TE Connectivity 1-1634508-0 BNC Connector Jack Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1-1634508-0 is a BNC connector jack designed for 75-ohm coaxial RF applications. This component is a female socket connector with right-angle panel mount configuration, through-hole solder termination, and bayonet lock fastening. The part is classified as obsolete, necessitating identification of active equivalent components that maintain electrical and mechanical compatibility for continued system support and new design implementations.

Substiute Parts

1-1634508-0

TE Connectivity AMP ConnectorsIn Stock: 10171-1634508-0 Datasheet

Current PartRFQ

5222092-3

TE Connectivity AMP ConnectorsIn Stock: 13185222092-3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 1-1634508-0 with the active part 5222092-3 is based on strict electrical and mechanical parameter equivalence. Both components share identical specifications across all critical functional parameters: BNC connector style, female jack configuration, 75-ohm impedance, panel mount through-hole right-angle orientation, solder termination for both contact and shield, 2 GHz maximum frequency, 500 V voltage rating, -55°C to 85°C operating temperature range, 500 mating cycles, and bayonet lock fastening.

The substitute part maintains compatibility through matching:

• Connector electrical characteristics (impedance, frequency, voltage)
• Mechanical mounting configuration (panel mount, through-hole, right-angle, bulkhead front-side nut)
• Termination method (solder contact and shield)
• Environmental operating parameters (temperature range, mating cycles)
• Fastening mechanism (bayonet lock)

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 5222092-3 serves as the direct active equivalent for the obsolete 1-1634508-0. Selection of the substitute part is supported by:

Product Status: The 5222092-3 maintains active production status, ensuring long-term availability and supply chain continuity compared to the obsolete 1-1634508-0.

Regulatory Compliance: Both parts maintain REACH compliance. The substitute part carries ROHS3 certification, representing current regulatory alignment. Both components share identical ECCN (EAR99) and HTSUS (8536.69.4010) classifications.

Electrical and Mechanical Equivalence: Complete parameter alignment across impedance, frequency response, voltage rating, operating temperature range, mating cycle rating, and mechanical configuration ensures functional interchangeability in existing circuit designs and new implementations.

Material Composition: While the center contact material differs (brass in the original versus beryllium copper in the substitute), both materials are standard for BNC connector applications and maintain equivalent electrical performance at the specified 2 GHz maximum frequency and 75-ohm impedance.

Frequently Asked Questions (FAQ)

Q: Can the 5222092-3 directly replace the 1-1634508-0 in existing designs?

A: Yes. The 5222092-3 maintains complete electrical and mechanical compatibility with the 1-1634508-0 across all specified parameters including impedance, frequency response, voltage rating, operating temperature, mounting configuration, and termination method.

Q: What is the primary reason for substitution?

A: The 1-1634508-0 is classified as obsolete. The 5222092-3 is the active equivalent part from TE Connectivity AMP Connectors, ensuring continued availability and supply chain support.

Q: Are there differences in material composition between these parts?

A: The center contact material differs: the 1-1634508-0 uses brass while the 5222092-3 uses beryllium copper. Both materials are suitable for BNC connector applications and deliver equivalent electrical performance at the specified operating parameters.

Q: What is the packaging difference?

A: The 1-1634508-0 packaging is not specified in available documentation. The 5222092-3 is supplied in tube packaging.

Q: Do both parts meet current regulatory requirements?

A: Both parts are REACH Affected and maintain compliance. The 5222092-3 carries ROHS3 certification, representing alignment with current regulatory standards. Both share identical ECCN and HTSUS classifications.

Q: Are the operating temperature ranges identical?

A: Yes. Both parts operate across the -55°C to 85°C temperature range with identical voltage rating (500 V) and mating cycle specification (500 cycles).

Q: What is the maximum frequency specification for these connectors?

A: Both the 1-1634508-0 and 5222092-3 are rated for 2 GHz maximum frequency operation at 75-ohm impedance.

Q: Are the mounting configurations identical?

A: Yes. Both parts feature panel mount, through-hole, right-angle configuration with bulkhead front-side nut mounting feature and bayonet lock fastening.