Request Quote
(Ships tomorrow)
TE Connectivity 1-1634585-2 D-Sub Receptacle Equivalent & Substitute Parts
Part Overview
The TE Connectivity AMP Connectors 1-1634585-2 is a 15 Position D-Sub Receptacle with female sockets, right-angle through-hole mounting, and solder termination. This connector belongs to the AMPLIMITE HD-20 series and features a 2-row (DA, A) shell size configuration with gold-plated phosphor bronze contacts rated at 5A and 250V.
The 1-1634585-2 is classified as obsolete. Equivalent and substitute D-Sub receptacle connectors are available from active product lines that maintain functional compatibility within specified electrical and mechanical parameters. Substitution is necessary to ensure continued availability and access to components with current manufacturing support and compliance certifications.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Connector Type | Receptacle, Female Sockets |
| Number of Positions | 15 |
| Number of Rows | 2 |
| Shell Size, Connector Layout | 2 (DA, A) |
| Mounting Type | Through Hole, Right Angle |
| Termination | Solder |
| Current Rating (Amps) | 5A |
| Voltage Rating | 250V |
| Operating Temperature | -55°C ~ 105°C |
| Shell Material, Finish | Steel, Nickel Plated |
| Contact Material | Phosphor Bronze |
| Contact Finish | Gold |
| Backset Spacing | 0.411" (10.43mm) |
| RoHS Status | ROHS3 Compliant |
| Material Flammability Rating | UL94 V-0 |
Substitute Part Grouping Explanation
Substitution of the 1-1634585-2 is determined by strict adherence to the following critical parameters:
Mandatory Compatibility Parameters:
- Connector Type: Receptacle, Female Sockets
- Number of Positions: 15
- Number of Rows: 2
- Shell Size, Connector Layout: 2 (DA, A)
- Mounting Type: Through Hole, Right Angle
- Termination: Solder
- Material Flammability Rating: UL94 V-0
Electrical Performance Parameters:
- Current Rating: Minimum 5A per contact
- Voltage Rating: Minimum 250V
- Operating Temperature Range: Must encompass -55°C to 105°C
Mechanical Parameters:
- Backset Spacing: 0.411" (10.43mm) or equivalent within tolerance
- Contact Material: Phosphor Bronze or equivalent copper alloy
- Contact Finish: Gold plating
Substitute parts are grouped into two categories:
Category 1 - Direct Functional Equivalents: Parts that maintain all critical parameters including current rating, voltage rating, backset spacing, and contact material specifications. These parts are interchangeable without design modification.
Category 2 - Functional Alternatives: Parts that maintain core connector geometry, position count, and mounting configuration but may differ in specific electrical ratings, contact materials, or shell finishes. These parts require engineering evaluation for application-specific compatibility.
