Switchcraft 11PKG Barrel Connector - Equivalent & Substitute Parts

Part Overview

The Switchcraft 11PKG is a 6.35mm (0.250", 1/4") mono headphone jack connector designed for panel mount applications. This female connector features solder eyelet termination and includes mounting hardware with thread lock capability. The part is currently active in production with 808 units in stock. Alternative components may be required due to supply constraints, design revisions, or specific application requirements.

Substiute Parts

11PKG

Switchcraft Inc.In Stock: 87911PKG Datasheet

Current PartRFQ

11

TE ConnectivityIn Stock: 165011 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Switchcraft 11PKG is determined by the following critical parameters:

• Connector Type: Phone Jack (female gender)
• Signal Configuration: Mono (2 contacts)
• Mating Diameter: 6.35mm (0.250", 1/4")
• Mounting Configuration: Panel Mount with solder eyelet termination
• Mechanical Interface: Panel hole size 0.375" (9.52mm) and thread size 3/8"-32
• Compliance: RoHS3 compliance required

The identified substitute part (TE Connectivity 11) is listed in the manufacturer's substitution database. However, the provided data for this substitute contains incomplete category and detailed description information, limiting full parameter comparison.

Parameter Comparison

Engineering Selection Recommendations

Both the Switchcraft 11PKG and TE Connectivity 11 maintain active product status and meet ROHS3 compliance requirements. Selection between these components should be based on:

• Availability: TE Connectivity 11 shows higher inventory (1578 units vs. 808 units)
• Regulatory Compliance: Both parts carry EAR99 classification and are not subject to moisture sensitivity concerns
• REACH Compliance: Switchcraft 11PKG provides explicit REACH Unaffected status, while TE Connectivity 11 requires confirmation through the manufacturer

For applications requiring confirmed REACH documentation, the Switchcraft 11PKG is the primary choice. For supply-constrained scenarios, the TE Connectivity 11 offers increased availability.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the Switchcraft 11PKG?

A: Substitutes must maintain identical specifications for connector type (phone jack), gender (female), signal configuration (mono), mating diameter (6.35mm), contact count (2), mounting type (panel mount), and mechanical interface dimensions (0.375" hole, 3/8"-32 thread). RoHS3 compliance is mandatory.

Q: Are there mechanical compatibility concerns when switching between manufacturers?

A: Panel hole size (0.375") and thread size (3/8"-32) are fixed mechanical interfaces. Any substitute must maintain these dimensions to ensure proper panel mounting without modification.

Q: What is the difference in packaging between these parts?

A: The Switchcraft 11PKG is supplied with mounting hardware (nut and washer). The TE Connectivity 11 is packaged in a box format. Packaging differences may affect assembly procedures and component availability per unit.

Q: Do both parts meet the same regulatory requirements?

A: Both parts are ROHS3 compliant and carry EAR99 classification. The Switchcraft 11PKG explicitly states REACH Unaffected status. The TE Connectivity 11 requires REACH information confirmation from the manufacturer before use in REACH-regulated applications.

Q: Can I use these parts interchangeably in existing designs?

A: Mechanical and electrical interfaces are compatible based on the provided specifications. However, verification of detailed dimensional drawings and contact material specifications for the TE Connectivity 11 is recommended before design implementation.