TE Connectivity 1-223083-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1-223083-7 is a 120-position Futurebus connector header with male pins for through-hole PCB mounting. This component is classified as obsolete, which necessitates identification of active equivalent and substitute parts for ongoing design requirements and production continuity. The original part features press-fit termination, gold contact finish, and natural color housing with UL94 V-0 flammability rating.

Substiute Parts

1-223083-7

TE Connectivity AMP ConnectorsIn Stock: 8711-223083-7 Datasheet

Current PartRFQ

84817-104001LF

Amphenol ICC (FCI)In Stock: 121984817-104001LF Datasheet

SimilarRFQ

84817-104028LF

Amphenol ICC (FCI)In Stock: 98984817-104028LF Datasheet

SimilarRFQ

84817-104035LF

Amphenol ICC (FCI)In Stock: 107484817-104035LF Datasheet

SimilarRFQ

84817-504001LF

Amphenol ICC (FCI)In Stock: 118884817-504001LF Datasheet

SimilarRFQ

84817-504021LF

Amphenol ICC (FCI)In Stock: 90684817-504021LF Datasheet

SimilarRFQ

89008-116LF

Amphenol ICC (FCI)In Stock: 100017689008-116LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 1-223083-7 is determined by the following critical parameters: connector type (header, male pins), pitch (0.079" / 2.00mm), number of rows (5), mounting type (through hole), termination method (press-fit), contact finish (gold), and material flammability rating (UL94 V-0).

The substitute parts are grouped into two categories based on position count:

Category 1: 120-Position Direct Equivalents The part 89008-116LF provides a direct 120-position match with identical pitch, row configuration, and mounting characteristics. This part is active and RoHS compliant, offering a primary replacement path for the obsolete 1-223083-7.

Category 2: 144-Position High-Speed Alternatives The parts 84817-104001LF, 84817-104028LF, and 84817-104035LF provide 144-position configurations with enhanced shielding and high-speed capabilities. These parts maintain the same pitch, row count, and mounting type but offer increased position density and active product status.

Category 3: 72-Position Reduced-Density Alternatives The parts 84817-504001LF and 84817-504021LF provide 72-position configurations for applications requiring lower connector density while maintaining the same pitch, row configuration, and mounting characteristics.

All substitute parts share the following core compatibility parameters: 0.079" (2.00mm) pitch, 5-row configuration, through-hole mounting, press-fit termination, gold contact finish, UL94 V-0 flammability rating, and MSL 1 rating.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: 89008-116LF

The Amphenol ICC 89008-116LF is the optimal direct replacement for the obsolete TE Connectivity 1-223083-7. This part maintains identical position count (120), pitch (0.079" / 2.00mm), row configuration (5), mounting type (through hole), and termination method (press-fit). The 89008-116LF is active in production, RoHS compliant, and REACH affected, addressing regulatory compliance requirements. Operating temperature range extends to -55°C ~ 125°C, providing broader thermal performance than the original specification. Current rating of 1A is specified. Packaging is provided in tube format with 1,000,100 pieces in stock inventory.

Secondary Recommendation: 84817-104001LF, 84817-104028LF, or 84817-104035LF

These 144-position Metral® 1000 series connectors provide enhanced capability for applications requiring increased connector density. All three parts maintain the same pitch, row count, and mounting characteristics as the original part. These connectors feature shielding and high-speed design with contact layout of 120 signal and 24 ground positions. Operating temperature range is -55°C ~ 105°C with 1A current rating. All three variants are active, RoHS compliant, and REACH affected. Selection among these three variants depends on specific contact layout and shielding requirements for the application.

Alternative Recommendation: 84817-504001LF or 84817-504021LF

These 72-position Metral® 1000 series connectors are suitable for applications requiring reduced connector density while maintaining compatibility with the same pitch, row configuration, and mounting type. Both parts feature shielding and high-speed design with contact layout of 60 signal and 12 ground positions. Operating temperature range is -55°C ~ 105°C with 1A current rating. Both variants are active and RoHS compliant. The 84817-504021LF is REACH affected.