Parameter Comparison
| Part Number | Manufacturer | Product Status | Positions | Rows | Shell Size | Mounting | Current Rating (A) | Voltage Rating | Backset Spacing | Contact Material | Contact Finish | Operating Temp (°C) | RoHS Status |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1-1634585-2 | TE Connectivity AMP | Obsolete | 15 | 2 | 2 (DA, A) | Through Hole, R/A | 5 | 250V | 0.411" (10.43mm) | Phosphor Bronze | Gold | -55 ~ 105 | ROHS3 |
| 2301845-1 | TE Connectivity AMP | Active | 15 | 2 | 2 (DA, A) | Through Hole, R/A | 2 | 250VAC | 0.411" (10.43mm) | Brass | Gold | -55 ~ 105 | ROHS3 |
| 5747845-3 | TE Connectivity AMP | Active | 15 | 2 | 2 (DA, A) | Through Hole, R/A | 6 | 125V | 0.318" (8.08mm) | Phosphor Bronze | Gold | -55 ~ 105 | RoHS |
| 09662126603 | HARTING | Active | 15 | 2 | 2 (DA, A) | Through Hole, R/A | 6.5 | Not Specified | 0.409" (10.40mm) | Copper Alloy | Not Specified | -55 ~ 125 | ROHS3 |
| 09662127603 | HARTING | Active | 15 | 2 | 2 (DA, A) | Through Hole, R/A | 6.5 | Not Specified | 0.409" (10.40mm) | Copper Alloy | Not Specified | -55 ~ 125 | ROHS3 |
| 09662527613 | HARTING | Active | 15 | 2 | 2 (DA, A) | Through Hole, R/A | 6.5 | Not Specified | 0.409" (10.40mm) | Copper Alloy | Not Specified | -55 ~ 125 | ROHS3 |
| 09662536613 | HARTING | Active | 15 | 2 | 2 (DA, A) | Through Hole, R/A | 6.5 | Not Specified | 0.409" (10.40mm) | Copper Alloy | Not Specified | -55 ~ 125 | ROHS3 |
| 09662537613 | HARTING | Active | 15 | 2 | 2 (DA, A) | Through Hole, R/A | 6.5 | Not Specified | 0.409" (10.40mm) | Copper Alloy | Not Specified | -55 ~ 125 | ROHS3 |
| 09662566613 | HARTING | Active | 15 | 2 | 2 (DA, A) | Through Hole, R/A | 6.5 | Not Specified | 0.409" (10.40mm) | Copper Alloy | Not Specified | -55 ~ 125 | ROHS3 |
| 09662577613 | HARTING | Active | 15 | 2 | 2 (DA, A) | Through Hole, R/A | 6.5 | Not Specified | 0.409" (10.40mm) | Copper Alloy | Gold | -55 ~ 125 | ROHS3 |
| D15S13B6UA00LF | Amphenol ICC (FCI) | Active | 15 | 2 | 2 (DA, A) | Through Hole, R/A | 5 | 300V | 0.409" (10.40mm) | Phosphor Bronze | Gold | -55 ~ 125 | RoHS |
Engineering Selection Recommendations
Direct Equivalent - Active Product:
The D15S13B6UA00LF (Amphenol ICC / FCI, Delta D series) is the primary equivalent for the 1-1634585-2. This part maintains identical current rating (5A), equivalent voltage rating (300V exceeds 250V requirement), matching contact material (Phosphor Bronze), gold contact finish, and compatible backset spacing (0.409" vs. 0.411"). The part is in active production status with RoHS compliance certification. Operating temperature range extends to 125°C, exceeding the original specification of 105°C.
Alternative from TE Connectivity - Active Product:
The 2301845-1 (TE Connectivity AMP, AMPLIMITE HD-20 series) maintains the same manufacturer lineage and series designation as the original part. However, the current rating is reduced to 2A per contact, which is below the 5A specification of the 1-1634585-2. This part is suitable only for applications with reduced current requirements. Contact material differs (Brass vs. Phosphor Bronze). Product status is active with ROHS3 compliance.
Alternative from TE Connectivity - Active Product:
The 5747845-3 (TE Connectivity AMP, AMPLIMITE HD-20 series) provides higher current rating (6A) and maintains phosphor bronze contact material with gold finish. However, the voltage rating is reduced to 125V (below the 250V requirement), and backset spacing differs at 0.318" (8.08mm) versus 0.411" (10.43mm). This part is not recommended for direct substitution due to voltage and spacing incompatibilities.
HARTING Series - Active Products:
The HARTING D-Sub receptacles (09662126603, 09662127603, 09662527613, 09662536613, 09662537613, 09662566613, 09662577613) provide higher current ratings (6.5A) and extended operating temperature to 125°C. Backset spacing is 0.409" (10.40mm), which is within tolerance of the original 0.411" (10.43mm). Contact material is copper alloy. Voltage rating specifications are not provided for these parts. ROHS3 compliance is confirmed. These parts are suitable for applications where voltage rating is not a limiting factor and where the slightly different backset spacing is acceptable.
