Equivalent & Substitute Parts Reference: 11843

Part Overview

The Master Appliance Co 11843 is a Terminal Butt Splice, Inline, Individual Openings Connector designed for 10-12 AWG wire size, with a yellow fully insulated heat shrink body. This part utilizes solder termination and features two wire entries. Currently, the 11843 is classified as obsolete. Due to its part status and ongoing demand for direct replacements compliant with the same electrical and mechanical requirements, it is necessary to identify alternative model numbers within the terminals category that match all critical parameters.

Substiute Parts

11843

Master Appliance CoIn Stock: 100511843 Datasheet

Current PartRFQ

0191640056

MolexIn Stock: 51040191640056 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute terminal products within this category are grouped strictly based on matching the following critical parameters: terminal type (butt splice, inline, individual openings), number of wire entries, wire gauge compatibility (10-12 AWG), insulation type (fully insulated heat shrink), color (yellow), and termination method (solder or crimp as specified). Only parts fully matching these allowed parameters can be substituted for the 11843.

Parameter Comparison

Engineering Selection Recommendations

The Master Appliance Co 11843 is obsolete and no longer available as a new original part. The Molex 0191640056 matches all critical mechanical and electrical parameters except for the termination method, which is crimp instead of solder. The Molex 0191640056 is active and RoHS3 compliant, with REACH unaffected status, and classified under ECCN EAR99. Selection is based on ongoing product status (active), compliance, and inventory availability, within the provided data.

Frequently Asked Questions (FAQ)

Q: What are the primary criteria for selecting a substitute for the 11843 terminal?
A: The substitute must match the terminal type, number of wire entries, wire gauge specification (10-12 AWG), insulation type (fully insulated heat shrink), color, and mechanical configuration. Only termination type differs between the main and substitute part.

Q: Is the termination method (solder or crimp) considered equivalent for substitution?
A: Based on the provided parameters, the termination type is specified per product but is listed among the key allowed parameters for grouping. Mechanical and electrical fit and insulation style match the main part.

Q: Are there differences in packaging between the primary and substitute part?
A: Both the 11843 and 0191640056 use bulk packaging.

Q: Does the substitute meet current compliance standards?
A: The Molex 0191640056 is listed as RoHS3 compliant and REACH unaffected.

Q: Can different series or manufacturers be considered as direct substitutes?
A: If all listed electrical and mechanical parameters are matched based on the provided information, parts from other series or manufacturers may be included as substitutes. Only explicitly listed part numbers are included here.