All substitute parts maintain UL94 V-0 flammability rating and MSL 1 moisture sensitivity level, ensuring compatibility with the original part's environmental and reliability specifications.

Frequently Asked Questions (FAQ)

Q: Can the 89008-116LF directly replace the 1-223083-7 without PCB redesign?

A: The 89008-116LF maintains identical position count (120), pitch (0.079" / 2.00mm), row configuration (5), and mounting type (through hole). PCB footprint compatibility depends on specific pad layout and hole sizing. Physical dimensions and contact spacing are equivalent, supporting direct substitution in most applications. Verify mounting hole diameter and pad pattern alignment with your PCB design specifications.

Q: What is the difference between the 144-position and 120-position substitute options?

A: The 144-position variants (84817-104001LF, 84817-104028LF, 84817-104035LF) provide increased connector density with 24 additional positions allocated to ground contacts. These parts feature shielding and high-speed design characteristics. The 120-position variant (89008-116LF) provides a direct position-count match to the original part. Selection depends on whether your application requires the additional ground connections and shielding benefits of the 144-position design.

Q: Are the 72-position alternatives suitable for my application?

A: The 72-position variants (84817-504001LF, 84817-504021LF) are suitable only if your application can accommodate reduced connector density. These parts maintain the same pitch, row configuration, and mounting type but provide 48 fewer positions than the original part. Use these alternatives only if your design requirements permit reduced signal and ground pin count.

Q: What is the significance of RoHS compliance for substitute part selection?

A: The original 1-223083-7 is RoHS non-compliant. All substitute parts listed are RoHS compliant, meeting current regulatory requirements for lead-free manufacturing and restricted substance limitations. RoHS compliance is mandatory for most commercial and industrial applications. Selection of RoHS-compliant substitutes ensures compliance with environmental and regulatory standards.

Q: How do the operating temperature ranges compare?

A: The original 1-223083-7 does not specify an operating temperature range. The 89008-116LF operates from -55°C to 125°C, providing the broadest thermal range. The 144-position and 72-position Metral® 1000 series variants operate from -55°C to 105°C. Select based on your application's thermal requirements. The 89008-116LF is preferred for applications requiring extended high-temperature operation.

Q: What packaging formats are available for the substitute parts?

A: All substitute parts are supplied in tube packaging. Inventory availability is substantial across all variants: 89008-116LF (1,000,100 pieces), 84817-104001LF (1,122 pieces), 84817-104028LF (961 pieces), 84817-104035LF (1,031 pieces), 84817-504001LF (1,115 pieces), and 84817-504021LF (842 pieces). Tube packaging is standard for backplane connector headers.

Q: Are there color options available in the substitute parts?

A: The original 1-223083-7 is natural color. The 89008-116LF is available in natural and white color options. All other substitute parts are natural color. Color selection does not affect electrical or mechanical compatibility; selection is based on application aesthetics and assembly identification requirements.

Q: What is the significance of the contact finish thickness specifications?

A: The original 1-223083-7 does not specify contact finish thickness. The 89008-116LF provides 30.0µin (0.76µm) gold finish thickness. The 144-position variants provide 30.0µin (0.76µm) thickness. The 72-position variants provide 50.0µin (1.27µm) thickness. Thicker gold plating provides enhanced wear resistance and contact durability for high-cycle mating applications. Selection depends on expected connector mating cycles and contact reliability requirements.

Q: What does "REACH Affected" status mean for substitute part selection?

A: REACH Affected status indicates that the part is subject to European REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) regulations. This status requires compliance with substance of very high concern (SVHC) restrictions and documentation requirements. All substitute parts except 84817-504001LF are REACH Affected. Verify REACH compliance requirements for your specific application and supply chain.