1206YC564MAT2A Equivalent & Substitute Parts

Part Overview

The 1206YC564MAT2A is a 0.56 µF ceramic capacitor manufactured by KYOCERA AVX, rated at 16V with X7R temperature coefficient in 1206 (3216 Metric) surface mount package. This part is Active status and ROHS3 compliant. Substitute parts are identified when equivalent capacitance and package specifications are maintained while allowing variations in voltage rating, tolerance, and manufacturer, provided the application requirements are satisfied.

Substiute Parts

1206YC564MAT2A

KYOCERA AVXIn Stock: 11061206YC564MAT2A Datasheet

Current PartRFQ

12065C564KAT2A

KYOCERA AVXIn Stock: 265812065C564KAT2A Datasheet

UpgradeRFQ

C1206C564J3RAC7800

KEMETIn Stock: 3271C1206C564J3RAC7800 Datasheet

UpgradeRFQ

C1206C564K3RAC7800

KEMETIn Stock: 1545C1206C564K3RAC7800 Datasheet

UpgradeRFQ

C1206C564K5RAC7800

KEMETIn Stock: 10892C1206C564K5RAC7800 Datasheet

UpgradeRFQ

CC1206KKX7R7BB564

YAGEOIn Stock: 1978CC1206KKX7R7BB564 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined by three critical parameters: capacitance value (0.56 µF), package type (1206), and temperature coefficient (X7R). All substitute parts maintain these core specifications. Voltage rating may be equal to or higher than the original 16V specification, as higher voltage-rated capacitors are electrically compatible in lower voltage applications. Tolerance variations (±5%, ±10%, ±20%) are acceptable provided the application circuit tolerates the specified deviation. Manufacturer differences are acceptable when all electrical and mechanical parameters align with the original specification.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain Active product status and ROHS3 compliance. Selection between substitute parts depends on circuit voltage requirements and tolerance specifications. Parts with voltage ratings equal to or exceeding the circuit operating voltage are suitable. For applications requiring tighter capacitance tolerance, C1206C564J3RAC7800 (±5%) provides superior accuracy. For applications with higher voltage margins, 12065C564KAT2A and C1206C564K5RAC7800 (both 50V rated) offer increased design headroom. Physical thickness variations range from 0.037" to 0.075", which may impact PCB layout constraints in space-limited designs.

Frequently Asked Questions (FAQ)

Q: Can a higher voltage-rated capacitor replace the 16V original part? A: Yes. A capacitor rated at 25V or 50V is electrically compatible in a 16V application. Higher voltage ratings do not affect circuit performance when the capacitance and temperature coefficient remain constant.

Q: What is the significance of tolerance differences (±5%, ±10%, ±20%)? A: Tolerance defines the acceptable deviation from the nominal 0.56 µF value. Tighter tolerances (±5%) provide more precise capacitance. Circuit design determines whether tighter tolerance is required. All listed tolerances are acceptable for general purpose and bypass/decoupling applications.

Q: Are all substitute parts mechanically compatible with the original footprint? A: Yes. All substitute parts use the 1206 (3216 Metric) package with identical length (0.126") and width (0.063"). Thickness varies between 0.037" and 0.075", which may affect PCB assembly clearance in high-density layouts.

Q: Can KEMET and YAGEO parts replace KYOCERA AVX parts? A: Yes, provided capacitance, voltage rating, temperature coefficient, and package specifications match. Manufacturer differences do not affect electrical compatibility when all electrical parameters are equivalent.

Q: Is MSL 1 (Unlimited) moisture sensitivity maintained across all substitutes? A: Yes. All listed substitute parts have MSL 1 rating, indicating unlimited shelf life and no moisture bake-out requirement before soldering.