Equivalent & Substitute Parts: 1200M30-2000-360

Part Overview

The TE Connectivity Measurement Specialties 1200M30-2000-360 is a crash accelerometer classified as a motion sensor. This component is currently listed with an Obsolete product status and ECCN classification. Due to its obsolete designation, sourcing original units presents supply chain constraints. Identifying active equivalent models ensures design continuity and maintains access to functionally compatible alternatives for applications requiring crash acceleration measurement.

Substiute Parts

1200M30-2000-360

TE Connectivity Measurement SpecialtiesIn Stock: 7721200M30-2000-360 Datasheet

Current PartRFQ

1201-2000-360

TE Connectivity Measurement SpecialtiesIn Stock: 8231201-2000-360 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 1200M30-2000-360 is based on the following criteria derived from the provided parameters:

Primary Substitution Basis:

• Manufacturer alignment: TE Connectivity Measurement Specialties maintains product line continuity
• Category match: Motion Sensors classification
• Functional equivalence: Accelerometer technology for acceleration measurement
• Product status transition: From Obsolete to Active status ensures long-term availability

Key Parameters Determining Substitution:

• Acceleration measurement capability (±2000g range)
• Analog output type for signal transmission
• Operating temperature range compatibility (-20°C ~ 85°C)
• Supply voltage compatibility (2V ~ 10V)
• Bandwidth specification (4kHz ~ 28kHz)
• Mounting methodology (Adhesive mounting)

The substitute part 1201-2000-360 belongs to the active 1201 series and maintains electrical and mechanical compatibility within the specified parameter envelope.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The 1200M30-2000-360 carries an Obsolete designation, indicating discontinued manufacturing and limited long-term availability. The 1201-2000-360 maintains Active product status within the TE Connectivity Measurement Specialties portfolio, ensuring continued supply chain access and manufacturing support.

Compliance and Certification: Both components are manufactured by TE Connectivity Measurement Specialties, maintaining consistent quality and certification standards within the motion sensor product line. The substitute part's Active status provides assurance of ongoing compliance with current industry standards and regulatory requirements.

Component Selection Logic: Selection between the obsolete and active models should prioritize the 1201-2000-360 for new designs and long-term production requirements. The obsolete 1200M30-2000-360 remains suitable for legacy system maintenance where existing inventory is available and supply continuity is not a constraint.

Frequently Asked Questions (FAQ)

Q: What is the primary reason for substituting the 1200M30-2000-360?

A: The 1200M30-2000-360 is classified as Obsolete, indicating discontinued production. The 1201-2000-360 is an Active product from the same manufacturer, providing equivalent motion sensor functionality with assured long-term availability.

Q: Are the acceleration measurement ranges compatible between these parts?

A: The substitute part 1201-2000-360 operates at ±2000g acceleration range. The original part's acceleration specification is not provided in the available documentation. Verification of acceleration range requirements against the ±2000g specification of the substitute is necessary for application compatibility.

Q: What are the electrical supply requirements for the substitute part?

A: The 1201-2000-360 requires a supply voltage between 2V and 10V. Confirm that your application's power supply falls within this range before implementation.

Q: How do the output characteristics compare?

A: The 1201-2000-360 provides Analog Voltage output with a sensitivity of 0.21 mV/g. The original part's output type and sensitivity are not specified in the available data. Ensure your signal conditioning and measurement equipment are compatible with analog voltage output at this sensitivity level.

Q: What is the bandwidth specification of the substitute part?

A: The 1201-2000-360 operates across a bandwidth of 4kHz to 28kHz. This bandwidth range must be compatible with your application's frequency response requirements.

Q: Are the mounting methods compatible?

A: The 1201-2000-360 uses Adhesive mounting in a Module package configuration. Confirm that your mechanical design accommodates adhesive mounting before component selection.

Q: What is the operating temperature range?

A: The 1201-2000-360 operates between -20°C and 85°C. Verify that your application environment falls within this temperature specification.

Q: Is the substitute part available in the same package as the original?

A: The 1201-2000-360 is supplied as a Module package type. The original part's package specification is not provided in the available documentation. Mechanical compatibility with your PCB or mounting surface must be confirmed.