TE Connectivity 1223149-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1223149-1 is an OSP Mini Connector Receptacle with male pin configuration, designed for 50 Ohm coaxial RF applications. This panel-mount solder connector operates across a frequency range up to 18 GHz and is part of the Blindmate series. The component is currently active in production with 715 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or supply chain continuity while maintaining identical functional performance in RF coaxial connector applications.

Substiute Parts

1223149-1

TE Connectivity AMP ConnectorsIn Stock: 8241223149-1 Datasheet

Current PartRFQ

1059566-1

TE Connectivity Aerospace, Defense and MarineIn Stock: 10271059566-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 1223149-1 are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following key parameters that must remain identical:

• Connector style (OSP, Mini)
• Connector type (Receptacle, Male Pin)
• Impedance (50 Ohms)
• Maximum frequency (18 GHz)
• Contact and shield termination method (Solder)
• Mounting configuration (Panel Mount with Flange)
• Operating temperature range (-65°C ~ 125°C)
• Center contact material (Beryllium Copper)
• Center contact plating (Gold)
• Body material (Stainless Steel)
• Dielectric material (PTFE)
• Mating cycle rating (5000)
• Number of ports (1)
• Fastening type (Snap-On)
• Extended insulation feature

The substitute part TE Connectivity 1059566-1 meets all these criteria and is therefore classified as a parametric equivalent. Both parts belong to the Blindmate series and maintain identical functional performance in RF coaxial connector applications.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 1223149-1 and 1059566-1 are active production components with full compliance certifications. The 1223149-1 carries RoHS Compliant status, while the 1059566-1 carries ROHS3 Compliant status. Both parts maintain REACH Affected designation and EAR99 export classification.

The primary distinction between these parts is the voltage rating: the 1223149-1 is rated at 335 V, while the 1059566-1 is rated at 500 V. Selection between these parts should be based on the specific voltage requirements of the application. For applications requiring higher voltage tolerance, the 1059566-1 provides additional margin. For applications with voltage requirements at or below 335 V, either part is suitable.

Both parts are manufactured by TE Connectivity divisions and maintain identical RF performance characteristics, mechanical interfaces, and environmental operating specifications. The 1059566-1 currently has higher inventory availability at 935 units compared to 715 units for the 1223149-1.

Frequently Asked Questions (FAQ)

Q: Are the 1223149-1 and 1059566-1 electrically interchangeable in RF coaxial applications?

A: Yes. Both parts maintain identical impedance (50 Ohms), frequency response (18 GHz maximum), and RF performance characteristics. They are parametric equivalents for RF signal transmission applications.

Q: What is the difference in voltage rating between these parts?

A: The 1223149-1 is rated at 335 V, while the 1059566-1 is rated at 500 V. Both operate across the same temperature range (-65°C ~ 125°C) and maintain identical mechanical and electrical specifications for RF applications. The voltage rating difference reflects the dielectric strength capability of each connector variant.

Q: Can I use the 1059566-1 as a direct replacement for the 1223149-1 in existing designs?

A: Yes. The 1059566-1 is a parametric equivalent with identical connector style, type, impedance, frequency response, termination methods, mounting configuration, and environmental specifications. The higher voltage rating of the 1059566-1 provides additional design margin without affecting RF performance or mechanical compatibility.

Q: Are both parts RoHS compliant?

A: Yes. The 1223149-1 is RoHS Compliant, and the 1059566-1 is ROHS3 Compliant. Both meet regulatory requirements for hazardous substance restrictions.

Q: What is the mating cycle rating for these connectors?

A: Both the 1223149-1 and 1059566-1 are rated for 5000 mating cycles, indicating mechanical durability for repeated connection and disconnection operations.

Q: Do these connectors require special handling for moisture sensitivity?

A: Both parts carry Moisture Sensitivity Level (MSL) 1, which indicates unlimited shelf life without special moisture control measures during storage or handling.

Q: What are the key mechanical compatibility factors between these parts?

A: Both connectors feature identical panel-mount configuration with flange mounting feature, snap-on fastening type, and single-port design. They maintain the same OSP Mini connector style and receptacle male pin configuration, ensuring mechanical interchangeability in panel-mount applications.

Q: Are there any export or regulatory restrictions on these parts?

A: Both parts carry EAR99 export classification and are REACH Affected. They share identical HTSUS code 8536.69.4010 for tariff classification purposes.