KYOCERA AVX 12061C563MAT2A Equivalent & Substitute Parts

Part Overview

The KYOCERA AVX 12061C563MAT2A is a 0.056 µF ceramic capacitor rated at 100V with X7R temperature coefficient in 1206 (3216 Metric) surface mount package. This part is Active status and ROHS3 compliant. Equivalent and substitute parts are identified based on matching capacitance, voltage rating, temperature coefficient, package type, and tolerance specifications. Alternative parts may be required due to inventory availability, lead time optimization, or tolerance requirements for specific circuit applications.

Substiute Parts

12061C563MAT2A

KYOCERA AVXIn Stock: 103712061C563MAT2A Datasheet

Current PartRFQ

12061C563JAT2A

KYOCERA AVXIn Stock: 470712061C563JAT2A Datasheet

UpgradeRFQ

12061C563KAT2A

KYOCERA AVXIn Stock: 174612061C563KAT2A Datasheet

UpgradeRFQ

C1206C563K1RAC7800

KEMETIn Stock: 6288C1206C563K1RAC7800 Datasheet

UpgradeRFQ

C1206C563KARAC7800

KEMETIn Stock: 1140C1206C563KARAC7800 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 12061C563MAT2A is determined by the following criteria:

Primary Matching Parameters:

• Capacitance: 0.056 µF (exact match required)
• Temperature Coefficient: X7R (exact match required)
• Package: 1206 (3216 Metric) (exact match required)
• Mounting Type: Surface Mount, MLCC (exact match required)

Allowable Variation Parameters:

• Tolerance: Parts with ±5% or ±10% tolerance are acceptable substitutes for the ±20% specification, as tighter tolerances meet or exceed the original requirement
• Voltage Rating: Parts rated at 100V or higher voltage are acceptable substitutes, as higher voltage ratings provide equivalent or superior performance in the same circuit application
• Manufacturer: KYOCERA AVX and KEMET parts meeting the above criteria are interchangeable

Non-Substitutable Parameters:

• Capacitance value must remain 0.056 µF
• Temperature coefficient must remain X7R
• Package dimensions must remain 1206 (3216 Metric)

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are Active status and ROHS3 compliant, meeting regulatory requirements equivalent to the main part.

12061C563JAT2A (KYOCERA AVX): Direct substitute with tighter ±5% tolerance. Identical voltage rating, package, and thermal characteristics. Higher inventory availability (4602 Pcs) supports supply chain continuity.

12061C563KAT2A (KYOCERA AVX): Direct substitute with ±10% tolerance. Identical voltage rating, package, and thermal characteristics. Maintains KYOCERA AVX manufacturer consistency.

C1206C563K1RAC7800 (KEMET): Cross-manufacturer substitute with ±10% tolerance and 100V rating. Thickness is 0.035" (0.88mm), which is thinner than the original 0.037" (0.94mm). Highest inventory availability (6190 Pcs). Suitable for applications where PCB space constraints favor reduced component height.

C1206C563KARAC7800 (KEMET): Cross-manufacturer substitute with ±10% tolerance and elevated 250V rating. Thickness is 0.043" (1.10mm), which exceeds the original specification. Appropriate for circuits requiring higher voltage margin or operating in elevated voltage environments while maintaining the same capacitance and package footprint.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with tighter tolerance than the original ±20%? A: Yes. Parts with ±5% or ±10% tolerance are direct substitutes, as tighter tolerances meet or exceed the original specification and provide improved circuit performance.

Q: Are KEMET parts compatible with KYOCERA AVX footprints? A: Yes. Both manufacturers produce 1206 (3216 Metric) packages with identical land pattern dimensions. Cross-manufacturer substitution is valid provided all electrical parameters match.

Q: Can I use a 250V rated capacitor in place of a 100V rated capacitor? A: Yes. The C1206C563KARAC7800 rated at 250V is a valid substitute for the 100V application. Higher voltage ratings provide additional safety margin. Note that this part has increased thickness (0.043" vs 0.037"), which may affect PCB assembly clearances.

Q: What is the difference between the KYOCERA AVX ±5% and ±10% tolerance options? A: Both 12061C563JAT2A (±5%) and 12061C563KAT2A (±10%) are valid substitutes. The ±5% part provides tighter capacitance tolerance for applications requiring higher precision. Selection depends on circuit tolerance requirements and inventory availability.

Q: Does component thickness affect PCB assembly? A: Component thickness may impact reflow profile and clearance to adjacent components. The KEMET C1206C563K1RAC7800 is thinner (0.035" vs 0.037"), while C1206C563KARAC7800 is thicker (0.043" vs 0.037"). Verify PCB design clearances before substitution.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant and meet equivalent regulatory requirements.