TE Connectivity Erni 114061 D-Sub Connector Housing - Equivalent & Substitute Parts

Part Overview

The TE Connectivity Erni 114061 is a D-Sub housing connector plug rated for 9 positions. This component functions as the housing shell for male contact D-Sub connectors in free-hanging (in-line) configurations. The part is classified as obsolete, necessitating identification of active equivalent components to maintain design continuity and ensure ongoing component availability for production and field service applications.

Substiute Parts

114061

TE Connectivity ErniIn Stock: 942114061 Datasheet

Current PartRFQ

1658655-1

TE Connectivity AMP ConnectorsIn Stock: 13691658655-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete TE Connectivity Erni 114061 is determined by strict equivalence across the following parameters:

Primary Substitution Criteria:

• Connector Category: D-Sub, D-Shaped Connectors
• Connector Type: Plug for Male Contacts Housing
• Number of Positions: 9
• Number of Rows: 2
• Shell Size/Connector Layout: 1 (DE, E)
• Mounting Type: Free Hanging (In-Line)
• Flange Feature: Cable Side (4-40)

Secondary Compatibility Parameters:

• Shell Material and Finish: Steel, Tin Plated
• Dielectric Material: Polyamide (PA), Nylon, Glass Filled
• Features: Backshell, Grounding Indents, Shielded
• Contact Type: Signal
• Product Status: Active (required for ongoing availability)

The substitute part must maintain identical mechanical and electrical interface specifications to ensure direct replacement capability without design modification.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: TE Connectivity AMP Connectors 1658655-1

The part 1658655-1 is the manufacturer-recommended substitute for the obsolete 114061. Selection of this substitute is based on the following engineering factors:

Product Status Alignment: The substitute maintains active product status, ensuring long-term availability, ongoing manufacturing support, and compliance with current supply chain requirements. The original part's obsolete classification creates supply risk and limits future procurement options.

Compliance and Certification: The substitute part carries ROHS3 compliance certification and maintains a valid ECCN classification (EAR99), meeting current regulatory requirements for commercial electronics applications. These certifications support deployment in regulated environments and international markets.

Mechanical and Electrical Equivalence: The substitute maintains identical connector specifications across all critical parameters: 9-position D-Sub plug configuration, male contact housing, free-hanging in-line mounting, and cable-side flange design. The specified shell material (steel, tin-plated) and dielectric composition (polyamide, glass-filled nylon) ensure equivalent electrical performance and environmental durability.

Series Designation: The substitute is part of the AMPLIMITE HDP-20 series, a current-generation D-Sub connector line from TE Connectivity, providing access to compatible accessories, backshells, and contact options within an active product ecosystem.

Packaging and Inventory: The substitute is available in bulk packaging with confirmed inventory of 1308 pieces, supporting both prototype and production-volume requirements.

Frequently Asked Questions (FAQ)

Q: Can the 1658655-1 substitute directly replace the 114061 in existing designs?

A: Yes. Both parts share identical connector type, position count, mounting configuration, and flange design. No PCB layout modifications or mechanical redesign is required for direct substitution.

Q: What is the significance of the AMPLIMITE HDP-20 series designation?

A: This series designation indicates the substitute part belongs to TE Connectivity's current-generation high-density D-Sub connector line. This provides access to compatible components, backshells, and contact assemblies within an active product family.

Q: Are contacts included with the 1658655-1 housing?

A: No. The specification explicitly states "Contacts Not Included." The housing shell must be assembled with appropriate male contacts separately. Verify contact specifications match the original design requirements.

Q: What is the difference between the Erni and AMP Connectors divisions?

A: Both are divisions of TE Connectivity. The substitute represents a transition from the legacy Erni product line to the current AMP Connectors portfolio, which maintains manufacturing continuity and design compatibility.

Q: Does the substitute meet RoHS requirements?

A: Yes. The 1658655-1 carries ROHS3 compliance certification, meeting current environmental and hazardous substance restrictions for commercial electronics.

Q: What is the shell finish thickness specification?

A: The tin-plated steel shell has a finish thickness of 200µin (5.08µm), providing corrosion resistance and electrical conductivity equivalent to the original design.

Q: Is the substitute suitable for shielded applications?

A: Yes. The specification includes shielded features and grounding indents, supporting EMI/RFI mitigation in signal integrity-critical applications.

Q: What packaging format is available for the substitute?

A: The 1658655-1 is supplied in bulk packaging, suitable for manufacturing and assembly operations.