TE Connectivity 1-215083-8 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1-215083-8 is an 18-position rectangular plug connector from the Micro-MaTch series, designed for IDC (Insulation Displacement Contact) termination on 28 AWG ribbon cable. This connector features tin-plated male pins with a 0.100" pitch and is configured as a free-hanging, in-line plug with feed-through capability. The part is currently active in production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when inventory availability requires alternative sourcing while maintaining identical electrical and mechanical specifications.

Key Parameters

Parameter	Value
Connector Type	Plug
Number of Positions	18
Pitch	0.100" (2.54mm)
Number of Rows	2
Row Spacing	0.059" (1.50mm)
Cable Termination Method	IDC
Wire Gauge	28 AWG
Contact Finish	Tin
Series	Micro-MaTch
Mounting Type	Free Hanging (In-Line)

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 1-215083-8 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must maintain identical specifications in the following areas:

Critical Substitution Parameters:

Connector type (Plug)
Position count (18 positions)
Pitch spacing (0.100" / 2.54mm)
Row configuration (2 rows with 0.059" / 1.50mm spacing)
IDC termination compatibility
Wire gauge acceptance (28 AWG)
Contact finish material (Tin)
Series designation (Micro-MaTch)
Mounting configuration (Free Hanging, In-Line)

The identified substitute part 8-215083-8 meets all these requirements, differing only in the base product number prefix while maintaining complete functional and physical interchangeability.

Parameter Comparison

Parameter	1-215083-8 (Main Part)	8-215083-8 (Substitute)	Match Status
Manufacturer	TE Connectivity AMP Connectors	TE Connectivity AMP Connectors	Identical
Category	Rectangular Connectors	Rectangular Connectors	Identical
Series	Micro-MaTch	Micro-MaTch	Identical
Connector Type	Plug	Plug	Identical
Contact Type	Male Pin	Male Pin	Identical
Number of Positions	18	18	Identical
Pitch	0.100" (2.54mm)	0.100" (2.54mm)	Identical
Number of Rows	2	2	Identical
Row Spacing	0.059" (1.50mm)	0.059" (1.50mm)	Identical
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)	Identical
Cable Termination	IDC	IDC	Identical
Wire Type	Ribbon Cable	Ribbon Cable	Identical
Wire Gauge	28 AWG	28 AWG	Identical
Features	Feed Through	Feed Through	Identical
Contact Finish	Tin	Tin	Identical
Color	Red	Red	Identical
Product Status	Active	Active	Identical
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Identical
MSL Rating	1 (Unlimited)	1 (Unlimited)	Identical
REACH Status	REACH Unaffected	REACH Unaffected	Identical
ECCN	EAR99	EAR99	Identical
HTSUS Code	8536.69.4051	8536.69.4051	Identical

Engineering Selection Recommendations

Both the primary part number 1-215083-8 and the substitute 8-215083-8 are active production components manufactured by TE Connectivity AMP Connectors. Selection between these parts is based on inventory availability and supply chain requirements rather than technical differentiation.

Compliance and Certification Status: Both parts maintain identical regulatory compliance profiles, including ROHS3 certification and REACH unaffected status. The MSL 1 rating indicates unlimited moisture sensitivity, suitable for standard storage and handling conditions without desiccant requirements.

Interchangeability: The parts are fully interchangeable in all applications requiring an 18-position IDC rectangular plug connector with 0.100" pitch, 28 AWG ribbon cable termination, and tin-plated male contacts. The feed-through design supports daisy-chain configurations in ribbon cable assemblies.

Supply Chain Considerations: The primary part 1-215083-8 maintains higher inventory levels (41,125 pieces), while the substitute 8-215083-8 carries lower stock (2,259 pieces). Selection should prioritize the primary part number when availability permits.

Frequently Asked Questions (FAQ)

Q: Are the 1-215083-8 and 8-215083-8 connectors physically identical?

A: Yes. Both connectors share identical physical dimensions, contact configurations, and mechanical specifications. The difference in part number prefix does not affect form, fit, or function.

Q: Can I use the 8-215083-8 as a direct replacement for the 1-215083-8 in existing designs?

A: Yes. The 8-215083-8 is a direct substitute with no design modifications required. All electrical and mechanical parameters are identical.

Q: What determines whether a part qualifies as a substitute for the 1-215083-8?

A: Substitution requires exact matching across all critical parameters: 18-position count, 0.100" pitch, 2-row configuration with 0.059" row spacing, IDC termination method, 28 AWG wire gauge compatibility, tin contact finish, and free-hanging in-line mounting type.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both the 1-215083-8 and 8-215083-8 are ROHS3 compliant and REACH unaffected, meeting current environmental and hazardous substance regulations.

Q: What is the significance of the MSL 1 rating?

A: MSL 1 indicates unlimited moisture sensitivity, meaning the connector requires no special moisture control during storage, handling, or assembly. Standard warehouse conditions are acceptable.

Q: Can these connectors be used with wire gauges other than 28 AWG?

A: No. These connectors are specified for 28 AWG ribbon cable. IDC termination is designed for this specific wire gauge.

Q: What does the feed-through feature enable?

A: The feed-through design allows the connector to be used in daisy-chain configurations where ribbon cable passes through the connector, enabling multiple connection points along a single cable run.

Q: Are there any packaging differences between the two part numbers?

A: Both parts are supplied in Cut Tape (CT) packaging. Packaging format is identical.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message