1206J0160331FCT Equivalent & Substitute Parts

Part Overview

The 1206J0160331FCT is a 330 pF ceramic capacitor manufactured by Knowles Syfer, rated at 16V with C0G/NP0 temperature coefficient in 1206 (3216 Metric) surface mount package. This component is in active production status and widely used in general purpose applications requiring stable capacitance across temperature ranges from -55°C to 125°C. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part becomes unavailable or when design requirements permit higher voltage ratings.

Substiute Parts

1206J0160331FCT

Knowles SyferIn Stock: 7061206J0160331FCT Datasheet

Current PartRFQ

C1206C331F5GAC7800

KEMETIn Stock: 3188C1206C331F5GAC7800 Datasheet

UpgradeRFQ

KGM31BCG1H331FT

KYOCERA AVXIn Stock: 12448KGM31BCG1H331FT Datasheet

UpgradeRFQ

KGM31BCG2A331FT

KYOCERA AVXIn Stock: 4698KGM31BCG2A331FT Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 1206J0160331FCT is determined by the following mandatory parameters:

• Capacitance value: 330 pF (exact match required)
• Tolerance: ±1% (exact match required)
• Temperature Coefficient: C0G or NP0 (functionally equivalent)
• Package / Case: 1206 (3216 Metric) (exact match required)
• Mounting Type: Surface Mount, MLCC (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match or wider range acceptable)
• RoHS3 Compliance: Required for regulatory alignment

Voltage rating may exceed the original 16V specification, as higher voltage-rated capacitors are backward compatible in circuits designed for lower voltages. Substitute parts are grouped by voltage rating tier: 50V and 100V options are available from KEMET and KYOCERA AVX manufacturers.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain full compliance with ROHS3 regulations and Moisture Sensitivity Level 1 classification, ensuring compatibility with standard PCB assembly processes without additional handling requirements.

The 50V-rated options (C1206C331F5GAC7800 and KGM31BCG1H331FT) provide voltage margin above the original 16V specification while maintaining identical capacitance, tolerance, and temperature coefficient characteristics. These parts are suitable for direct substitution in applications where the circuit design permits higher voltage ratings.

The 100V-rated option (KGM31BCG2A331FT) offers maximum voltage headroom and is applicable in designs requiring enhanced voltage stress margin or in circuits with potential transient overvoltage conditions.

All substitute parts are in active production status with established supply chains and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can a 50V-rated capacitor replace a 16V-rated capacitor in the same circuit?

A: Yes. A capacitor with a higher voltage rating is functionally compatible in circuits designed for lower voltages. The 50V and 100V options provide additional voltage margin without affecting capacitance value, tolerance, or temperature stability.

Q: Are all substitute parts mechanically compatible with the original part?

A: Yes. All substitute parts use the 1206 (3216 Metric) package with identical footprint dimensions (0.126" L x 0.063" W / 3.20mm x 1.60mm), ensuring direct PCB placement compatibility.

Q: What is the significance of C0G and NP0 temperature coefficients?

A: C0G and NP0 are equivalent designations for the same temperature coefficient class, indicating minimal capacitance variation across the -55°C to 125°C operating range. All listed parts meet this specification.

Q: Do substitute parts require different soldering or assembly procedures?

A: No. All substitute parts are Surface Mount MLCC components with Moisture Sensitivity Level 1, requiring no special handling beyond standard PCB assembly processes.

Q: What is the difference between the KEMET and KYOCERA AVX substitute options?

A: Both manufacturers provide equivalent electrical performance at their respective voltage ratings. Selection may be based on procurement availability, supply chain preference, or inventory management requirements.