Equivalent & Substitute Parts for 1210SC102MAT3A

Part Overview

The 1210SC102MAT3A is a 1000 pF ceramic capacitor manufactured by KYOCERA AVX, rated at 1500V (1.5kV) with X7R temperature coefficient and 1210 (3225 Metric) package configuration. This component is classified as Active product status and is designed for general-purpose high-voltage applications. Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility within specified parameter tolerances.

Substiute Parts

1210SC102MAT3A

KYOCERA AVXIn Stock: 10341210SC102MAT3A Datasheet

Current PartRFQ

1210GC102KAT1A

KYOCERA AVXIn Stock: 21651210GC102KAT1A Datasheet

UpgradeRFQ

KGM32HR73D102KU

KYOCERA AVXIn Stock: 6449KGM32HR73D102KU Datasheet

UpgradeRFQ

CC1210KKX7RDBB102

YAGEOIn Stock: 9671CC1210KKX7RDBB102 Datasheet

UpgradeRFQ

C3225X7S3D102K200AA

TDK CorporationIn Stock: 2677C3225X7S3D102K200AA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Primary Compatibility Parameters:

• Capacitance value: 1000 pF (exact match required)
• Package / Case: 1210 (3225 Metric) (exact match required)
• Mounting Type: Surface Mount, MLCC (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

Allowable Parameter Variations:

• Voltage Rating: Substitute parts rated at 2000V (2kV) or higher are acceptable as they exceed the 1500V requirement
• Tolerance: Substitute parts with ±10% tolerance are acceptable as they provide tighter tolerance than the original ±20%
• Temperature Coefficient: X7R or X7S are functionally equivalent for this application

All identified substitute parts meet these criteria and are classified as Active product status with ROHS3 compliance and unlimited moisture sensitivity rating.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain Active product status and ROHS3 compliance, ensuring regulatory and supply chain continuity. The substitute parts provide enhanced electrical performance through higher voltage ratings (2000V versus 1500V) and improved tolerance specifications (±10% versus ±20%), making them suitable for direct replacement in applications requiring the 1210SC102MAT3A.

Selection among substitute parts should be based on packaging availability and inventory requirements. KYOCERA AVX parts (1210GC102KAT1A and KGM32HR73D102KU) maintain manufacturer consistency. The YAGEO CC1210KKX7RDBB102 and TDK C3225X7S3D102K200AA provide alternative sourcing from established manufacturers with equivalent electrical specifications.

The TDK C3225X7S3D102K200AA employs X7S temperature coefficient instead of X7R; both coefficients support the specified -55°C ~ 125°C operating range and are functionally equivalent for this application.

Frequently Asked Questions (FAQ)

Q: Can the 1210GC102KAT1A replace the 1210SC102MAT3A directly?

A: Yes. The 1210GC102KAT1A is a direct substitute. It maintains identical capacitance (1000 pF), package (1210), mounting type (Surface Mount, MLCC), and operating temperature range (-55°C ~ 125°C). The higher voltage rating (2000V versus 1500V) and improved tolerance (±10% versus ±20%) provide enhanced performance margins.

Q: What is the difference between X7R and X7S temperature coefficients?

A: Both X7R and X7S are temperature coefficient classifications for ceramic capacitors operating within the -55°C ~ 125°C range specified for this application. X7R provides ±15% capacitance change over temperature, while X7S provides ±22% change. Both are suitable for general-purpose high-voltage applications.

Q: Are there physical dimension differences between substitute parts?

A: All parts use the 1210 (3225 Metric) package. Minor dimensional variations exist: the YAGEO CC1210KKX7RDBB102 and TDK C3225X7S3D102K200AA have slightly different length (0.126" versus 0.130") and thickness specifications (0.057" to 0.087" versus 0.071"). These variations remain within standard 1210 package tolerances and do not affect PCB footprint compatibility.

Q: What packaging options are available for substitute parts?

A: The 1210GC102KAT1A is available in Cut Tape (CT) and Digi-Reel packaging. The KGM32HR73D102KU, CC1210KKX7RDBB102, and C3225X7S3D102K200AA are available in Tape & Reel (TR) format, suitable for automated assembly processes.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), matching the compliance profile of the 1210SC102MAT3A.