TE Connectivity 1-174930-1 Rectangular Connector Housing Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1-174930-1 is a 6-position rectangular connector receptacle housing from the Multi-Lock series. This component serves as the housing structure for receptacle-type connectors with crimp contact termination, designed for free-hanging in-line mounting applications. The part is currently active in production with 500,200 pieces in stock. Alternative equivalent parts may be required due to inventory allocation, supply chain optimization, or specific project sourcing requirements.

Substiute Parts

1-174930-1

TE Connectivity AMP ConnectorsIn Stock: 5002271-174930-1 Datasheet

Current PartRFQ

174930-1

TE Connectivity AMP ConnectorsIn Stock: 3250174930-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 1-174930-1 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Receptacle
• Number of Positions: 6
• Pitch: 0.138" (3.50mm)
• Contact Type: Tab
• Mounting Type: Free Hanging (In-Line)
• Contact Termination: Crimp
• Insulation Material: Polybutylene Terephthalate (PBT)
• Operating Temperature Range: -30°C to 105°C
• Series: Multi-Lock

All substitute parts must maintain identical specifications across these parameters to ensure mechanical and electrical compatibility within the Multi-Lock connector system. Deviations in any of these parameters result in incompatibility and disqualify a part from substitution consideration.

Parameter Comparison

Engineering Selection Recommendations

The substitute part 174930-1 is a direct parametric equivalent to the main part 1-174930-1. Both components are manufactured by TE Connectivity AMP Connectors, maintain identical electrical and mechanical specifications, and carry equivalent compliance certifications.

Compliance Status:

• Both parts are ROHS3 Compliant
• Both parts carry Moisture Sensitivity Level 1 (Unlimited)
• Both parts are classified under ECCN EAR99

Inventory Considerations: The main part 1-174930-1 maintains higher inventory availability at 500,200 pieces. The substitute part 174930-1 has 3,200 pieces in stock. Selection between these equivalent parts should be based on project-specific inventory requirements and supply chain logistics.

Product Status: Both parts maintain Active product status, ensuring continued manufacturer support and availability for production applications.

Frequently Asked Questions (FAQ)

Q: Can 174930-1 be used as a direct replacement for 1-174930-1?

A: Yes. The 174930-1 is a parametric equivalent with identical specifications across all critical parameters including connector type, position count, pitch, contact type, mounting configuration, termination method, insulation material, and operating temperature range. Both parts are from the Multi-Lock series and are fully interchangeable.

Q: What parameters must match for substitution eligibility?

A: Substitution requires identical specifications for: connector type (receptacle), number of positions (6), pitch (0.138"/3.50mm), contact type (tab), mounting type (free hanging in-line), contact termination (crimp), insulation material (PBT), and operating temperature range (-30°C to 105°C). Any deviation in these parameters disqualifies a part from substitution.

Q: Are there differences in compliance or certifications between these parts?

A: Both parts are ROHS3 Compliant and carry identical Moisture Sensitivity Level 1 (Unlimited) ratings. Both are classified as EAR99 for export control purposes. Compliance profiles are equivalent.

Q: What is the difference between the two part numbers?

A: The main part number 1-174930-1 and substitute 174930-1 represent the same connector housing design from TE Connectivity. The difference in part number format does not indicate functional or specification differences. Both are Multi-Lock series 6-position receptacle housings with identical electrical and mechanical characteristics.

Q: Are contacts included with these housings?

A: No. Both the main part and substitute are connector housings only. Contacts are not included and must be sourced separately as specified for your application requirements.

Q: What mounting applications are these housings designed for?

A: Both housings are configured for free-hanging in-line mounting, suitable for applications requiring receptacle connector assemblies with crimp-terminated contacts in a 6-position, 3.50mm pitch configuration.