3M 11-56S Ring Terminal Connector 18-22 AWG #5/16 Stud

Part Overview

The 3M 11-56S is a non-insulated ring terminal connector designed for circular stud applications with a 5/16 inch stud size. This component is rated for 18-22 AWG wire gauges and utilizes crimp termination technology. The part is currently active in production and maintains full ROHS3 compliance. Equivalent and substitute parts are identified when identical electrical and mechanical parameters are maintained across alternative manufacturers, ensuring direct interchangeability in applications requiring this specific terminal configuration.

Substiute Parts

11-56S

3MIn Stock: 117611-56S Datasheet

Current PartRFQ

P18-56R-C

Panduit CorpIn Stock: 1926P18-56R-C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3M 11-56S is determined by strict equivalence across the following critical parameters:

• Terminal Type: Circular configuration
• Stud/Tab Size: 5/16 inch stud diameter
• Wire Gauge Range: 18-22 AWG
• Termination Technology: Crimp connection
• Insulation Classification: Non-insulated
• Contact Material: Copper base composition
• Contact Finish: Tin plating
• Mounting Configuration: Free hanging in-line orientation
• Regulatory Compliance: ROHS3 Compliant status

The Panduit Corp P18-56R-C meets all specified electrical and mechanical parameters and qualifies as a direct substitute for the 3M 11-56S in applications requiring this terminal specification.

Parameter Comparison

Engineering Selection Recommendations

Both the 3M 11-56S and Panduit P18-56R-C maintain active product status with full ROHS3 compliance and identical export classification (EAR99). The Panduit P18-56R-C incorporates a brazed seam construction with serrated termination features, while the 3M 11-56S utilizes butted seam construction. Both designs satisfy the specified electrical and mechanical requirements for 18-22 AWG circular ring terminals with 5/16 inch stud configuration. Selection between these parts may be based on inventory availability, supply chain considerations, or specific application requirements related to seam construction methodology.

Frequently Asked Questions (FAQ)

Q: Can the Panduit P18-56R-C directly replace the 3M 11-56S in existing applications?

A: Yes. Both parts maintain identical terminal type, stud size, wire gauge range, termination method, insulation classification, contact material, contact finish, and mounting configuration. Both are ROHS3 compliant and active products.

Q: What are the dimensional differences between these parts?

A: The width outer edges measurement differs slightly (3M: 0.470 inches vs. Panduit: 0.460 inches) and overall length differs marginally (3M: 0.880 inches vs. Panduit: 0.910 inches). These variations remain within acceptable tolerances for the 5/16 stud circular terminal category.

Q: Are there construction differences between the 3M and Panduit versions?

A: The 3M 11-56S features butted seam construction, while the Panduit P18-56R-C incorporates brazed seam construction with serrated termination. Both construction methods are suitable for crimp termination applications within the specified wire gauge range.

Q: Do both parts carry the same regulatory certifications?

A: Yes. Both the 3M 11-56S and Panduit P18-56R-C are ROHS3 compliant and classified under ECCN EAR99 with HTSUS code 8536.90.4000.

Q: What packaging options are available?

A: Both parts are supplied in bulk packaging format.