TE Connectivity 1-282825-0 Terminal Block Header Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1-282825-0 is a 10-position vertical terminal block header with male pins, shrouded on two sides, featuring a 0.200" (5.08mm) pitch and solder termination. This component is classified as Active product status and is designed for through-hole mounting applications requiring 15 A current capacity at 300 V. Substitute parts are identified to address inventory availability, alternative sourcing requirements, or specific application constraints while maintaining functional compatibility within the defined electrical and mechanical parameters.

Substiute Parts

1-282825-0

TE Connectivity AMP ConnectorsIn Stock: 11171-282825-0 Datasheet

Current PartRFQ

1753592

Phoenix ContactIn Stock: 12961753592 Datasheet

SimilarRFQ

1755503

Phoenix ContactIn Stock: 68951755503 Datasheet

SimilarRFQ

1755817

Phoenix ContactIn Stock: 18711755817 Datasheet

SimilarRFQ

EDSTL955/10

On Shore Technology Inc.In Stock: 864EDSTL955/10 Datasheet

SimilarRFQ

EDSTLZ955/10

On Shore Technology Inc.In Stock: 914EDSTLZ955/10 Datasheet

SimilarRFQ

ELFH10250

Amphenol PCDIn Stock: 1191ELFH10250 Datasheet

SimilarRFQ

OQ1053500000G

Amphenol AnytekIn Stock: 1504OQ1053500000G Datasheet

SimilarRFQ

OSTOQ105450

On Shore Technology Inc.In Stock: 3518OSTOQ105450 Datasheet

SimilarRFQ

OSTOQ107150

On Shore Technology Inc.In Stock: 52374OSTOQ107150 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 1-282825-0 are grouped based on the following critical parameters that determine functional compatibility:

Primary Substitution Criteria:

• Number of Positions: 10 (fixed requirement)
• Header Orientation: Vertical (fixed requirement)
• Pitch: 0.200" (5.08mm) or 0.197" (5.00mm) (minor tolerance variation acceptable)
• Mounting Type: Through Hole or Solder (application-dependent)
• Voltage - UL: 300 V minimum
• Material Flammability Rating: UL94 V-0 (where specified)
• RoHS Status: ROHS3 Compliant

Substitution Groups:

Group 1: Exact Pitch Match (5.08mm) with 2-Side Shrouding

• OQ1053500000G (Amphenol Anytek): Identical pitch, shrouding configuration, and through-hole mounting. Current rating 12 A (lower than original 15 A).

Group 2: Exact Pitch Match (5.08mm) with 4-Side Shrouding

• ELFH10250 (Amphenol PCD): Identical pitch and through-hole mounting. Enhanced shrouding (4-side) provides additional mechanical protection. Current rating 15 A (matches original).
• 1755817 (Phoenix Contact): Identical pitch with 4-side shrouding. Current rating 12 A (lower than original).
• EDSTLZ955/10 (On Shore Technology Inc.): Identical pitch with solder mounting type. Current rating not specified.
• OSTOQ105450 (On Shore Technology Inc.): Identical pitch with solder mounting type. Current rating not specified.

Group 3: Approximate Pitch Match (5.00mm) with 2-Side Shrouding

• 1753592 (Phoenix Contact): Pitch 0.197" (5.00mm) with 2-side shrouding and through-hole mounting. Current rating 12 A.

Group 4: Approximate Pitch Match (5.00mm) with 4-Side Shrouding

• 1755503 (Phoenix Contact): Pitch 0.197" (5.00mm) with 4-side shrouding and through-hole mounting. Current rating 12 A.
• EDSTL955/10 (On Shore Technology Inc.): Pitch 0.197" (5.00mm) with 4-side shrouding and solder mounting. Current rating not specified.
• OSTOQ107150 (On Shore Technology Inc.): Pitch 0.197" (5.00mm) with 4-side shrouding and solder mounting. Current rating not specified.

Parameter Comparison

Engineering Selection Recommendations

Highest Compatibility Substitutes:

ELFH10250 (Amphenol PCD) is the most direct substitute for the TE Connectivity 1-282825-0. This part maintains identical pitch (0.200" / 5.08mm), identical current rating (15 A), identical voltage rating (300 V), through-hole mounting, and UL94 V-0 flammability compliance. The primary difference is enhanced 4-side shrouding, which provides additional mechanical protection without compromising electrical performance. Operating temperature range is -40°C to 105°C, which covers the original specification of -40°C to 110°C for the majority of applications.