Compliance and Certification:
All substitute parts maintain UL94 V-0 material flammability rating. ROHS3 compliance is confirmed for HARTING and TE Connectivity 2301845-1 parts. The Amphenol ICC D15S13B6UA00LF carries RoHS compliance. All parts are classified under HTSUS 8536.69.4040 and ECCN EAR99.
Frequently Asked Questions (FAQ)
Q: Can the 1-1634585-2 be directly replaced with the D15S13B6UA00LF?
A: Yes. The D15S13B6UA00LF maintains the same 15-position, 2-row D-Sub receptacle configuration with right-angle through-hole solder termination. Both parts feature phosphor bronze contacts with gold plating and operate across the required temperature range. The D15S13B6UA00LF provides equivalent 5A current rating and exceeds the 250V voltage requirement at 300V. Backset spacing differs by 0.002" (0.02mm), which is within standard manufacturing tolerance.
Q: What is the difference between the TE Connectivity 2301845-1 and the original 1-1634585-2?
A: The 2301845-1 is from the same manufacturer and series (AMPLIMITE HD-20) but has a reduced current rating of 2A per contact compared to the 5A rating of the 1-1634585-2. The contact material is brass instead of phosphor bronze. The 2301845-1 is suitable only for applications with lower current requirements. Both parts maintain the same 15-position configuration, voltage rating (250V), and operating temperature range.
Q: Why do the HARTING parts not specify voltage rating?
A: Voltage rating specifications are not provided in the technical data for the HARTING D-Sub receptacles listed. When voltage rating is not specified by the manufacturer, the part cannot be confirmed for applications requiring a specific voltage rating such as the 250V requirement of the original 1-1634585-2. Engineering evaluation with the manufacturer is necessary to determine voltage capability.
Q: Are the HARTING parts compatible with the original 1-1634585-2 in terms of physical fit?
A: The HARTING parts maintain the same 15-position, 2-row D-Sub shell size (2 / DA, A) and right-angle through-hole mounting configuration. Backset spacing is 0.409" (10.40mm) compared to 0.411" (10.43mm) in the original part, a difference of 0.002" (0.02mm). This difference is within standard manufacturing tolerance and does not affect physical fit or mating with standard D-Sub plugs. All HARTING alternatives feature board lock functionality and mating-side female screwlock features.
Q: What is the significance of the contact finish thickness specification?
A: The original 1-1634585-2 specifies gold contact finish thickness of 15.0µin (0.38µm). The D15S13B6UA00LF specifies 30.0µin (0.76µm), which is double the thickness. Thicker gold plating provides enhanced corrosion resistance and extended contact life. The HARTING parts do not specify contact finish thickness. Thicker plating is generally beneficial for long-term reliability in corrosive environments.
Q: Can the 5747845-3 be used as a substitute?
A: The 5747845-3 is not recommended as a direct substitute. While it maintains the same connector type, position count, and mounting configuration, the voltage rating is reduced to 125V (below the 250V requirement), and the backset spacing differs at 0.318" (8.08mm) versus 0.411" (10.43mm). The spacing difference may affect compatibility with existing mating connectors. Use of this part requires engineering evaluation for the specific application.
Q: What packaging options are available for the substitute parts?
A: The D15S13B6UA00LF is supplied in Tray packaging. The TE Connectivity 2301845-1 is supplied in Tray packaging. The HARTING parts (09662126603, 09662127603, 09662527613, 09662536613, 09662537613, 09662566613, 09662577613) are supplied in Bulk packaging. Packaging selection may affect procurement lead times and handling requirements.
Q: Are all substitute parts RoHS compliant?
A: ROHS3 compliance is confirmed for the HARTING series and TE Connectivity 2301845-1. The Amphenol ICC D15S13B6UA00LF carries RoHS compliance. All parts meet environmental compliance requirements for restricted substance use.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts