1-2176094-9 Equivalent & Substitute Parts

Part Overview

The 1-2176094-9 is a 182 kOhms ±0.1% 0.25W (1/4W) chip resistor manufactured by TE Connectivity Passive Product in the 0805 (2012 Metric) package. This thin film SMD resistor is designed for precision applications requiring tight tolerance and stable performance across the -55°C to 155°C operating temperature range. The part is active and in production. Equivalent and substitute parts are identified for applications where alternative sourcing, specific certifications, or modified power ratings are required.

Substiute Parts

1-2176094-9

TE Connectivity Passive ProductIn Stock: 16421-2176094-9 Datasheet

Current PartRFQ

ERA-6AEB1823V

Panasonic Electronic ComponentsIn Stock: 11252ERA-6AEB1823V Datasheet

DirectRFQ

RG2012P-1823-B-T5

SusumuIn Stock: 4570RG2012P-1823-B-T5 Datasheet

DirectRFQ

RT0805BRD07182KL

YAGEOIn Stock: 2445RT0805BRD07182KL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 1-2176094-9 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 182 kOhms
• Tolerance: ±0.1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Power Rating: The main part is rated at 0.25W (1/4W). Substitute parts rated at 0.125W (1/8W) are acceptable for applications where the circuit design does not require the full 0.25W dissipation capability. The lower power rating does not affect electrical performance in circuits designed for lower power dissipation.

All identified substitute parts match the mandatory parameters and operate within the same electrical and thermal specifications as the main part.

Parameter Comparison

Engineering Selection Recommendations

1-2176094-9 (TE Connectivity RP73P Series) Select this part for applications requiring the full 0.25W power rating and where TE Connectivity sourcing is preferred. Active product status with established supply chain.

ERA-6AEB1823V (Panasonic ERA-6A Series) Select this part for automotive applications requiring AEC-Q200 certification. The 0.125W power rating is suitable for circuits designed within this dissipation limit. REACH Unaffected status provides additional compliance assurance.

RG2012P-1823-B-T5 (Susumu RG Series) Select this part for automotive applications requiring both AEC-Q200 certification and anti-sulfur protection. The lowest seated height (0.020") provides advantages in space-constrained PCB layouts. REACH Unaffected status applies.

RT0805BRD07182KL (YAGEO RT Series) Select this part for general-purpose applications where the 0.125W power rating is sufficient and YAGEO sourcing is preferred. REACH Unaffected status applies.

All substitute parts are active products with established inventory availability and ROHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB1823V, RG2012P-1823-B-T5, or RT0805BRD07182KL be used as direct replacements for 1-2176094-9?

A: Yes, all three substitute parts are electrically and mechanically compatible with 1-2176094-9 for applications where the circuit design does not require the full 0.25W power dissipation. The 0.125W power rating of the substitutes is lower but does not affect performance in circuits designed for lower power dissipation. All parts share identical resistance, tolerance, package, temperature coefficient, and operating temperature range.

Q: What is the difference between the main part and substitute parts regarding power rating?

A: The 1-2176094-9 is rated at 0.25W (1/4W), while ERA-6AEB1823V, RG2012P-1823-B-T5, and RT0805BRD07182KL are rated at 0.125W (1/8W). The lower power rating of the substitutes does not affect electrical performance in circuits where resistor power dissipation remains below 0.125W. Circuit design verification is necessary to confirm power dissipation requirements.

Q: Are the substitute parts suitable for automotive applications?

A: ERA-6AEB1823V and RG2012P-1823-B-T5 carry AEC-Q200 automotive certification. RT0805BRD07182KL and 1-2176094-9 do not specify automotive certification. Selection depends on application requirements.

Q: What is the significance of anti-sulfur protection in RG2012P-1823-B-T5?

A: Anti-sulfur protection is a feature of RG2012P-1823-B-T5 that provides resistance to sulfur-containing environments. This feature is relevant for applications exposed to industrial or corrosive atmospheres. The other substitute parts do not specify this feature.

Q: Do all parts have the same physical dimensions?

A: All parts use the 0805 (2012 Metric) package with identical length (0.079" / 2.00mm) and width (0.049" / 1.25mm). Seated height varies slightly: 1-2176094-9 is 0.026" (0.65mm), ERA-6AEB1823V and RT0805BRD07182KL are 0.024" (0.60mm), and RG2012P-1823-B-T5 is 0.020" (0.50mm). These variations are within standard PCB assembly tolerances.

Q: What is the Moisture Sensitivity Level (MSL) for all parts?

A: All parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Are all parts RoHS3 compliant?

A: Yes, all parts are ROHS3 compliant.