TE Connectivity 1-1634622-0 BNC Connector Jack Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1-1634622-0 is a BNC connector jack designed for 75-ohm coaxial RF applications. This female socket connector features right-angle panel mount configuration with through-hole solder termination and bulkhead mounting capability. The part operates across a frequency range up to 2 GHz and is rated for 500 volts with an operating temperature range of -55°C to 85°C.

The 1-1634622-0 carries an obsolete product status within the Greenpar series. Identification of equivalent and substitute parts is necessary to ensure design continuity, maintain supply chain flexibility, and support long-term product availability for applications requiring this connector specification.

Substiute Parts

1-1634622-0

TE Connectivity AMP ConnectorsIn Stock: 9541-1634622-0 Datasheet

Current PartRFQ

413194-2

TE Connectivity AMP ConnectorsIn Stock: 981413194-2 Datasheet

Parametric EquivalentRFQ

5413194-2

TE Connectivity AMP ConnectorsIn Stock: 20715413194-2 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 1-1634622-0 are determined by equivalence across the following critical parameters: connector style (BNC), connector type (jack, female socket), impedance (75 ohms), mounting configuration (panel mount, through hole, right angle), contact and shield termination method (solder), frequency capability (2 GHz maximum), voltage rating (500 V), operating temperature range (-55°C to 85°C), mating cycle rating (500), and fastening mechanism (bayonet lock).

The substitute parts 413194-2 and 5413194-2 maintain full electrical and mechanical compatibility with the main part across all specified parameters. Both substitute parts are manufactured by TE Connectivity AMP Connectors and share identical functional specifications for RF coaxial connector applications.

Parameter Comparison

Engineering Selection Recommendations

1-1634622-0 (Main Part)

The 1-1634622-0 is classified as obsolete and carries RoHS compliance certification. Current inventory stands at 887 pieces. This part is suitable for applications where existing designs are locked to the Greenpar series designation or where legacy component traceability is required.

413194-2 (Substitute Part)

The 413194-2 is an active product with 872 pieces in inventory. This part is RoHS non-compliant and carries vendor-undefined REACH status. The 413194-2 is suitable for applications where RoHS compliance is not a design requirement and where active product support is preferred over obsolete inventory.

5413194-2 (Substitute Part)

The 5413194-2 is an active product with the highest inventory availability at 2000 pieces. This part carries ROHS3 compliance certification and REACH-affected status. The 5413194-2 is the recommended selection for new designs, applications requiring RoHS3 compliance, and situations where maximum supply chain availability is a priority.

All three parts maintain electrical and mechanical equivalence across the specified parameter set. Selection between substitute parts should be based on product status requirements, regulatory compliance mandates, and inventory availability constraints.

Frequently Asked Questions (FAQ)

Q: Are the substitute parts 413194-2 and 5413194-2 electrically equivalent to the 1-1634622-0?

A: Yes. Both substitute parts maintain identical electrical specifications including 75-ohm impedance, 2 GHz maximum frequency, 500-volt rating, and -55°C to 85°C operating temperature range. All three parts are BNC jack connectors with solder termination and bayonet fastening.

Q: What is the difference between the 413194-2 and 5413194-2?

A: The primary differences are product status and regulatory compliance. The 413194-2 is RoHS non-compliant with vendor-undefined REACH status. The 5413194-2 is ROHS3 compliant with REACH-affected status. Both parts are mechanically and electrically identical. The 5413194-2 has significantly higher inventory availability (2000 pieces versus 872 pieces).

Q: Can I use the 5413194-2 as a direct replacement for the 1-1634622-0 in existing designs?

A: Yes. The 5413194-2 is a direct parametric equivalent. All mounting dimensions, electrical characteristics, and connector specifications are identical. The connector style, impedance, frequency range, voltage rating, and operating temperature are fully compatible.

Q: What are the material differences between these parts?

A: The 1-1634622-0 uses brass for the center contact material and polyethylene (PE) as the dielectric. The 413194-2 and 5413194-2 use beryllium copper for the center contact material and polymethylpentene (PMP) as the dielectric. Both material sets are compatible with the specified electrical and mechanical parameters.

Q: Which part should I select for a new design?

A: The 5413194-2 is recommended for new designs. It is an active product with ROHS3 compliance, REACH-affected status, and the highest inventory availability. This selection ensures long-term supply chain support and regulatory compliance.

Q: Are there packaging differences between these parts?

A: The 1-1634622-0 packaging is not specified. Both 413194-2 and 5413194-2 are supplied in bulk packaging. Packaging format does not affect electrical or mechanical compatibility.

Q: What is the mating cycle rating for these connectors?

A: All three parts are rated for 500 mating cycles. This specification is identical across the 1-1634622-0, 413194-2, and 5413194-2.