Verify actual circuit current requirements before substitution.

Q: Does the operating temperature range difference affect compatibility?

A: The Molex substitute operates to 105°C maximum, compared to the original 110°C maximum. If your application requires sustained operation above 105°C, the Molex substitute does not meet thermal requirements. For applications operating at or below 105°C, the substitute is fully compatible.

Q: Are the contact materials (Phosphor Bronze vs. Brass) functionally equivalent?

A: Yes. Both phosphor bronze and brass are standard contact materials for terminal block headers in this voltage and current class. Both materials provide equivalent electrical conductivity and corrosion resistance for this application. Contact material selection does not affect substitution compatibility.

Q: What is the significance of the product status change from Obsolete to Active?

A: Active product status indicates the Molex 0395011016 is in current production with established supply chains and long-term availability. The obsolete status of the original component creates supply risk and potential cost escalation. Substitution to an active component mitigates these risks.

Q: Are both components RoHS3 compliant?

A: Yes. Both the TE Connectivity 1-284514-6 and Molex 0395011016 are ROHS3 compliant, meeting current environmental and hazardous substance restrictions for electronic components.

Q: What packaging differences exist between these components?

A: The TE Connectivity original is supplied in standard packaging (packaging type not specified in documentation). The Molex substitute is supplied in bulk packaging. Verify bulk packaging meets your receiving and handling requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message