TE Connectivity 1-1614969-0 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1-1614969-0 is a 30 Ohm ±0.1% thin film chip resistor rated at 0.125W (1/8W) in a 1206 (3216 Metric) surface mount package. This component is classified as obsolete product status. Locating equivalent and substitute parts is necessary due to discontinued manufacturing and limited inventory availability. Substitute parts must maintain electrical performance characteristics including resistance value, tolerance, power rating, and thermal specifications to ensure functional compatibility in circuit applications.

Substiute Parts

1-1614969-0

TE Connectivity Passive ProductIn Stock: 11311-1614969-0 Datasheet

Current PartRFQ

RT1206BRD0730RL

YAGEOIn Stock: 17539RT1206BRD0730RL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 1-1614969-0 are qualified based on the following electrical and mechanical parameters:

Critical Matching Parameters:

• Resistance value: 30 Ohms
• Tolerance: ±0.1%
• Package / Case: 1206 (3216 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Number of Terminations: 2
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Power Rating: Substitute parts may have equal or higher power ratings. The YAGEO RT1206BRD0730RL provides 0.25W (1/4W) rating, which exceeds the original 0.125W (1/8W) specification and is acceptable for direct substitution.
• Physical dimensions: Minor variations within standard 1206 package tolerances are permissible.

Parameter Comparison

Engineering Selection Recommendations

The YAGEO RT1206BRD0730RL is a direct functional substitute for the TE Connectivity 1-1614969-0. Both components share identical electrical specifications including resistance value, tolerance, temperature coefficient, and operating temperature range. The substitute part features an increased power rating of 0.25W compared to the original 0.125W specification, which provides enhanced thermal margin and is fully compatible with applications designed for the original component.

The YAGEO substitute maintains active product status with confirmed ROHS3 compliance and REACH unaffected certification, ensuring long-term availability and regulatory compliance. Both components are classified under identical HTSUS and ECCN codes, confirming equivalent trade and export classification.

Physical dimensions remain within standard 1206 package tolerances, with both components featuring identical termination count and moisture sensitivity ratings. The substitute part is available in Tape & Reel packaging format suitable for automated assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the YAGEO RT1206BRD0730RL replace the TE Connectivity 1-1614969-0 in existing circuit designs?

A: Yes. Both components are 30 Ohm ±0.1% thin film resistors in 1206 packages with identical temperature coefficients and operating ranges. The YAGEO substitute has a higher power rating (0.25W vs. 0.125W), which is acceptable for direct substitution and provides additional thermal headroom.

Q: Are there physical compatibility concerns between these two parts?

A: No. Both components use the 1206 (3216 Metric) package with two terminations. Physical dimensions are within standard package tolerances, and both have identical moisture sensitivity levels (MSL 1). PCB footprints and assembly processes remain unchanged.

Q: What is the significance of the higher power rating on the substitute part?

A: The YAGEO RT1206BRD0730RL is rated at 0.25W compared to the original 0.125W. This higher rating indicates greater power dissipation capability and thermal stability. Applications designed for the original 0.125W component operate safely with the higher-rated substitute.

Q: Are there regulatory or compliance differences between these parts?

A: The YAGEO substitute is ROHS3 compliant, while the original part does not specify RoHS status. Both components are REACH unaffected and share identical ECCN (EAR99) and HTSUS classifications, confirming equivalent regulatory treatment.

Q: Why is the TE Connectivity part listed as obsolete?

A: The TE Connectivity 1-1614969-0 is classified as obsolete due to discontinued manufacturing. The YAGEO RT1206BRD0730RL maintains active product status with confirmed availability, making it the appropriate long-term solution for new designs and component replenishment.

Q: Are tolerance and temperature specifications identical between these parts?

A: Yes. Both components feature ±0.1% tolerance, ±25ppm/°C temperature coefficient, and -55°C ~ 155°C operating temperature range. Electrical performance characteristics are equivalent across all specified parameters.