KYOCERA AVX 12063E104MAT2A Equivalent & Substitute Parts

Part Overview

The KYOCERA AVX 12063E104MAT2A is a 0.1 µF ceramic capacitor rated at 25V with Z5U temperature coefficient in 1206 (3216 Metric) surface mount package. This component is classified as Active product status with ROHS3 compliance and unlimited moisture sensitivity level. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package footprint and functional category.

Substiute Parts

12063E104MAT2A

KYOCERA AVXIn Stock: 78912063E104MAT2A Datasheet

Current PartRFQ

12065E104MAT2A

KYOCERA AVXIn Stock: 2258912065E104MAT2A Datasheet

UpgradeRFQ

C1206C104M5UAC7800

KEMETIn Stock: 118051C1206C104M5UAC7800 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 12063E104MAT2A are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Capacitance: 0.1 µF
• Tolerance: ±20%
• Temperature Coefficient: Z5U
• Operating Temperature Range: 10°C ~ 85°C

Mechanical Parameters (Must Match):

• Package / Case: 1206 (3216 Metric)
• Mounting Type: Surface Mount, MLCC

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Voltage Rating: May be equal to or greater than 25V (uprating permitted)
• Manufacturer: Different manufacturers acceptable if all parameters above are met

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts meet the electrical and mechanical requirements for direct replacement of the 12063E104MAT2A. The 12065E104MAT2A (KYOCERA AVX) provides voltage uprating to 50V while maintaining identical capacitance, tolerance, and temperature coefficient specifications. The C1206C104M5UAC7800 (KEMET) offers equivalent electrical performance with 50V rating and slightly reduced maximum thickness (0.035" vs 0.037"), both within the 1206 package footprint.

All three parts maintain ROHS3 compliance, unlimited moisture sensitivity level (MSL 1), and active product status. Selection between substitutes depends on manufacturer preference, inventory availability, and application voltage margin requirements.

Frequently Asked Questions (FAQ)

Q: Can the 12065E104MAT2A replace the 12063E104MAT2A in all applications?

A: Yes. The 12065E104MAT2A maintains identical capacitance (0.1 µF), tolerance (±20%), temperature coefficient (Z5U), and operating temperature range (10°C ~ 85°C). The increased voltage rating (50V vs 25V) provides additional design margin and does not affect circuit compatibility.

Q: What is the difference between the KYOCERA AVX and KEMET substitute parts?

A: Both parts share identical electrical specifications (0.1 µF, ±20%, Z5U, 50V). The KEMET C1206C104M5UAC7800 has a maximum thickness of 0.035" compared to 0.037" for the KYOCERA AVX parts. Both fit the 1206 (3216 Metric) package footprint and are mechanically compatible.

Q: Are all three parts interchangeable on the same PCB?

A: Yes. All three parts use the same 1206 (3216 Metric) surface mount package with identical length and width dimensions (0.126" x 0.063"). The minor thickness variation (0.035" to 0.037") does not affect PCB assembly compatibility.

Q: Do the substitute parts maintain the same compliance certifications?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and classified as MSL 1 (unlimited moisture sensitivity). Compliance status is identical across all options.

Q: What determines whether a part can substitute for the 12063E104MAT2A?

A: Substitution requires matching capacitance (0.1 µF), tolerance (±20%), temperature coefficient (Z5U), operating temperature range (10°C ~ 85°C), package type (1206), and compliance certifications (ROHS3, MSL 1). Voltage rating may be equal to or greater than 25V.