TE Connectivity AMP Connectors 1-282836-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-282836-5 is a 14 Position Wire to Board Terminal Block with horizontal board mounting and 5.00mm pitch spacing. This component features side entry configuration with through-hole mounting and screw-based rising cage clamp termination. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for ongoing production and maintenance applications.

Substiute Parts

1-282836-5

TE Connectivity AMP ConnectorsIn Stock: 9591-282836-5 Datasheet

Current PartRFQ

0398800314

MolexIn Stock: 8980398800314 Datasheet

SimilarRFQ

ESLM14100

Amphenol PCDIn Stock: 802ESLM14100 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 1-282836-5 are identified based on strict electrical and mechanical parameter alignment. The primary substitution criteria include:

Critical Matching Parameters:

• 14 position configuration
• Horizontal with board mating orientation
• Through-hole mounting type
• Screw-based rising cage clamp termination
• 13.5 A current rating
• 300 V voltage rating
• Wire gauge compatibility (16-30 AWG minimum)
• M3 screw thread specification

Pitch Tolerance Consideration: The main part operates at 0.197" (5.00mm) pitch. Substitute ESLM14100 maintains identical 5.00mm pitch. Substitute 0398800314 operates at 0.200" (5.08mm) pitch, representing a 0.08mm variance. This minor pitch difference remains within standard PCB layout tolerances for terminal block applications.

Parameter Comparison

Engineering Selection Recommendations

ESLM14100 (Amphenol PCD) - Primary Substitute

The ESLM14100 provides the closest electrical and mechanical alignment to the obsolete 1-282836-5. This part maintains identical 5.00mm pitch spacing, eliminating PCB layout modifications. Wire gauge capability extends to 14 AWG, providing broader wire accommodation than the original specification. The component is actively manufactured and RoHS Compliant, supporting modern supply chain requirements and environmental compliance mandates. Operating temperature range of -40°C to 110°C exceeds the original part's specification envelope.

0398800314 (Molex) - Secondary Substitute

The 0398800314 serves as an alternative when ESLM14100 availability is constrained. This part maintains full electrical compatibility with identical current and voltage ratings. The 0.200" (5.08mm) pitch represents a 0.08mm deviation from the original 5.00mm specification. This minor variance accommodates standard PCB manufacturing tolerances in terminal block applications. The component is actively manufactured and ROHS3 Compliant. Torque specification matches the original part at 0.68 Nm (6 Lb-In).

Frequently Asked Questions (FAQ)

Q: Can ESLM14100 be used as a direct replacement for 1-282836-5 without PCB modification?

A: Yes. The ESLM14100 maintains identical 5.00mm pitch spacing and through-hole mounting configuration. No PCB layout changes are required for mechanical or electrical integration.

Q: What is the significance of the pitch difference between ESLM14100 (5.00mm) and 0398800314 (5.08mm)?

A: The 0.08mm pitch variance falls within standard PCB manufacturing tolerances for terminal block applications. Both parts accommodate the same 14-position configuration on standard PCB layouts designed for 5mm-class terminal blocks.

Q: Does the wire gauge difference between 1-282836-5 (16-30 AWG) and ESLM14100 (14-30 AWG) affect compatibility?

A: No. The ESLM14100 extends wire gauge capability to include 14 AWG, providing broader accommodation than the original specification. All wire gauges supported by the original part remain fully supported.

Q: What is the impact of the torque specification difference between 1-282836-5 (0.68 Nm) and ESLM14100 (0.5 Nm)?

A: The ESLM14100 specifies lower torque (0.5 Nm versus 0.68 Nm). Assembly procedures must follow the ESLM14100 torque specification to ensure proper screw clamping without over-tightening. This represents a manufacturing process adjustment rather than a functional incompatibility.

Q: Are both substitute parts RoHS compliant?

A: Yes. ESLM14100 is RoHS Compliant and 0398800314 is ROHS3 Compliant. Both parts satisfy modern environmental and regulatory requirements, whereas the original 1-282836-5 carries "Not applicable" RoHS status due to its obsolete classification.

Q: What packaging formats are available for the substitute parts?

A: ESLM14100 is supplied in Tray packaging with 750 pieces in stock. 0398800314 is supplied in Bulk packaging with 821 pieces in stock. Packaging selection depends on production volume requirements and inventory management protocols.

Q: Can the 0398800314 be used if ESLM14100 is unavailable?

A: Yes. The 0398800314 maintains full electrical compatibility and meets all critical mechanical parameters. The minor 0.08mm pitch variance accommodates standard PCB tolerances. Selection between the two substitutes depends on pitch tolerance requirements and supply availability.