Equivalent & Substitute Parts for 1210GC222MAT1A

Part Overview

The 1210GC222MAT1A is a 2200 pF ceramic capacitor rated at 2000V (2kV) with X7R temperature coefficient, manufactured by KYOCERA AVX in 1210 (3225 Metric) surface mount package. This high-voltage multilayer ceramic capacitor (MLCC) is designed for general-purpose applications requiring stable capacitance across operating temperatures from -55°C to 125°C. The part is ROHS3 compliant with MSL 1 rating and remains in active production status. Equivalent and substitute parts are identified when electrical parameters (capacitance, voltage rating, temperature coefficient) and mechanical specifications (package size, mounting type) align within acceptable tolerances for direct circuit board replacement.

Substiute Parts

1210GC222MAT1A

KYOCERA AVXIn Stock: 10131210GC222MAT1A Datasheet

Current PartRFQ

1210GC222KAT1A

KYOCERA AVXIn Stock: 34421210GC222KAT1A Datasheet

UpgradeRFQ

C1210C222MGRAC7800

KEMETIn Stock: 4590C1210C222MGRAC7800 Datasheet

DirectRFQ

C3225X7S3D222K250AA

TDK CorporationIn Stock: 3228C3225X7S3D222K250AA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 1210GC222MAT1A is determined by strict alignment of the following parameters:

Critical Parameters (Must Match Exactly):

• Capacitance: 2200 pF
• Voltage Rating: 2000V (2kV)
• Package / Case: 1210 (3225 Metric)
• Mounting Type: Surface Mount, MLCC
• Operating Temperature Range: -55°C to 125°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variations:

• Tolerance: ±20% (main part) to ±10% (substitute) — tighter tolerance is acceptable
• Temperature Coefficient: X7R (main part) to X7S (substitute) — both provide stable performance across the operating range
• Manufacturer: Different manufacturers permitted if all critical parameters align
• Packaging Format: Bulk or Tape & Reel acceptable for equivalent substitution

Three substitute parts meet these criteria and are listed below.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are active production components with ROHS3 compliance and MSL 1 rating, meeting the regulatory and environmental requirements of the original 1210GC222MAT1A.

1210GC222KAT1A (KYOCERA AVX): Direct upgrade from the same manufacturer with identical electrical and mechanical specifications except for improved tolerance (±10% vs. ±20%). Packaging format is Tape & Reel. This part provides the tightest tolerance match while maintaining identical physical dimensions and temperature coefficient.

C1210C222MGRAC7800 (KEMET): Cross-manufacturer equivalent with matching tolerance (±20%) and temperature coefficient (X7R). Physical dimensions are slightly reduced (3.20mm x 2.50mm vs. 3.30mm x 2.50mm length), with marginally increased thickness (1.90mm vs. 1.80mm). Packaging format is Tape & Reel. This part is suitable for applications where minor dimensional variation is acceptable.

C3225X7S3D222K250AA (TDK): Manufacturer-recommended substitute with improved tolerance (±10%) but different temperature coefficient (X7S vs. X7R). Both X7R and X7S coefficients provide stable capacitance across the -55°C to 125°C operating range. Physical dimensions are reduced in length (3.20mm vs. 3.30mm) with significantly increased thickness (2.80mm vs. 1.80mm). Packaging format is Tape & Reel. This part requires verification of available board space due to increased height.

Frequently Asked Questions (FAQ)

Q: Can 1210GC222KAT1A replace 1210GC222MAT1A directly?

A: Yes. Both parts are manufactured by KYOCERA AVX with identical capacitance (2200 pF), voltage rating (2000V), temperature coefficient (X7R), package size (1210/3225 Metric), and operating temperature range (-55°C to 125°C). The substitute has improved tolerance (±10% vs. ±20%), which is acceptable for direct substitution. Packaging differs (Tape & Reel vs. bulk), but electrical and mechanical compatibility is complete.

Q: What is the difference between X7R and X7S temperature coefficients?

A: Both X7R and X7S are temperature-stable ceramic dielectric types suitable for the -55°C to 125°C operating range specified for this application. X7R provides ±15% capacitance change over temperature, while X7S provides ±22% change. Both maintain stable performance across the full operating range. Selection between them depends on circuit requirements for capacitance stability at temperature extremes.

Q: Are there physical space constraints when using C3225X7S3D222K250AA?

A: C3225X7S3D222K250AA has increased thickness (2.80mm vs. 1.80mm for the original part). Length is slightly reduced (3.20mm vs. 3.30mm). Verify available board space and component clearance before substitution, particularly in applications with height-constrained layouts.

Q: Do all substitute parts meet the same compliance requirements?

A: Yes. All substitute parts are ROHS3 compliant, REACH unaffected, and rated MSL 1 (Unlimited moisture sensitivity level), matching the original 1210GC222MAT1A specifications.

Q: Can tolerance differences affect circuit performance?

A: Tolerance differences (±20% vs. ±10%) affect the range of acceptable capacitance values. Tighter tolerance (±10%) provides more predictable performance in precision circuits. Looser tolerance (±20%) is acceptable for general-purpose applications where capacitance variation within this range does not impact circuit function. Verify circuit requirements before selecting based on tolerance.

Q: Are all substitute parts available in the same packaging formats?

A: The original 1210GC222MAT1A is available in bulk packaging. All three substitute parts are available in Tape & Reel (TR) format. Confirm packaging availability with your supplier if bulk format is required for your assembly process.