OQ1053500000G (Amphenol Anytek) provides an alternative with identical pitch and shrouding configuration (2-side). This part is suitable for applications where the 2-side shrouding configuration is required. Current rating is 12 A, which is lower than the original 15 A specification. Operating temperature range extends to 115°C, exceeding the original specification.

Secondary Compatibility Substitutes:

1755817 (Phoenix Contact) offers 4-side shrouding with identical pitch (0.200" / 5.08mm) and through-hole mounting. Current rating is 12 A. This part is suitable for applications requiring enhanced mechanical protection where the reduced current rating is acceptable.

Pitch Tolerance Substitutes (5.00mm):

1753592 and 1755503 (Phoenix Contact) feature a pitch of 0.197" (5.00mm), representing a 0.03mm deviation from the original 5.08mm specification. These parts are suitable only for applications where pitch tolerance permits this variation. Both maintain 300 V voltage rating and UL94 V-0 compliance. Current rating is 12 A for both parts.

Solder Mounting Alternatives:

EDSTLZ955/10 and OSTOQ105450 (On Shore Technology Inc.) provide identical pitch (0.200" / 5.08mm) with solder mounting type. These parts are applicable only to applications requiring solder mounting rather than through-hole mounting. Operating temperature range is -30°C to 105°C.

All substitute parts listed maintain ROHS3 compliance and 300 V UL voltage rating, meeting the primary electrical safety requirements of the original component.

Frequently Asked Questions (FAQ)

Q: Can I substitute OQ1053500000G for the TE Connectivity 1-282825-0 in a 15 A application?

A: OQ1053500000G has a current rating of 12 A, which is lower than the original 15 A specification. Substitution is not appropriate for applications requiring the full 15 A capacity. For 15 A applications, ELFH10250 is the appropriate substitute.

Q: What is the difference between 2-side and 4-side shrouding?

A: 2-side shrouding provides mechanical protection on two opposing sides of the terminal block header. 4-side shrouding provides protection on all four sides, offering enhanced mechanical stability and protection against accidental contact. Both configurations maintain identical electrical performance and voltage ratings.

Q: Are the Phoenix Contact parts with 5.00mm pitch (0.197") compatible with the original 5.08mm (0.200") pitch specification?

A: The 5.00mm pitch represents a 0.03mm deviation from the 5.08mm specification. Compatibility depends on the specific application's tolerance requirements. Parts 1753592 and 1755503 are suitable only for applications where this pitch variation is acceptable. Consult application documentation to confirm pitch tolerance requirements.

Q: Can I use EDSTLZ955/10 or OSTOQ105450 as direct replacements?

A: EDSTLZ955/10 and OSTOQ105450 feature solder mounting type, whereas the original 1-282825-0 is designed for through-hole mounting. These parts are suitable only for applications specifically requiring solder mounting. They are not direct replacements for through-hole applications.

Q: Which substitute part has the highest current rating?

A: ELFH10250 and the original 1-282825-0 both have a current rating of 15 A, the highest among all listed parts. All other substitutes have a current rating of 12 A or unspecified current ratings.

Q: Are all substitute parts RoHS3 compliant?

A: All substitute parts listed are ROHS3 compliant, matching the compliance status of the original TE Connectivity 1-282825-0.

Q: What is the operating temperature range for substitute parts?

A: The original part operates from -40°C to 110°C. ELFH10250 operates from -40°C to 105°C, covering most applications within the original range. OQ1053500000G extends to 115°C. On Shore Technology parts (EDSTLZ955/10, OSTOQ105450, EDSTL955/10, OSTOQ107150) operate from -30°C to 105°C, with a higher minimum temperature limit of -30°C compared to the original -40°C specification.

Q: What is the primary advantage of ELFH10250 over the original part?

A: ELFH10250 maintains all critical electrical specifications (15 A current, 300 V voltage, 5.08mm pitch, through-hole mounting) while providing enhanced 4-side shrouding for improved mechanical protection. The housing material differs (PBT versus PA66/Nylon 6/6), but both materials meet UL94 V-0 flammability requirements.