TE Connectivity AMP Connectors 1-1470213-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-1470213-6 is a rectangular connector header designed for through-hole mounting applications. This connector features a vertical orientation with 16 positions arranged in 2 rows at 0.079" (2.00mm) pitch, supporting board-to-board or cable interconnections with push-pull fastening. The part is classified as obsolete, necessitating identification of active equivalent alternatives for ongoing procurement and new design implementations.

Substiute Parts

1-1470213-6

TE Connectivity AMP ConnectorsIn Stock: 9761-1470213-6 Datasheet

Current PartRFQ

NRPN082PAEN-RC

Sullins Connector SolutionsIn Stock: 1512NRPN082PAEN-RC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 1-1470213-6 with the Sullins Connector Solutions NRPN082PAEN-RC is based on alignment of the following critical parameters:

Matching Parameters:

• Connector type: Header
• Contact type: Male Pin
• Number of positions: 16
• Number of rows: 2
• Pitch - mating: 0.079" (2.00mm)
• Row spacing - mating: 0.079" (2.00mm)
• Mounting type: Through Hole
• Termination: Solder
• Fastening type: Push-Pull
• Shrouding: Unshrouded
• Operating temperature range: -40°C ~ 105°C
• Material flammability rating: UL94 V-0
• Insulation color: Black
• Contact finish - mating: Gold

The NRPN082PAEN-RC maintains functional and mechanical compatibility with the original part while offering active product status and enhanced electrical specifications.

Parameter Comparison

Engineering Selection Recommendations

The Sullins Connector Solutions NRPN082PAEN-RC serves as the primary substitute for the obsolete TE Connectivity 1-1470213-6. Selection of this alternative is supported by the following factors:

Product Status: The NRPN082PAEN-RC maintains active product status, ensuring continued availability and supply chain reliability for new designs and production requirements.

Regulatory Compliance: The substitute part achieves ROHS3 compliance and REACH unaffected status, meeting current environmental and regulatory standards. The original part carries undefined REACH status, making the substitute preferable for applications subject to regulatory oversight.

Electrical Specifications: The NRPN082PAEN-RC provides enhanced current rating of 2A compared to the original 1A specification. The voltage rating of 150V is suitable for applications operating below 250VAC; designs requiring the full 250VAC rating must evaluate application requirements independently.

Mechanical Compatibility: Both parts maintain identical pitch, row spacing, mounting type, and fastening mechanisms. Minor variations in contact length (0.157" versus 0.141") and insulation height (0.059" versus 0.079") are within acceptable tolerances for standard board-to-board interconnection applications.

Material Specifications: The substitute employs brass contacts with polyamide insulation, compared to copper alloy contacts with thermoplastic insulation in the original. Both configurations maintain UL94 V-0 flammability rating and identical operating temperature range.

Frequently Asked Questions (FAQ)

Q: Are the 1-1470213-6 and NRPN082PAEN-RC mechanically interchangeable?

A: Yes. Both connectors share identical pitch (0.079" / 2.00mm), row spacing (0.079" / 2.00mm), number of positions (16), row configuration (2 rows), mounting type (through hole), and fastening mechanism (push-pull). Minor dimensional variations in contact length and insulation height do not prevent mechanical mating in standard applications.

Q: What is the difference in electrical ratings between these parts?

A: The NRPN082PAEN-RC provides 2A current rating versus 1A for the original part, representing a 100% increase in current capacity. The voltage rating differs at 150V for the substitute versus 250VAC for the original. Applications requiring 250VAC operation must confirm compatibility with the 150V rating of the substitute.

Q: Why is the NRPN082PAEN-RC recommended over the original part?

A: The original TE Connectivity 1-1470213-6 is classified as obsolete, creating supply and procurement challenges. The NRPN082PAEN-RC is an active product with confirmed availability, ROHS3 compliance, and REACH unaffected status, meeting current regulatory requirements.

Q: What packaging is available for the NRPN082PAEN-RC?

A: The NRPN082PAEN-RC is supplied in bulk packaging, differing from the original part's unspecified packaging format.

Q: Are there any material differences between the two connectors?

A: The original part uses copper alloy contacts with thermoplastic insulation. The substitute uses brass contacts with polyamide (PA6T) nylon 6T insulation. Both maintain UL94 V-0 flammability rating and identical operating temperature range (-40°C ~ 105°C).

Q: Can the NRPN082PAEN-RC be used in applications designed for the 1-1470213-6?

A: The NRPN082PAEN-RC is suitable for applications where voltage requirements do not exceed 150V and current requirements do not exceed 2A. Applications originally specified for 250VAC operation require independent evaluation of the 150V rating against actual circuit requirements.